use the full weather report
Huntsville, Madison County Executive Airport, AL, United States
(KMDQ) 34-51-41N 086-33-26W
Jun 10, 2021 - 09:15 AM EDT / 2021.06.10 1315 UTC
Wind: from the S (190 degrees) at 8 MPH (7 KT):0
Visibility: 10 mile(s):0
Sky conditions: overcast
Temperature: 72.7 F (22.6 C)
Dew Point: 68.2 F (20.1 C)
Relative Humidity: 85%
Pressure (altimeter): 30.03 in. Hg (1016 hPa)
David
On 6/10/21 7:04 AM, Dave Tucker Nu4N
wrote:
toggle quoted message
Show quoted text
Now that we are the high temp and high humidity it would be nice
to have the humidity in our wx macro. But I guess NOAA doesn't
provide that info.
Just a thought.
--
73 NU4N Dave
|
Now that we are the high temp and high humidity it would be nice to have the humidity in our wx macro. But I guess NOAA doesn't provide that info.
Just a thought.
--
73 NU4N Dave
|
Re: Fldigi on Raspberry Pi Zero
Very interesting about getting Fldigi working on the RPi-zero, especially the part about taking "less than 24 hours for the script to build". I did not wait nearly that long and it appeared to have just locked up on my Pi, so maybe I will try it again. I have used Fldigi on my desktops for many years and like it for the modes it supports, so it would be nice to have a consistent interface in teh field. The author of LinPSK was very helpful correcting the initial rig control and logging issues I had and I have been using that, but I may try Fldigi again.
=Vic=
|
Re: Fldigi on Raspberry Pi Zero
I found your discussion while I was searching for info on running Fldigi & Flrig etc on a Raspberry Pi Zero W.? I've been successful with rig control of my Xiegu X1M (acting as an IC-718) using Flrig, and also decoding CW with Fldigi.? While decoding CW, my Raspberry Pi Zero W uses 50% of the RAM and 40% of the CPU.? Once I had the volume level adjusted appropriately, it was accurately decoding CW from the sample YouTube recordings I found at 15WPM and 18WPM.? The audio hardware is an inexpensive USB audio dongle made by Vention.? The Pi Zero W also successfully got time and location updates via a Ublox-7 USB dongle.? Besides Fldigi, the only other significant users of the Pi's CPU were the vncserver and Xorg processes -- I'm interacting with the Pi Zero W via VNC over WiFi.
The Fldigi set of utilities were compiled on the Pi Zero W itself using a script provided by an organization called "AmRRON" (gitlab.com/amrron/setup-scripts). I learned about this script via a YouTube video from OH8STN entitled "Ultimate Raspberry Pi Build | Ham Radio".? He uses a Pi 3B+, and I was curious whether my Pi Zero W could also do the job.? So far so good.? It took less than 24 hours for the script to build all the components.? There are times when you need to respond to the prompts from the script.
I don't have much experience with amateur radio digital modes; this is my first attempt to put something together.? Eventually I'll need to determine whether my Pi Zero W is sufficient, or whether I need to get myself a more powerful Pi.
|
Installed the latest flrig. Starting up seems to be a lot quicker. On an IC-7300, the gap between setting VFO-B and back to VFO-A used to be about half a second, now it's almost instantaneous. I can just about hear a double click of the band relays.
Thanks Phil.
|
What is the format ? adi or adif.
Ed W3NR
|
How do I change the log file? I have it set for a USB drive but would like it under FLDIGI folder??
--
73 NU4N Dave
|
Re: No PSK reports in PSK Reporter.
#fldigi
Hey Bill. works like a charm !!! Thanks so much 73's Dave NU4N
/2021 4:31 AM, David Tucker wrote:
toggle quoted message
Show quoted text
No Bill I dod not have the SPOT button turned on. Never thought of
that, Yes I? do have my antenna info out it.
Thanks Bill that's great !!!
73 NU4N
On 6/6/2021 5:09 PM, William Wagaman
wrote:
Hello Bill here N3GTY question do you have spot enabled top
right side of screen? Under Spotting do you have spot call in
decoded text and do you have your antenna defined in your user
information just a few things that might keep you from
spotting. bye for now Bill
On 6/6/2021 5:27 PM, Dave Tucker
Nu4N wrote:
?I Have all the parameters set in FLDigi. Even shows I am
connected to PSK Reporter. I also have HRD and it reports
just fine. I am not showing anything in PSK reporter such as
antenna,lotw nor version of software. I see others using
FLDIGI versions and they are showing just fine. I have a
100% internet connections at all times.
