开云体育

I tried flrig 2.0.05.75 on linux and I selected FT-747GX. When I try to initialize it freezes the radio. I have to turn it off and on again to unfreeze it. I also checked fldigi and this doesn?t

http://www.w1hkj.com/files/flamp Index of /files/flamp * Parent Directory <http://www.w1hkj.com/files/> * Amp-2.V3.0.Protocol.pdf <http://www.w1hkj.com/files/flamp/Amp-2.V3.0.Protocol.pdf> *

Same result, it still isn?t sending the 2 stop bits. I noticed it says "DCB.StopBits 0" I guess it should say "DCB.StopBits 2". Also, it says "expected 28 bytes" but the radio sends 345 bytes. Here

Try this version...there was a change that removed the 0xFA http://www.w1hkj.com/alpha/flrig/ Mike W9MDB

suggest you try the latest development release which was posted this morning at http://www.w1hkj.com/alpha/flrig/ Note this is NOT a secure URL.? If you allow your browser to force https you will be

Yes, I did click on the save button. There is definitely an issue with the windows version of FLRIG 2.0.05. FLDIGI does work with the FT747. It changes frequencies but it also fails with the init

I use 7-zip all the time...but my action of choice is to right click the file in the Windows file manager from the context menu...with options created by installing 7-zip... ...I choose... Extract to

Bill, Just like Rich wrote, if setup doesn't run as expected (and provided you have downloaded the correct FLdigi setup file!) it may make more sense to extract (unzip) it directly into the new folder

Can you test WSJT-X-Improved to see if it works with the FT747? https://sourceforge.net/projects/wsjt-x-improved/ Then we can compare debug logs. Or if you contact me off-list maybe we can hook up

Last night I re-installed FLRIG 2.0.05 freshly downloaded from Sourceforge. It installed and controls FLDIGI correctly, to operate an IC7300. I don't think that the "problem" resides in the two

I can do the testing for the Yaesu FT-80C or the FT-747 because they are almost the same and I have the 80C. I forgot to mention that the issue of the stop bits happens only in the windows version. I

Ok, well hopefully Dave will be able to check the code and find the issue. One of the big challenges is that he does not have any way of actually testing on many of the rigs to verify the code. 73,

I never install it, because of the way I use it. Installations always result in conflicts with the constant changes I make to my systems. I unzip, and run from there. I wondered at the choice of

Hi, yes. Changing them makes no difference. I also noticed that it does not detect the FT-747 because it sends an instruction that the radio does not recognize. The instruction is 0xFA.

Index of /alpha/flrig * Parent Directory <http://www.w1hkj.com/alpha/> * darkscheme.UI.prefs <http://www.w1hkj.com/alpha/flrig/darkscheme.UI.prefs> * flrig-2.0.05.75.dmg

Did you have the 2 Stopbits checkbox checked on the Transceiver config page? 73, Cliff, AE5ZA

I set up a folder on my C:\ drive called FL_APP, saved the fldigi-4.2.05_setup.exe file to that folder, and double-clicked it.? I get a window asking me to login as Administrator, which I do, after

Hi, I?m using flrig v2.0.05 with a Yaesu FT-747 and it doesnt work. Upon further debuggin with a logic analyzer I found out that it does not set 2 stop bits. How can I solve this issue? I?ll attach

Rich, To be on the safe side, I just went a step further and submitted the original zip I had forwarded to the FLdigi group today to a renowned online meta-checker which includes M-Soft any many

I assumed they are clean after several non-MS checkers all agreed they are clean. I tried to submit it to MS, but I needed to login, so skipped that step. In retrospect, I don't think it will do any