开云体育

I have set my handie keys 1-8 to be 1.8Mhz to 24Mhz. They all work well. However nothing happens when I try to set key 9 to 28Mhz and also the key marked 50Mhz. Do I have a faulty handie or is this normal?

hello- one more feature somehow got accidentally turned off- when scrolling up and down the band, must be new feature also- mode will change from ssb to cw when you get in the more used mode of the band. somehow i must have disabled it. love the feature- how to re-enable it and how to disable it if no longer wanted- every radio made should have that feature tnx gregory bob donchez wb3hyb

looking for changes in printable form- (user manual ) been trying to narrow down bandwidth on cw but keep the tone at or around 750 - i change change the lower and high filters and narrow ut not centered on the beat frequency i listen to. i have the total operating directions for version 20- but i see some are the same but would like to find the newest version with the changes tnx- bob donchez wb3hyb

Hi all Got an X6100 (App 1.1.8 - Base 1.1.7) recently. Just started using it and I'm having intermittent problems with the tuning. Sometime it works OK. Other times it will tune down in frequency OK - tuning knob turned anti-clockwise and frequency goes down - but won't tune up - knob turned clockwise but nothing happens. Very occasionally it will tune down in frequency whichever way I turn the knob. There doesn't seem to be any pattern in the fault. Anyone any idea what's happening please?

I noticed, compared to factory firmware, that band up/ down buttons don't work as fast. Any ideas?

Updated R1CBU to .26 FW. I noticed that the up/down frequency buttons on top are slow to change bands. Any ideas?

Hi. Actual release available on the Releases page on GitHub. Significant changes - WiFi, FTx incremental decoding and support of CQ modifiers (SOTA, POTA, etc). This version based on updated linux image and using external FTx library - so it (possible) might have some bugs. Remember to copy files from DATA partition before flashing to save all parameters, logs, messages, etc. After flashing and first boot - copy these files back to DATA. 73. Georgy // R2RFE

Greetings from rainy San Salvador. A strange behavior from my Xiegu X6100. Good for documenting it at the collection of problems list with this radio. Today, went to a park trying to use my X6100 with an end-fed antenna. This antenna has been used before, no problems with the Xiegu tuner. First time it happens, my X6100 is receiving well, but whenever I transmit, when going back to RX, the RX goes down. It happens in all bands, all modes. As soon as I transmit anything, even for half a second, when I release the PTT or stop sending CW, the radio goes almost silent. No RX. The waterfall stops receiving. The only thing being shown in the waterfall are the birdies. Those are the only ones being shown. Nothing else. To get RX back, I have discovered that if I plug and unplug the external power plug, even with no power on that plug at all, then RX comes back. Also, it is doing this with Oleg's or with the original Xiegu system. I have the latest of both (Oleg's 0.23 and Xiegu V1.1.6). Whenever I transmit, the RX goes to zero. Have tried restoring to Factory Default to no avail. It continues to show this behavior. Any ideas of what could the problem be? Apart from this, everything works fine. Suggestions? Sending back to Xiegu from my country is not a viable option. We have services to receive from US but not the opposite way. Edit: Just discovered that, by simply touching the External Power socket with any metallic part, restores the RX in the radio. 73 Rob YS1RS

May I ask, which address do you guys use to report problems or software issues? Have written directly to Xiegu for a hardware problem (need to replace SMD failed components) and have never received a response. Support is nil, zero, nada. I may be writing to the wrong address (the one on Xiegu's web page customer@...; tech-supp@...). Tks. 73 Rob YS1RS

Looks like the x6100 would be capable of repeater operation if it only had PL tones. I've seen some discussion they are possible or coming, any news on this front? -- Stephen AC2GW

I haven't used my x6100 in over a year. I expected the official software to be updated by now to fix problems, I installed it, but it fails to set the time correctly from the ntp server, so I assume it's still buggy. So my question is what's the best firmware to run on this thing at this point -- Stephen AC2GW

Sorry if this has been covered before. When I plug external speaker in and switch SP mode to "Speaker" the volume drops to where it is difficult to hear stations with weakish signals even with volume at 55 and RF Gain at 100. When I switch to "Phones" it is much louder and easier to hear though audio quality seems worse. Could you tell me if this is working as designed and what the function of the switch is? Thank you very much, I really prefer this GUI to stock.

I updated to 2.6 yesterday - all worked OK This morning I’ve tried FT8. On starting a CQ call I can see a full 5W output and good SWR. After a few seconds the output drops to zero. All other modes are working OK with full output on all bands. I’ve tried booting with another 2.6 SD and I still have the problem. SWR and PSU is fine. Any ideas please ?

Topic says it all... BTW, Kudos to all the R1CBU developers! It's presentation is beautiful! Wish there was a manual... Just asking--Don't own a x6200, current software/firmware is a little too raw for my taste. Paul -- AI7JR

I’m having trouble syncing my X6100 when trying the FT8 / FT4 mode. Ive tried a couple of GPS modules but they won’t lock either.. Any ideas ? Also can someone please provide a link to the latest firmware release ?

Hello, Recently. my X6100 started having low RX (-122db noise or so) on startup. For a while, this could be remedied with a power cycle, but now that has stopped working. I've seen in a previous thread that this might be due to a stuck LPF relay, or the wires between boards controlling said relay. Does anyone have any experience with this problem? Thanks, Casey W7CLO

I've been exploring R1CBU V 25 on my x6100. Nice! But I've run into a problem-- I press the APP button and choose RTTY. Bar at the bottom changes to RTTY options, but none are exit! So, even if I press the GEN button the RTTY window continues to be displayed. I think the same thing happens with FT8, don't recall for sure. Shutdown and reboot, continues to show the RTTY window. :-( What am I doing wrong? 73, Paul -- AI7JR