Dave Garber VE3WEJ / VE3IE
4.2.06 here.
___
Sent from my two-way wrist watch
73 de W3AB/George
On Feb 13, 2025, at 14:08, "William Schrader via " < gmail.com@ target=_blank>wtschrader=@> wrote:
Can you guys include the actual?version number you are referring to? "LAtest" or "Previous" or "beta" dont help much
tnx
73
Bill K2TNO
I use Win 11 and FLdigi works, but I have to use an older version. The newest version will not work. Others have reported similar results.
--
Fred
K2DFC
|
4.2.06 here.
___
Sent from my two-way wrist watch
73 de W3AB/George
Can you guys include the actual?version number you are referring to? "LAtest" or "Previous" or "beta" dont help much
tnx
73
Bill K2TNO
I use Win 11 and FLdigi works, but I have to use an older version. The newest version will not work. Others have reported similar results.
--
Fred
K2DFC
|
Can you guys include the actual?version number you are referring to? "LAtest" or "Previous" or "beta" dont help much tnx 73 Bill K2TNO
I use Win 11 and FLdigi works, but I have to use an older version. The newest version will not work. Others have reported similar results.
--
Fred
K2DFC
|
Thank for
the reply Dave I will give that a try. Been working on this
issue off and on today with no luck so far.
Dave
On 2/12/2025 6:56 PM, Dave Garber via
groups.io wrote:
TX should be set to vox I belive.?? Ptt is done by
signslink. Is light on SL coming on
sent by ve3wej on samsung
s21+
Need a little help setting up my Xiegu G90 for PSK. I
tried FLRIG to key the radio but no transmit. I am using a
SignaLink USB. Rig control is COM 16 and TX is COM 4.
Any help would be appreciated.
Thanks.
--
73's de NU4N
--
73's de NU4N
-- 73'S DAVE NU4N
|
Hi George,
Good news, thanks for sharing it.
Now I'll leave you with your knowlegable ham colleagues for this remaining topic, since I'm not at all familiar with rigs and their control, being an SWL...
Good luck, I hope you'll find the right way to get it to work before long!
73s Tobias
.-.-.
Am Donnerstag, 13. Februar 2025 um 22:02:31 MEZ hat GEO BADGER via groups.io <w3ab@...> Folgendes geschrieben:
That worked, kinda. Now back to the original issue with the latest ver. In CW mode, the rig goes into TX.
___
Sent from my two-way wrist watch
73 de W3AB/George
On Feb 13, 2025, at 08:40, "T? via " < yahoo.de@groups.io target=_blank> [email protected]> wrote:
Hello Geo,
Sometimes it's a matter of the config files which may over time start making issues, when updating or moving installations around.
I suggest as a last resort to make an entirely fresh special install of the latest stable ver4.2.06 as follows:
On your hard disk, create a folder with write privileges (NOT in Windows governed folders like 'C:\Programs' etc.!!!) and call it exactly this (it may reside in a suitable sub-directory of your choice, though):
FL_APPS
Use underscore, not Space in the folder name!
Install FLdigi therein and follow the instructions given by the installer.
Then run FLdigi from this FL_APPS folder and set your devices and preferences as necessary for trying it out. Note that this will/should be independent from any other FLdigi installation onthis PC, not taking into account your previous user settings. If this works, you may adapt the necessary features further to fit your needs. Note that all personal settings are now stored in an fldigi.files sub-folder within the installation folder you have created above.
Maybe this provides a way to get going again. Needless to say that you must suitably set or reply to Windows access restrictions in the process, in order to not be blocked from doing what you intend to do.
Good Luck!
73s Tobias
.-.-. Am Donnerstag, 13. Februar 2025 um 17:17:22 MEZ hat GEO BADGER via groups.io <w3ab@...> Folgendes geschrieben:
Win10 new ver would put my IC-7610 into TX upon executing. I deleted it, went to the old ver, couldn't TX. Now neither ver will execute after deleting, rebooting, reloading many times
___
Sent from my two-way wrist watch
73 de W3AB/George
|
That worked, kinda. Now back to the original issue with the latest ver. In CW mode, the rig goes into TX.
