开云体育

Look in the commands list for the function keys. There are some that say stuff like <CLEAR> or similar . Add that in the function that says <LOG> [email protected]> wrote:

You should check Configure -> Config Dialog -> QSO Logging and make sure that "Clear on save" is checked. 73 Haris SV1GRB

Never heard on the question of the entry fields not clearing when logging the contact.? Any help out there on what setting could be messed up?? -- Karl K0CIE

Nobody ever got an answer here did they? I had to reinstall mine (FLRig 1.4.7.46) from scratch and almost didn't get it working, I had to change the write time above the Init button to get it to

Hi Robert, I have been occasionally experimenting with using the KISS interface this way (on HF). Pinpoint APRS >> fldigi KISS in THOR - that is stable and works well (until the shut down "bug"). I

Hi Dave, Thanks, I have done that and still have the problem, usually with the first instance invoked, sometimes the second and third. I'll try other combos of up and down if you want. I have tried

Jack, What do you mean by "KISS" protocol, the one used by TNC's? I do know that the KISS interface in FLDIGI has some issues. The only one have been able to verify is that KISS interface doesn't

Jack, Try closing flrig first and then the fldigi instances. David [email protected]> wrote:

Along the same lines....yesterday I installed a second instance of fldigi onto my Windows 10 machine. I now have one instance (original) working with my TS590SG using Rig CAT XML file and the second

Mostly addressed to Dave (W1HKJ) but also looking for others experiences: Scenario: I am now running current alphas of fldigi and flrig (autostarted) on a gamer Win11 workstation, but have seen this

correction...correction i copies and pasted wrong info.. here is correct.. jim i noticed a problem with wsjt-x and flrig with my ic7300 sometimes when i switch to a different config i had

i noticed a problem with wsjt-x and flrig with my ic7300 sometimes when i switch to a different config i had saved... wsjt-x would not connect with rig ctl...it wanted me to reconfig rig ctl... after

Hi Jack, yes I did get some ideas and also reread the manual and now my qmx will operate with FT8CN for ultra portable operating. I will let you know if I get it working with fldigi. I want to use it

Randy, Let me know how it goes. I have a QMX+ that I need to configure on a Win11 laptop. I saw that you had asked a different question on another forum. Did you get an answer there? */Jack

Thanks for the help, I understand how to do it and have created a second path for my QMX. When I get home this evening I will get it connected and hopefully setup and running. Randy VE3JO

Randy, Sometimes a "step by step" says it best. You can make fldigi run in multiple "instances" - at the same time. Only one copy of fldigi.exe needs to be on your computer. My situation: I use both

Hello Randy, Please refer to my topic 2 below. Regardless of the OS version, by creating different shortcuts referencing to different data folders, you can configure and run 'independent'

Could some one please explain to me step by step how to create a second instance of fldigi on windows 11. For some reason I am not grasping the concept. I would like to have another setup for my qmx

I would also like to point out another technicality about the OFDM modes in FLDigi in general. They technically are just multi-carrier modes, not OFDM. OFDM means that the spacing of the carriers is

Hey Dave thanks for the reply. Well finally after checking my settings I now have full 20 watts out. Works great now. Appreciate the help. Dave -- 73's de NU4N