You need to have the rig on before running flrig. Flrig looks for the rig on startup so it it’s not there it can’t connect to it and normally will give an error message. It doesn’t make sense to me that you say you connected by turning on the rig after starting flrig. Flrig doesn’t keep trying to connect after failing on startup. You have to “update” then select then Init to try to connect. You should be able to click on the “Update” button in the config to see the available ports. If the port isn’t there then somehow Windows isn’t recognizing the serial port.?
I doubt there is a bad command for reading the frequency for your rig as I would expect we would have heard about it a long time ago, Your rig I’m sure is used by a number of folks.
Please answer my questions from my last email.
toggle quoted message
Show quoted text
On Oct 14, 2021, at 07:48, Morris WA4MIT via <
wa4mit@...> wrote:
This morning it will not connect and in the port select window it only shows ports 1 thru 3 not 4 and 5. I did get it connected by opening flrig then turn radio on.? I am seeing poling (cat) light flashing on the radio. I can change the filters also.? Flrig will not change radio freq from this screen. If I change radio freq flrig changes but not correct freq showing.?It seems to me that the command to read this radios freq is wrong within flrig?.?
73 Morris WA4MIT