___
Sent from my two-way wrist watch
73 de W3AB/George
Hello Geo,
Sometimes it's a matter of the config files which may over time start making issues, when updating or moving installations around.
I suggest as a last resort to make an entirely fresh special install of the latest stable ver4.2.06 as follows:
On your hard disk, create a folder with write privileges (NOT in Windows governed folders like 'C:\Programs' etc.!!!) and call it exactly this (it may reside in a suitable sub-directory of your choice, though):
FL_APPS
Use underscore, not Space in the folder name!
Install FLdigi therein and follow the instructions given by the installer.
Then run FLdigi from this FL_APPS folder and set your devices and preferences as necessary for trying it out. Note that this will/should be independent from any other FLdigi installation onthis PC, not taking into account your previous user settings. If this works, you may adapt the necessary features further to fit your needs. Note that all personal settings are now stored in an fldigi.files sub-folder within the installation folder you have created above.
Maybe this provides a way to get going again. Needless to say that you must suitably set or reply to Windows access restrictions in the process, in order to not be blocked from doing what you intend to do.
Good Luck!
73s Tobias
.-.-.
Am Donnerstag, 13. Februar 2025 um 17:17:22 MEZ hat GEO BADGER via groups.io <w3ab@...> Folgendes geschrieben:
Win10 new ver would put my IC-7610 into TX upon executing. I deleted it, went to the old ver, couldn't TX. Now neither ver will execute after deleting, rebooting, reloading many times
___
Sent from my two-way wrist watch
73 de W3AB/George
|
Thanks Tobias. That is what is what I suspected. Your work-around is interesting and I'll try it and report back.
___
Sent from my two-way wrist watch
73 de W3AB/George
Hello Geo,
Sometimes it's a matter of the config files which may over time start making issues, when updating or moving installations around.
I suggest as a last resort to make an entirely fresh special install of the latest stable ver4.2.06 as follows:
On your hard disk, create a folder with write privileges (NOT in Windows governed folders like 'C:\Programs' etc.!!!) and call it exactly this (it may reside in a suitable sub-directory of your choice, though):
FL_APPS
Use underscore, not Space in the folder name!
Install FLdigi therein and follow the instructions given by the installer.
Then run FLdigi from this FL_APPS folder and set your devices and preferences as necessary for trying it out. Note that this will/should be independent from any other FLdigi installation onthis PC, not taking into account your previous user settings. If this works, you may adapt the necessary features further to fit your needs. Note that all personal settings are now stored in an fldigi.files sub-folder within the installation folder you have created above.
Maybe this provides a way to get going again. Needless to say that you must suitably set or reply to Windows access restrictions in the process, in order to not be blocked from doing what you intend to do.
Good Luck!
73s Tobias
.-.-.
Am Donnerstag, 13. Februar 2025 um 17:17:22 MEZ hat GEO BADGER via groups.io <w3ab@...> Folgendes geschrieben:
Win10 new ver would put my IC-7610 into TX upon executing. I deleted it, went to the old ver, couldn't TX. Now neither ver will execute after deleting, rebooting, reloading many times
___
Sent from my two-way wrist watch
73 de W3AB/George
|
I have installed in the FL_APPS folder, and it works except if you are using FlDigi with Slicemaster ( I found a work around)? I also had flrig installed in there.
how are you keying the rig?? are you using flrig, hamlib, catlib???
Dave Garber VE3WEJ / VE3IE
Hello Geo,
Sometimes it's a matter of the config files which may over time start making issues, when updating or moving installations around.
