¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Winfldigi
  2. Messages
Single Messages Topics Expanded Polls

Re: flrig v2.0.05 has a problem setting 2 stop bits

 

Last night I re-installed FLRIG 2.0.05 freshly downloaded from Sourceforge. It installed and controls FLDIGI correctly, to operate an IC7300.

I don't think that the "problem" resides in the two programs themselves. Be sure that -after setting the stop bit 2- you go to the bottom of that screen and choose SAVE or INITIATE.

Also, on the FLDIGI Configure tab there is an option to SAVE SETUP.

73
Bill K2TNO?

On Sun, Sep 15, 2024, 11:14?PM nico-florio via <nico-florio=[email protected]> wrote:
Hi,
?
I?m using flrig v2.0.05 with a Yaesu FT-747 and it doesnt work. Upon further debuggin with a logic analyzer I found out that it does not set 2 stop bits. How can I solve this issue? I?ll attach a trace debug generated by flrig. Thanks!
?
12:50:23.300 : closeRig()
12:50:23.300 : close serial port
12:50:23.378 : clear frequency list
12:50:23.378 : initialize title bar
12:50:23.378 : start tranceiver serial port
12:50:23.532 : I: OpenPort: Open Comm port //./COM7 ; hComm = 988
?
?
12:50:23.532 : Open Comm port //./COM7 ; hComm = 988
?
12:50:23.532 : Open Comm port //./COM7 ; hComm = 988
?
12:50:23.547 : I: ConfigurePortA:?
Set Comm State:
DCB.DCBlength ? ? ? 28
DCB.Baudrate ? ? ? ?4800
DCB.ByteSize ? ? ? ?8
DCB.Parity ? ? ? ? ?0
DCB.StopBits ? ? ? ?0
DCB.Binary ? ? ? ? ?1
DCB.fDtrControl ? ? 1
DCB.fRtsControl ? ? 1
DCB.fDsrSensitivity 0
DCB.fParity ? ? ? ? 0
DCB.fOutX ? ? ? ? ? 0
DCB.fInX ? ? ? ? ? ?0
DCB.fNull ? ? ? ? ? 0
DCB.XonChar ? ? ? ? 17
DCB.XoffChar ? ? ? ?19
DCB.fAbortOnError ? 0
DCB.fOutxCtsFlow ? ?0
DCB.fOutxDsrFlow ? ?0
?
?
12:50:23.547 :?
Set Comm State:
DCB.DCBlength ? ? ? 28
DCB.Baudrate ? ? ? ?4800
DCB.ByteSize ? ? ? ?8
DCB.Parity ? ? ? ? ?0
DCB.StopBits ? ? ? ?0
DCB.Binary ? ? ? ? ?1
DCB.fDtrControl ? ? 1
DCB.fRtsControl ? ? 1
DCB.fDsrSensitivity 0
DCB.fParity ? ? ? ? 0
DCB.fOutX ? ? ? ? ? 0
DCB.fInX ? ? ? ? ? ?0
DCB.fNull ? ? ? ? ? 0
DCB.XonChar ? ? ? ? 17
DCB.XoffChar ? ? ? ?19
DCB.fAbortOnError ? 0
DCB.fOutxCtsFlow ? ?0
DCB.fOutxDsrFlow ? ?0
?
12:50:23.547 : I: SetCommunicationTimeouts:?
============ ? ? COMM TIMEOUTS ? ? ================
Saved Read Interval Timeout............... -1
Saved Read Total Timeout Multiplier....... 0
Saved Read Total Timeout Constant Timeout. 0
Saved Write Total Timeout Constant........ 0
Saved Write Total Timeout Multiplier...... 0
===================================================
Set Read Interval Timeout................. -1
Set Read Total Timeout Multiplier......... -1
Set Read Total Timeout Constant Timeout... 1
Set Write Total Timeout Constant.......... 0
Set Write Total Timeout Multiplier........ 0
===================================================
?
12:50:23.547 :?
============ ? ? COMM TIMEOUTS ? ? ================
Saved Read Interval Timeout............... -1
Saved Read Total Timeout Multiplier....... 0
Saved Read Total Timeout Constant Timeout. 0
Saved Write Total Timeout Constant........ 0
Saved Write Total Timeout Multiplier...... 0
===================================================
Set Read Interval Timeout................. -1
Set Read Total Timeout Multiplier......... -1
Set Read Total Timeout Constant Timeout... 1
Set Write Total Timeout Constant.......... 0
Set Write Total Timeout Multiplier........ 0
===================================================
12:50:23.563 : D: startXcvrSerial:?
Serial port:
? ? Port ? ? : COM7
? ? Baud ? ? : 4
? ? Stopbits : 2
? ? Retries ?: 2
? ? Timeout ?: 50
? ? Loop ? ? : 500
? ? RTSCTS ? : 1
? ? CATptt ? : 0
? ? RTSptt ? : 0
? ? DTRptt ? : 0
? ? RTS+ ? ? : 0
? ? DTR+ ? ? : 1
?
?
12:50:23.563 : initialize transceiver
12:50:23.563 : selrig->initialize()
12:50:23.563 : init_rig()
12:50:23.579 : selrig->check()
12:50:23.579 : WriteBuffer: ?00 00 00 01 FA
12:50:23.663 : 1: ReadBuffer [69.07 msec] (0):?
12:50:23.663 : E: ReadBuffer: ReadBuffer FAILED [69.07 msec], read 0 bytes
?
12:50:23.663 : 2: ReadBuffer FAILED [69.07 msec], read 0 bytes
12:50:23.679 : FAILED
Join [email protected] to automatically receive all group messages.