开云体育

Avec plaisir.? merci a vous? ? 73?? ? De : "Dave MARS Maples via groups.io" A : [email protected] Envoyé: samedi 23 Novembre 2024 14:02 Objet : Re: [winfldigi] FLDIGI arret ? Tout : Le

All: Olirobin's message is translated as follows: I use the FLDIGI software which has been very good for a while under win 10 64 bits, to decode fax images in HF and the software stops completely

Bonjour Olirobin, Non, ce n'est pas du tout normal ou même prévu. Je l'ai aussi utilisé pas mal pour des images FAX (Windows 7 et Windiws 10) et je n'ai pas du tout eu un tel problème. FLdigi

j’utilise le logiciel FLDIGI? ?qui ai très bon? ?depuis un temps? sous win 10 64 bits ,? pour décoder des images fax? en HF? et? le logiciel au bout de deux heures il s'arrête?

That is what I sent, was a link to CHiRP Next. I didnt send the daily build link though, I dont believe it. Once installed however, it will do a self check and request the update anyways. Sincerely,

There is a chirp next version now: Index of /chirp_next/next-20241122 ( https://archive.chirpmyradio.com/chirp_next/next-20241122/ ) 73

Hey Tom, For many years I was using the "headphones-to-microphone" method to get audio from my PC into my rig. It was noisy, but it worked. But I did notice the same behavior that you are seeing --

While working with a friend to get him setup on FLDigi and n3fjp for the upcoming ARRL rtty roundup in Jan 2025, we were sending each other some practice QSOs. When I sent him my exchange with TN as

http://www.w1hkj.com/alpha/fldigi/ * fldigi-4.2.06.09.tar.gz <http://www.w1hkj.com/alpha/fldigi/fldigi-4.2.06.09.tar.gz> * fldigi-4.2.06.09_LI.dmg

My mistake. No I don't think it does. So dialing up so audio is do.ewhat centre of audio band is best sent by ve3wej on samsung s21+ [email protected]> wrote:

I am not familiar with this HF SSB Yaesu rig but check this way. Do a FLDIGI TUNE (that’s a steady sine wave) on 500 Hz, then 1000 Hz, then 1500 Hz and stop at 2000 Hz, and report to us the power

I am the net manager of two NBEMS nets, one on 80m (PaNBEMS) and one on 40m (MidAtlantic NBEMS). Both nets meet Sunday mornings: PA at 7:30 AM Eastern and MidAtl at 10 AM Conditions are usually stable

Does FLDigi have 'fake it' 73 vk4tux

True, This is some of the reason wsjtx uses rig split or fake it. If you want to keep audio constant vary the vfo rather than the program pan point (audio freq). 73 vk4tux

depending on the mac version, you may need to use the older version. not sure, but here http://www.w1hkj.com/files/archives/OS-X/ Dave Garber VE3WEJ / VE3IE [email protected]> wrote:

check to see if fake it is turned on Dave Garber VE3WEJ / VE3IE [email protected]> wrote:

U-10 ( )Function: Selection of Enhanced Tuning ScalechoicesAvailable Values: / !/ " / #?Default: !The Enhanced Tuning Scale, located immediatelyabove the VFO-A frequency display, may be used

It sounds to me like your radio audio circuits do not have a flat response. For best function, the radio should reproduce audio levels equally across the spectrum, not suppress or enhance different

Hi there. When I operate digital modes in FLDigi using my Signalink USB, why does the audio level change when frequency is changed? I'll operate, say, PSK31 on my Yaesu FT-920 at the lower end of the

All: I am looking for any information on the minimum required SNR for different types of THOR. Has anyone actually run tests to investigate this? Thanks, Dave Maples