I suggest as a last resort to make an entirely fresh special install of the latest stable ver4.2.06 as follows:
On your hard disk, create a folder with write privileges (NOT in Windows governed folders like 'C:\Programs' etc.!!!) and call it exactly this (it may reside in a suitable sub-directory of your choice, though):
FL_APPS
Use underscore, not Space in the folder name!
Install FLdigi therein and follow the instructions given by the installer.
Then run FLdigi from this FL_APPS folder and set your devices and preferences as necessary for trying it out. Note that this will/should be independent from any other FLdigi installation onthis PC, not taking into account your previous user settings. If this works, you may adapt the necessary features further to fit your needs. Note that all personal settings are now stored in an fldigi.files sub-folder within the installation folder you have created above.
Maybe this provides a way to get going again. Needless to say that you must suitably set or reply to Windows access restrictions in the process, in order to not be blocked from doing what you intend to do.
Good Luck!
73s Tobias
.-.-. Am Donnerstag, 13. Februar 2025 um 17:17:22 MEZ hat GEO BADGER via <w3ab= [email protected]> Folgendes geschrieben:
Win10 new ver would put my IC-7610 into TX upon executing. I deleted it, went to the old ver, couldn't TX. Now neither ver will execute after deleting, rebooting, reloading many times
___
Sent from my two-way wrist watch
73 de W3AB/George On Feb 13, 2025, at 05:31, "Fred K2DFC via " < yahoo.com@ target=_blank>k2dfc=@> wrote: I use Win 11 and FLdigi works, but I have to use an older version. The newest version will not work. Others have reported similar results.
|
Hello Geo,
Sometimes it's a matter of the config files which may over time start making issues, when updating or moving installations around.
I suggest as a last resort to make an entirely fresh special install of the latest stable ver4.2.06 as follows:
On your hard disk, create a folder with write privileges (NOT in Windows governed folders like 'C:\Programs' etc.!!!) and call it exactly this (it may reside in a suitable sub-directory of your choice, though):
FL_APPS
Use underscore, not Space in the folder name!
Install FLdigi therein and follow the instructions given by the installer.
Then run FLdigi from this FL_APPS folder and set your devices and preferences as necessary for trying it out. Note that this will/should be independent from any other FLdigi installation onthis PC, not taking into account your previous user settings. If this works, you may adapt the necessary features further to fit your needs. Note that all personal settings are now stored in an fldigi.files sub-folder within the installation folder you have created above.
Maybe this provides a way to get going again. Needless to say that you must suitably set or reply to Windows access restrictions in the process, in order to not be blocked from doing what you intend to do.
Good Luck!
73s Tobias
.-.-. Am Donnerstag, 13. Februar 2025 um 17:17:22 MEZ hat GEO BADGER via groups.io <w3ab@...> Folgendes geschrieben:
Win10 new ver would put my IC-7610 into TX upon executing. I deleted it, went to the old ver, couldn't TX. Now neither ver will execute after deleting, rebooting, reloading many times
___
Sent from my two-way wrist watch
73 de W3AB/George
I use Win 11 and FLdigi works, but I have to use an older version. The newest version will not work. Others have reported similar results.
|
Hello Karl,
If I'm not mistaken there's a simple way, please look at the attached screenshot.
Unchecking items there, the topmost is relevant for your question, allows global settings instead of (possibly) per mode and even band selections.
Hope this will work for you.
73s SWL Tobias
.-.-.
P.S. My log says I already heard you in FT8 before, e.g. working W7TEC on 10 m Jan 10 at 1650z, SNR -11 dB, stating 'K0CIE EL86'. Your rig certainly works well, I only use a 50 cm in-house home-brew MagLoop for reception here in Bavaria at some 8000 km from the 'Land of FLA' ;-) Am Donnerstag, 13. Februar 2025 um 14:06:00 MEZ hat K0CIE <karl@...> Folgendes geschrieben:
Is there a way to set the Fldigi attenuator to a fixed setting (i.e. zero) all modes all bands?? Trivial issue, but I would prefer to control audio drive via radio and not have to check/readjust Fldigi attenuator control. -- Karl
K0CIE
|
Win10 new ver would put my IC-7610 into TX upon executing. I deleted it, went to the old ver, couldn't TX. Now neither ver will execute after deleting, rebooting, reloading many times
___
Sent from my two-way wrist watch
73 de W3AB/George
I use Win 11 and FLdigi works, but I have to use an older version. The newest version will not work. Others have reported similar results.
|
I am running fldigi on w11??
