For my part I have 2 receiver on different Antenna that are digipeated on only one RF transmitter.
And I’m connected to internet. So 3 ports:
Kiss Port1 RF - RX/TX
Kiss Port2 RF - RX if TX send to Port1
Aprs-Is Port3
And after Built178 no more TX
ve2pcq?
toggle quoted message
Show quoted text
Le lun. 10 oct. 2022 à 15:32, Andrew P. <
andrewemt@...> a écrit?:
Hmmm... Per chance, did you recently change to running a cross-frequency digipeater with multiple RF ports? Or did you recently add I-gating? I found a possible bug in the digipeat/I-gate logic that might affect the problem if there are multiple destinations a packet could be sent to, but it's not new.
Andrew, KA2DDO
author of YAAC
________________________________________
From: [email protected] <[email protected]> on behalf of Demetre - M0SUY/SV1UY <demetre.sv1uy@...>
Sent: Saturday, October 1, 2022 10:55 AM
To: [email protected]
Subject: Re: [yaac-users] DIGI broken in 178?
Andrew,
Actually the build we use at MB7UXX DIGI/IGATE is the 11 August 2022 build, not v177 as I said before and DIGI works in it!
So when we updated from this build to v178 DIGIpeating was broken.
Sorry about the mixup.
73 de Demetre M0SUY