开云体育

Please explain exactly what you are trying to do....there's likely a better solution. Splitting a COM port like that is prone to failure. Mike W9MDB

Yes Mike, I am using Splitter for the Device type. DE Bruce VK2RT

How are you using VSPE?? You trying to split the port? Mike W9MDB

Anyone successfully using the latest FLrig with VSPE? I am stuck on FLrig Ver 1.4.7, latest version fails when using it with VSPE. DE Bruce VK2RT

I will reply in detail later today Eric

I have gotten the SWR meter working and it has a reasonably-accurate scaling with a lookup table based on the rig scaling vs the scaling of the meter in flrig. Here's the code for the get_swr function

Ya! That did it. Thanks!Sent via the Samsung Galaxy S8+, an AT&T 5G Evolution capable smartphone

Thanks Robert!? Preciate awl yawl's work. --- W4MRP

If you link fldigi correctly to log4om fldigi contact will appear in lig4om so you can see the b4. Before you try ho work again sent by ve3wej on samsung s21+ [email protected]> wrote:

Version 2.2.12.04 and 2.2.13.0x (not published, and the only difference is in OPT.M4 file) are slated to become 2.2.14 once Dave has the time to publish one of these 2 Alpha versions. I don't have a

I have flrig running rig control for my Tentec Jupiter.? Log4omV2 reads the rig as well as Fldigi and WSJT-X. When you select a call to work in WSJT-X the Log4omV2 immediately looks it up and shows

Are FLAMP alpha releases stable enough for use?? Does anyone know where the 2.2.12.0 official release is?? The most recent in the archives is 2.2.09 which doesn't include relay files.? 2.2.13 has

@Philip Rose and @Cliff? Thanks guys. Got the meter(s) turned off. I must have been goofing around with settings at some point and exited with meters showing. All better now. Looking forward to

Hamlib has this for the 590S/SG -- so it's non-linear....never heard any complaints about accuracy.... ? ? ? ?static cal_table_t power_meter =? ? ? ? {? ? ? ? ? ? 7, { { 0, 0}, { 3, 5},

Hi David, I am not entirely sure what they should be. I would have expected a *=100 followed by a /=70 for the 890 since it has 70 dots for 100% meter deflection. Similarly a *=100 followed by a /=30

Eric, Post the meter conversions and I will code the 590SG backend. David

To add to this, the scaling factors will need to be different as well. The TS-890 gives a response between 0000 and 0070 and the 590SG is 0000 to 0030, since it has fewer dots on its meter displays.

It looks like there is code in ts890s.cxx that handles reading ALC and SWR as independent functions. If I have some time tomorrow I may see if I can add that code to the TS-590SG module. The commands

Great.? I'm using 2.2.09 and the relay files arent supported.? So is the alpha version OK?? Any idea where I can get the released 2.2.12.0? Thanks!

Hello Dave, Yes, of course, I am glad to help to the community! 73! de HA3MGA Gabor