What does not work?? I think I missed the problem
sent by ve3wej on samsung s21+
I use Win 11 and FLdigi works, but I have to use an older version. The newest version will not work. Others have reported similar results.
--
Fred
K2DFC
|
I use Win 11 and FLdigi works, but I have to use an older version. The newest version will not work. Others have reported similar results.
--
Fred
K2DFC
|
Is there a way to set the Fldigi attenuator to a fixed setting (i.e. zero) all modes all bands?? Trivial issue, but I would prefer to control audio drive via radio and not have to check/readjust Fldigi attenuator control.
--
Karl
K0CIE
|
TX should be set to vox I belive.?? Ptt is done by signslink. Is light on SL coming on
sent by ve3wej on samsung s21+
Need a little help setting up my Xiegu G90 for PSK. I tried FLRIG to key the radio but no transmit. I am using a SignaLink USB. Rig control is COM 16 and TX is COM 4.
Any help would be appreciated.
Thanks.
--
73's de NU4N
|
I to have a problem with all versions of fldigi now.
Wi10 and now the different versions will install but not load. They used to RX but wouldn't TX. I would delete them and reinstall. Now, no joy at all.
___
Sent from my two-way wrist watch
73 de W3AB/George
Dear radio amateurs,
I have a new laptop the Dell 16 5645 with Windows 11 pro.My old laptop is Dell e5470 with Windows 10 pro.
I used Fldigi version 2024 and it worked very well on my Windows 10pro with my FRG 7 receiver and the sound card in the laptop.
Now with the new laptop (Windows 11) what I installed, the old and newest version of Fldigi it does not work any longer.
I tried it many times on more days.
I do not know what the problem is, and maybe someone of you can help me to solve that problem.
I will thank you very much if you can help me with the problem.
Kind Regards
Herman PD1HTI
The Netherlands, in the vicinity of the Airport Schiphol.
My English niveau is what a leard a very long time at school, sorry for that
|
Need a little help setting up my Xiegu G90 for PSK. I tried FLRIG to key the radio but no transmit. I am using a SignaLink USB. Rig control is COM 16 and TX is COM 4.
Any help would be appreciated.
Thanks.
--
73's de NU4N
|
Re: Use of a MacBook pro to run FLDIGI what is the oldest operating system that works
Good question, have not kept up on that issue. However, there is a good chance that if you use a recent compiler on the PPC version of MacOS it will run on it. Not to say this helps you out thou. Food for thought.
Robert
|
Dear radio amateurs,
I have a new laptop the Dell 16 5645 with Windows 11 pro.My old laptop is Dell e5470 with Windows 10 pro.
I used Fldigi version 2024 and it worked very well on my Windows 10pro with my FRG 7 receiver and the sound card in the laptop.
Now with the new laptop (Windows 11) what I installed, the old and newest version of Fldigi it does not work any longer.
I tried it many times on more days.
I do not know what the problem is, and maybe someone of you can help me to solve that problem.
I will thank you very much if you can help me with the problem.
Kind Regards
Herman PD1HTI
The Netherlands, in the vicinity of the Airport Schiphol.
My English niveau is what a leard a very long time at school, sorry for that
|
Use of a MacBook pro to run FLDIGI what is the oldest operating system that works
I own an old MacBook pro -a 2012 model to be exact. What is the oldest version of the operating system that the current version of FLDI/FlRIG will work with? Thanks in advance for the answer.
|
GEO BADGER
David Tucker