Dave NU4N
On 6/6/2021 4:18 PM, Gene Rowzea
wrote:
Not a lot of information to work with.
I am? not getting reports to PSK reporter in the latest
version.
Any help would be appreciated,
--
73 NU4N Dave
--
73 NU4N Dave
--
Bill Wagaman N3GTY
--
73 NU4N Dave
|
Re: No PSK reports in PSK Reporter.
#fldigi
No Bill I dod not have the SPOT button turned on. Never thought of
that, Yes I? do have my antenna info out it.
Thanks Bill that's great !!!
73 NU4N
On 6/6/2021 5:09 PM, William Wagaman
wrote:
toggle quoted message
Show quoted text
Hello Bill here N3GTY question do you have spot enabled top
right side of screen? Under Spotting do you have spot call in
decoded text and do you have your antenna defined in your user
information just a few things that might keep you from spotting.
bye for now Bill
On 6/6/2021 5:27 PM, Dave Tucker Nu4N
wrote:
?I Have all the parameters set in FLDigi. Even shows I am
connected to PSK Reporter. I also have HRD and it reports just
fine. I am not showing anything in PSK reporter such as
antenna,lotw nor version of software. I see others using
FLDIGI versions and they are showing just fine. I have a 100%
internet connections at all times.
Dave NU4N
On 6/6/2021 4:18 PM, Gene Rowzea
wrote:
Not a lot of information to work with.
I am? not getting reports to PSK reporter in the latest
version.
Any help would be appreciated,
--
73 NU4N Dave
--
73 NU4N Dave
--
Bill Wagaman N3GTY
--
73 NU4N Dave
|
Thanks Default was http Changed and now working LTB
toggle quoted message
Show quoted text
On Jun 5, 2021, at 2:52 AM, roland.hartmann@... wrote:
? Hi Dave, ? thanks for answer. Even I do not use the WX Feature, I was interested in. Have tested and changed to https. Maybe for other user who are reading¡ Simple command: <TX> Test-1: <WX> Test-2: <WX:EDDK><RX> <image002.png> ? Show in Version 4.1.18 (no Alpha) only one entry (For Test-1 without parameter). With version 4.1.18.40 current Alpha it present two results. Means whatever was wrong ¨C it is fixed in the Alpha-Versions. ? For me all is fine¡ 73 de Roland DK4RH ? ? Roland,
<WX:EDDK> works OK.
<image001.png> The original poster's problem was caused by entering in lieu of "" for the Access URL. David Maybe helpful to locate the issue¡ I have also fldigi 4.1.18 and tried a little bit. What is working: <WX> without additional parameter. I tried KMDQ? (default) and EDDK (near to my location). Has to be set in the WX-Configuration part. Not working is, if I try? <WX:KMDQ> or <WX:EDDK>. Equal if the same or another value is set in the WX-configuration part. Seems giving the parameter do not working ? ? 73 de Roland DK4RH ? ? Older versiions and grasping at straws ... neither will solve the problem.
Send me a copy of this file "fldigi_def.xml".? Find it easily by using the fldigi menu item "File/Folders/Fldigi config ...".? Send it to my bellsouth.net address.
David On 5/29/21 7:57 AM, David Tucker wrote: Well I did a re-install and it didnt work. Do u have copies of the older versions?? May try that and see what happens. ?
?
?
|
Re: No PSK reports in PSK Reporter.
#fldigi
Hello Bill here N3GTY question do you have spot enabled top right
side of screen? Under Spotting do you have spot call in decoded
text and do you have your antenna defined in your user information
just a few things that might keep you from spotting. bye for now
Bill
On 6/6/2021 5:27 PM, Dave Tucker Nu4N
wrote:
?I Have all the parameters set in FLDigi. Even shows I am
connected to PSK Reporter. I also have HRD and it reports just
fine. I am not showing anything in PSK reporter such as
antenna,lotw nor version of software. I see others using FLDIGI
versions and they are showing just fine. I have a 100% internet
connections at all times.
Dave NU4N
On 6/6/2021 4:18 PM, Gene Rowzea
wrote:
Not
a lot of information to work with.
I am? not getting reports to PSK reporter in the latest
version.
Any help would be appreciated,
--
73 NU4N Dave
--
73 NU4N Dave
--
Bill Wagaman N3GTY
|
Re: No PSK reports in PSK Reporter.
