开云体育

Hi dick, found solution thanx to another member it's in settings the option mag, alc switch mag off and it disappears. Been searching for this now for 6 months, so glad I joined the group, thankyou

Hi Dick, Thanks for chiming in! Good to know I am not the only one. I don't find anything about this online, but I will search further, 73, Janos ON4JBS

I have experienced the same. 73' Dick

Thanks John!!! [email protected]> wrote:

Funny you asked, I just upgraded and just turned it "off".? "APP" button twice to find "Settings", Use "MFK" knob to scroll down to the "Mag Freq. Info, ALC" line. Pic the first slider and push the

I can't find a magnification setting in the latest version. <pendleeuropa2000@...> wrote:

Thankyou .... Top man !!! [email protected]> wrote:

Look in the "Settings" for "Magnification".? I don't have my radio in front of me, but I believe you can adjust Freq, Band Info, and ALC see: https://github.com/gdyuldin/x6100_gui/wiki/Settings

how do you remove the annoying large frequency display thats over the top of the small one, looked everywhere for it. seen a video of 30.0 where the freq display is removed thanx....

Hi, As I experience, sending a CQ ( stored in messages ) is a hit and miss. Sometimes it is almost correct, sometimes very badly translated to CW. I mean, it is sending wrong letters frequently, not

Thanks Georgy, Sounds good to me! 73, Janos ON4JBS

I decided to make the min/max range fixed because for some cases waterfall looks too noisy (when whole dynamic range of the signals is not so big). I guess it worth to add some configurable offset for

think this might begun here ( Set WF/spetcrum range to 48db ): https://github.com/gdyuldin/x6100_gui/commit/b38d099

https://photos.app.goo.gl/uEXDh8pS8pGE1A766 Here's a screenshot that shows it. I've noticed this for lots of previous versions, so it's not new. It always seems like the "0" line of the spectrum is

@John Flinchbaugh: could You please post here a screenshot about the spectrum level issue, my equipment is already packed in - we are moving to a new house ;-), 73, Janos ON4JBS

I didn't see changes of the spectrum level for last versions on my radio, but I didn't check 0.30.1, that built on GitHub, just using my own compiled version. Let me check 0.30.1 from releases page.

I'd love to see the auto min/max show the spectrum just a little higher. I also see the behavior Janos is observing. I had switched back to manual spectrum and waterfall for a bit, but decided it was

Hi Georgy, One question about the present version 0.30.1. As I see, the minimum level of the spectrum is too low ( I just see the top of the signals ), and I don't find a way to lift it above the

Many thanks Georgy, it is indeed fixed now!! 73, Janos ON4JBS

This ( https://github.com/gdyuldin/x6100_gui/releases/tag/v0.30.1 ) version should fix this issue. -- Georgy // R2RFE