开云体育

I have to echo the above suspicions about RFI. Program crashing plus the transceiver locked in transmit sounds very RFI-Like. In addition to the suggestions about grounding and using ferrites, I have

Make sure each piece of station equipment is bonded to a single common point. This includes the station computer as well. I make my bonding jumpers using #10 AWG auto primary wire with a ring

Start looking for RFI. By some Toroids and place them on everything. It was my cure to strange effects going on on my computer with certain programs. 73 Rick N2AMG

Good evening PD1ANB, If you had a previous installation of a (somewhat) older FLdigi version, it might be a configuration incompatibility issue. Many new features have been added over the years

Strange problem, I have re-equipped my computer with fldigi, but now a strange problem occurs, when I start transmitting my fldigi screen disappears and it stays on transmitting. I have never had

An excellent day for everyone. I kindly ask you to see the attached images. The indicated Power~encia of 20 W in the FLRig is ok and is the same in the Radio - TS - 990 , but the bargraph sampling is

If you want that kind of operational display asking FLTK developers for the feature. FLDIGI developers can modify another variant of the FLTK UI elements, but this introduces divergent issues down the

Why would you want fldigi to be an HF/VHF cell phone? [email protected]> wrote:

bump. There's Windows fonts that support emoji. Noto Color Emoji, but doesn't seem to work in FLDigi. FLDigi seems to be limited in producing these in monochrome. Still learning. Would love to see

Colleagues I would like to receive from you some feedback on FLRig + TS990. 1- I can ' t get an indication of the SWR value , even though it ' s a value that is purposely high due to antenna

Very good info, Daniel! Also, of course it's good to turn off all audio effects or enhancements.? If you run multiple digi mode programs at the same time, you need to uncheck "Allow applications to

Silly question, I suppose...have you checked the voltage at the radio?

OK I got it working.? The Baud rate had to be set at 38400.? It works on that rate but would not work at 9600 even if the rig were set there as well. Frustrating remembering this stuff after you

I must have a setting off in my FT 450D. I have used it for years but my FT 450D has been acting strange so I did a hard reset and cannot seem to connect to FLRig or FLDIGI after the reset. I have

I will look into it and get back to you. 73, David, W1HKJ [email protected]> wrote:

Hi: [Thought i had posted this last night but did not see it.] Thank you for everyone's work and help for fldigi/flrig. Is it is possible to add CAT/CI-V support for Icom ID-5100 - it seems it is not

Hi: Thank you for everyone's volunteer work for flrig/fldigi. Have been looking for CAT/CI-V support of the ICOM ID-5100 - it does not seem to be directly supported yet in flrig/fldigi - wondering

The biggest gotcha is with Windows 11. It adds some extra sound configuration capabilities that require configuring which were not available or required under Windows 10. In Windows 10, all you had

Ok Dave Thanks, that must be the case then. It is actually a third party app talking to flrig over the api port where I noticed. Like KD4C noted that if I use the bands on the radio and/or the

I use FLrig extensively with my FTDX-10 and have not noticed the behavior that you mentioned.? I use the "band" buttons on FLrig to change the band on the radio (and to cycle through the band