#fldigi
?I Have all the parameters set in FLDigi. Even shows I am
connected to PSK Reporter. I also have HRD and it reports just
fine. I am not showing anything in PSK reporter such as
antenna,lotw nor version of software. I see others using FLDIGI
versions and they are showing just fine. I have a 100% internet
connections at all times.
Dave NU4N
On 6/6/2021 4:18 PM, Gene Rowzea wrote:
toggle quoted message
Show quoted text
Not a lot of information to work with.
I am? not getting reports to PSK reporter in the latest
version.
Any help would be appreciated,
--
73 NU4N Dave
--
73 NU4N Dave
|
Re: No PSK reports in PSK Reporter.
#fldigi
Not a lot of information to work with.
toggle quoted message
Show quoted text
I am? not getting reports to PSK reporter in the latest version.
Any help would be appreciated,
--
73 NU4N Dave
|
No PSK reports in PSK Reporter.
#fldigi
I am? not getting reports to PSK reporter in the latest version.
Any help would be appreciated,
--
73 NU4N Dave
|
Thank you for the report
Chip.? It's impossible for me to personally test all 90
supported transceivers, so I rely on user reports of success and
failure.? Success is much sweeter music.
Dave, W1HKJ
On 6/6/21 10:50 AM, Chip Coker KD4C
wrote:
toggle quoted message
Show quoted text
I want to thank Dave & crew for FLrig 1.4.0!? I have been
using FLRig since I started using digital modes with FLdigi and
WSJT-X, but the 1.3.50+ versions had become very erratic with my
(old) Kenwood TS-140S.? After WSJT-X version 2.3.0 upgrade, it
would no longer work with FLrig so I had to directly control the
rig with WSJT-X.? With FLdigi, FLrig frequency would flicker at
least 5-10 times a minute (which I assumed was a polling error) so
it was almost unusable.
I can happily report that with 1.4.0, all my issues seem to be
gone!? FLrig is stable and much faster, with no frequency
flickering/polling problems, and WSJT-X again works with FLrig
with no issues and hamlib errors.? Life is good again (at least on
20M)!
Thanks Dave!
'73 Chip KD4C
|
Re: Contest Dupe not working
Disconnecting the ACL logging also cleared up another problem that perplexed me.
On the FlDigi screen in the upper right is the frequency display - the larger of the two display. The other is the QSO frequency shown above the QSO Call.? This is set manually to the radio's dial frequency. (not using any CAT).? Sometimes it would change when you click on a different spot on the waterfall.? The value of the waterfall spot would be added to the original dial frequency. Which at first seems what it's supposed to do, but the QSO frequency display changes again. Now it will shows a frequency value of the original dial frequency plus two times (2X) the waterfall spot value. This then would get logged, which is incorrect.? ? So somehow the ACL is screwing up the frequency displays in FlDigi.
I have seen this problem for sometime now.? No upgrade has seemed to fix the problem.
Don K9DEB
|
I want to thank Dave & crew for FLrig 1.4.0!? I have been using FLRig since I started using digital modes with FLdigi and WSJT-X, but the 1.3.50+ versions had become very erratic with my (old) Kenwood TS-140S.? After WSJT-X version 2.3.0 upgrade, it would no longer work with FLrig so I had to directly control the rig with WSJT-X.? With FLdigi, FLrig frequency would flicker at least 5-10 times a minute (which I assumed was a polling error) so it was almost unusable.
I can happily report that with 1.4.0, all my issues seem to be gone!? FLrig is stable and much faster, with no frequency flickering/polling problems, and WSJT-X again works with FLrig with no issues and hamlib errors.? Life is good again (at least on 20M)!
Thanks Dave!
'73 Chip KD4C
|
Re: Contest Dupe not working
Bobby/N4AU
Thanks, that did the trick.? Though I would still like to have the contact logged to the ACL file at the same time FlDigi logs it.? Kind of a backup.
I have seen were for what ever reason a contact was logged in ACL, but not in the FlDigi file.? ?Had to resort to a paper 'Dup" sheet.
Don K9DEB
|
Re: Contest Dupe not working
Hi Don,
It didn't work for me until I turned off ACLog and used the contest log only.
Bobby/N4AU
--
n4au@...
n4au@...
|
Re: Contest Dupe not working
Still not working for me.? ?Here is screen shot of the contest configuration screen 
|
Dave
Vic WA4THR
Philip Rose
