开云体育

I figured it out for Windows 10/11. Downloaded a program called winscp, connect to the x6100 via lan. I have a usb-c to Rj-45 network interface adapter. Login as root/123 with winscp and

This firmware does not support WiFi settings (not at all)

Hi, is there a way to connect to Wifi using speech prompts, If not suggestions on if it can be done, IE steps to connect using R1CBU-Firmware? Thanks

We'll have to wait, there may be more bug fixes. I don't have the ability to make a "full release" for each patch

Oleg ... please make a complete FW – like v.20.1 - for download which has included the patch-file and changings ... I have problems installing the patch separatly ... Sorry . Jens /

This is done automatically at system startup if a patch file is detected in /mnt

Updating to the latest firmware became a huge headache. After flashing into the X6100 the radio stopped RXing or TXing. All multi-function buttons worked but the TX button would not. Several attempts

There is a windows program called WinSCP ( https://winscp.net/ ) that you can use to transfer the file to the X6100 as long as you have the X6100 on your network, such as with a USB Ethernet or WiFi

Ok. I don't have a linux system to read the sd.? Is there a windows app that can see the linux partitions and if there is do I copy the .tgz compressed file or on pack it and transfer the files

I'm always surprised to see that so many radio hams still use Windows, surely not the best OS for technical matters that we OMs deal with. OMicalement, Michel de F5UJA

Worked well using Linux Mint. Windows wants to format the card since one of the partitions is unreadable. A good reason to keep a Linux machine around, even if you normally use Windows.

There are two most common FAT partitions on the SD card. It's a surprise to me that Windows can't handle this!

From reading this, I assume you need a Linux OS to install the patch. Is this correct?

Thank you Oleg for your response. It is very clear. 73 Rob YS1RS Sent from my iPad.

When installing the patch, the params.db settings file is reinstalled. This is necessary to add 6m band for FT8/FT4

OK, the Micro SD is not formatted for Windows. You use your Windows computer together with a tool called Balena Etcher only to image the SD card, but the format in the card is not Windows. At least,

The SD card has 3 partitions: Boot, DATA, rootfs. Y ou need the partition where the params.db file is already located

Sorry, an update here! My son just reminded me that YES, it had the CW TX TONE all the time. The red led was ON and was transmitting continuously. The small Dummy Load was starting to get warm when I

I had a similar situation. In my case it was not a tone. The radio went on transmit (TX) and stood there. Nothing worked. Software Reset didn’t solve it. Nothing. Had to open the back and

Oleg, There is only the volume folder and the root directory.? Where is the data folder?? I've pulled the microsd and put it into my windows system. I placed the .tgz file in the root directory. on