开云体育

bump. There's Windows fonts that support emoji. Noto Color Emoji, but doesn't seem to work in FLDigi. FLDigi seems to be limited in producing these in monochrome. Still learning. Would love to see

Colleagues I would like to receive from you some feedback on FLRig + TS990. 1- I can ' t get an indication of the SWR value , even though it ' s a value that is purposely high due to antenna

Very good info, Daniel! Also, of course it's good to turn off all audio effects or enhancements.? If you run multiple digi mode programs at the same time, you need to uncheck "Allow applications to

Silly question, I suppose...have you checked the voltage at the radio?

OK I got it working.? The Baud rate had to be set at 38400.? It works on that rate but would not work at 9600 even if the rig were set there as well. Frustrating remembering this stuff after you

I must have a setting off in my FT 450D. I have used it for years but my FT 450D has been acting strange so I did a hard reset and cannot seem to connect to FLRig or FLDIGI after the reset. I have

I will look into it and get back to you. 73, David, W1HKJ [email protected]> wrote:

Hi: [Thought i had posted this last night but did not see it.] Thank you for everyone's work and help for fldigi/flrig. Is it is possible to add CAT/CI-V support for Icom ID-5100 - it seems it is not

Hi: Thank you for everyone's volunteer work for flrig/fldigi. Have been looking for CAT/CI-V support of the ICOM ID-5100 - it does not seem to be directly supported yet in flrig/fldigi - wondering

The biggest gotcha is with Windows 11. It adds some extra sound configuration capabilities that require configuring which were not available or required under Windows 10. In Windows 10, all you had

Ok Dave Thanks, that must be the case then. It is actually a third party app talking to flrig over the api port where I noticed. Like KD4C noted that if I use the bands on the radio and/or the

I use FLrig extensively with my FTDX-10 and have not noticed the behavior that you mentioned.? I use the "band" buttons on FLrig to change the band on the radio (and to cycle through the band

The command sent is the "FA....;" sequence for setting vfo A, or "FB...;" for setting vfo B. The C++ code for the FTdx10 is attached. Look through it to see the command sequence for the supported

Hi, I wonder if there is something in flrig that when you change bands via set vfo that flrig sends the state of tuner on or off to the next band? Is this by intention or lack of some feature? I

I just typed 'yaesu 710 fldigi' into a search engine and found a ton of info. Here's a video on setup with PSK31 but the setup should be basically the same as for

Hello George, Also see the attachment... 73s Tobias .-.-. Am Freitag, 18. April 2025 um 21:16:37 MESZ hat SWL Tobias via groups.io <tsquare123@...> Folgendes geschrieben:

Hi George, Right Click on the RxID Button + select Passband. 73s Tobias .-.-. Am Freitag, 18. April 2025 um 21:06:08 MESZ hat George Stein - NJ3H via groups.io <nj3h@...>

Hello I looking for some Youtube videos google searches have not come up with any thing on how to configure my Yaesu Ft 710 and Dell G-3 Laptop running Windows 11 Home edition with FLDIGI (Olivia)

Greetings, Please see the attached picture.? What are the dashed lines for? Is there a way to not have them displayed? Regards, George

Thanks Mike, Joe and Dave. It looks like he will be OK for rig control. If it is a pre 8G05, FLrig may not like it. Hope not! 73 and Happy Easter de VE3YX