开云体育

Thank you for the bug report Graeme.? I confirm that this is occuring and will do further testing and coding to correct the problem. David, W1HKJ

Hi David, Thank you for your ongoing efforts! I little observation since updating to this version. The waterfall colour scheme seems no longer to be honoured after changing it from default, closing

You do not and that is not the recommended installation.? You install a single copy of fldigi, flrig, etc.? Then you create a desktop launch icon with the properties set to allow each to run an

Thank all of you for the replies.? I'm fixing a new computer and use the same radio, but need two different copies of Fldigi for two different services . Appreciate it 73 KG5KS

Copy the shortcut and modify the properties to add a switch to the command line. ??--config-dir DIRECTORY ????Look for configuration files in DIRECTORY ????The default is:

I do this all the time, but I use the standalone config, not the installed versions of the programs. Both ways are described in the Help docs. Note that having multiple installations is not the same

Yes. It’s a standard topic in the Help. I have two radically different radios, an Icom 735 and a Yaesu 991A. I use the former with a Rig Blaster. I have two separate copies of both FLDIGI and FLRIG

Just wondering if I could have two separate installs of Fldigi on computer and same hard drive? Thank you 73 KG5KS

Doug, I use the 950, however I do not use flrig, I use rigcat and have used hamlib in the past.? I still might be able to help you, so shoot me an email, good on QRZ.com. 73 John KC3FL

Looks like groups.io did not like my PowerPoint attachment. It can be found at:

I am successfully using FLDIGI itg an IC-7100. The IC-7100 setting I am using are as shwn in: http://www.gwinnettares.org/wp-content/uploads/2018/04/FLDIGI%20and%20IC-7100%20(rev).pdf [image:

#1 Set up a virtual com port pair -- com0com or Eltima (assuming Windows)? -- let's pretend you set up COM5/COM6 #2 Set up FLRig to talk to your rig #3 Set WSJT-X to use FLRig? #4 Run rigctlcom

I could use a little more explaination. [email protected]> wrote:

thanks Phil, but I must say that I had flrig connected to fldigi and fldigi connected to n3fjp. All operating together perfectly with the IC-7100. Flrig would set the band on all software and fldigi

I am STRUGGLING to get fldigi and flrig to work. Currently opening FLRig activates the PTT on the transceiver and the only way to stop it is to restart the transceiver. From there I can adjust things

Yes, This was covered here on the group recently on msg Mar 23 #36250 ( /g/winfldigi/message/36250 ) 73 vk4tux

And preferably the ACC2 adapter is connected to pin 9 and not pin 13 so that the mic gets muted. Otherwise you have to turn down the mic gain to ensure you don't mix room noise with your signal. Mike

I think I've got the setup running now! *THANKS TO ALL OF YOU!* I'll give it a try tomorrow whenn the contest is over :-) It'll be my very first contact with FLDigi.... I'll let you know! 73 de Ben

Ben: Ensure that in the FLrig set up, PTT by CAT is NOT selected. PTT by CAT takes precedence over any other PTT selections and CAT PTT will cause the 2000 to use mic and spkr for audio instead of

Look in the messages history of this group for message #33584 which has a useful description for a configuration like yours.