On Sunday, October 13, 2024 at 09:23:28 AM CDT, Adrian Fewster <vk4tux@...> wrote:
I agree, and have seen this happen before, cat ptt will enable the front audio path rather than the rear ACC audio path activated by vox.
In wsjtx? vox was probably selected for ptt, hence why it worked.
Signallink does the vox ptt switching without cat or comport input.
73
vk4tux
On 13/10/24 23:52, gqwradio via groups.io wrote:
??
Ben:
Ensure that in the FLrig set up, PTT by CAT is NOT selected. PTT by CAT takes precedence over any other PTT selections and CAT PTT will cause the 2000 to use mic and spkr for audio instead of audio to/from the 13 pin AUX connector.
I hope that fixes your problem!
73 de Bob?? VE3YX
On 2024-10-13 07:20, Herr K wrote:
??
Hello everybody!
I'm struggling with my TS2000 along with a SignaLink SL-1+ to work with FLDIGI.
First of all: I'm using this setup succesfully for a long time now with WSJT-X.
My notebook is connected via USB to the TS2000 and via 3,5mm Headphone-Jack to the SignaLink. The SignaLink is connected to the TS2000 via the 13-ACC-Connector.
?
Now to FLDigi:
In order to make the connection between the TS2000 and my notebook I'm using FLRig. So far so good.
This is my problem:
My notebook (FLDigi) is hearing the signals but only through the microphone of my notebook. If I turn down the volume of the TS2000 no signals are being decoded....
Sending is about the same problem: If I hit the tune-button of FLDigi the TS2000 switches to transmit but the SignaLink doesn't switch to "PTT" and the TS2000 expects audio from the microphon....
I've tried so many settings but all in vain.... It's driving me nuts.
Does anyone have a solution how to setup TS2000 along with the SignaLink SL-1+ to work with FLDigi? PLEASE HELP!
?
VY73 de Ben (DL4DBM)
