开云体育

Hi all, I have this small but confounding problem with fldigi and CW. fldigi has the option to use CAT keying with supported TRX, the FT-991A is one of them. Tests with ICOM TRX show that the macros

That is a report generated by the PortAudio library and is usually caused by an audio device (not necessarily the one used for fldigi) driver that either does not comply with Windows NNN

Same line#? Dave will want to know.

That is what I am using Mike. Saw the same screen on the .20 release. Thanks for reply hope your doing well. 73 Morris WA4MIT

Try the latest alpha and see if it works OK. http://www.w1hkj.com/alpha/fldigi/ Mike W9MDB

New user to FLdigi and I get this every time I open fldigi. I can click ignore and things seem to work normally but since I am new not sure if it is affecting anything or not. Is there a solution to

UPDATE with John`s help I got fldigi working using hamlib so connecting to radio works great now connects up right away. Thanks for your assistance John & Cliff 73 Morris WA4MIT

After installing Fldigi on a Windows 11 PC, I found that I was unable to select sound card settings in the setup dialog.? I kept getting the "Port I/O Not Available" message regardless of the

HI I just downloaded the latest version of FLDigi. When I execute the setup m screen flashes with the FLDigi screen showing the settings on top and the waterfalls on the bottom. It only last for a

Morris, I think John was referring that using hamlib as rigcontrol within fldigi works in place of flrig. You won’t get all the nice GUI of flrig though. 73, Cliff, AE5ZA

Hi John I looked into using hamlib but it does not seem to have a graphical interface and I do not know anything about setting it up. I am going to be out of pocket over weekend maybe next week we can

Morris, I have a 1000MP and use Hamlib, works great.? Fldigi follows the freq on the rig, can change freq on rig from from Fldigi and QSY button works. John KC3FL

Ok, well you’ll have to hope someone that has the same rig comes up with some help for you. 73, Cliff, AE5ZA

Cliff I do see poling and my ports are all good in windows. *I NEVER HAVE TROUBLE CONNECTING TO HRD I have used several methods of connecting to this radio without any difficulties. * 73 Morris

You need to have the rig on before running flrig. Flrig looks for the rig on startup so it it’s not there it can’t connect to it and normally will give an error message. It doesn’t make sense to

This morning it will not connect and in the port select window it only shows ports 1 thru 3 not 4 and 5. I did get it connected by opening flrig then turn radio on.? I am seeing poling (cat) light

Hmmm… VERY strange. I take it you made these changes from flrig and they were reflected on the rig, correct? Have you tried to change the freq from flrig? Do you have polling set on in

Hi Cliff the setting are correct. When flrig does connect this is what is shown when rig VFO A (main) tuned to 21.285 15M phone band. VFO B is tuned to 10.136mhz Been trying several times today this

Morris, I don’t know the proper settings for the FT1000MP, but you say you have rig control. How do you know that if you can’t control the frequency? Flrig should read/set the frequency as well

Hi All, I uploaded an updated .xml file for the FTDX10 to the files section for use with RigCat. I made changes to the width control section. I was using the FTDX101D version of the xml but the