开云体育

Hello Dave. I transmit in ssb-rtty only a tone and the power comes out. in data-ssb mode it transmits but no power. the station is connected in usb, it uses a separate port for the cat and the

you said you were using usb mode only, but if you can change the radio to data mode, it may tx your rtty Dave Garber VE3WEJ / VE3IE gmail.com@groups.io> wrote:

Bonjour Chris, Honnêtement, suite à votre courriel, il ne me semble pas très claire comment vous contr?lez votre radio. Si c'est à bases de VOX (sans FLrig etc.), il se peut qu'il y a un truc

I don't understand what you're asking me. Can you be more specific? F5ind Chris

What if you are in usb data mode. sent by ve3wej on samsung s21+ <jc-barbera@...> wrote:

hello everyone. setup: ft991a in usb. window 10. there is no rtty modulation. i searched here, in the previous messages, i browsed a lot of internet pages, also the software help. i managed to decode,

To start, should be no stop bits. BTW, You can't run multiple CAT programs simultaneously should you be trying to. ?___ Sent from my two-way wrist watch 73 de W3AB/George ?

Hope somebody can help me with specific settings for me to get FLRIG working with my DigiRig Mobile and IC-7000 transceiver. Laptop is a W10 Netbook, and WSJT-X works fine. Trying to get FLRIG working

Good to hear that everything is fine now Karl. 73 Haris SV1GRB

I'm using the same settings that always work with WSJT. 4800 baud, 8N2. I had to change the write delay on the menu to the right in transceiver setup dialog to get it to work with 1.4.7.46, but 2.0.05

Harris Of course it wasn't checked. I had looked in the logging menu several times looking for something like that, and after seeing all the logging program options there I had assumed "QSO logging"

Sorry. Baud rate sent by ve3wej on samsung s21+

What band rate are you using to connect?? What is the max for the 1000mp. Maybe try lowering to 4800 or 9600, and see if it helps sent by ve3wej on samsung s21+ gmail.com@groups.io> wrote:

Look in the commands list for the function keys. There are some that say stuff like <CLEAR> or similar . Add that in the function that says <LOG> kaukis.com@groups.io> wrote:

You should check Configure -> Config Dialog -> QSO Logging and make sure that "Clear on save" is checked. 73 Haris SV1GRB

Never heard on the question of the entry fields not clearing when logging the contact.? Any help out there on what setting could be messed up?? -- Karl K0CIE

Nobody ever got an answer here did they? I had to reinstall mine (FLRig 1.4.7.46) from scratch and almost didn't get it working, I had to change the write time above the Init button to get it to

Hi Robert, I have been occasionally experimenting with using the KISS interface this way (on HF). Pinpoint APRS >> fldigi KISS in THOR - that is stable and works well (until the shut down "bug"). I

Hi Dave, Thanks, I have done that and still have the problem, usually with the first instance invoked, sometimes the second and third. I'll try other combos of up and down if you want. I have tried

Jack, What do you mean by "KISS" protocol, the one used by TNC's? I do know that the KISS interface in FLDIGI has some issues. The only one have been able to verify is that KISS interface doesn't