Re: fldigi 4.2.06.07 posted at
There is no RsID assignment
for SCAMP modes.
David
On 11/19/24 21:26, Steve K4RVA via
groups.io wrote:
toggle quoted message
Show quoted text
Dave,
?
I installed fldigi-4.2.06.07_setup.exe on Windows 10
tonight (my fldigi.files directory was from version 4.2.05.24)
and I noticed that a few of the colors were changed back to
the default settings, and also that TxID and Video ID were not
working. See below.
?
Earlier today I compiled 4.2.06.07 on Linux Mint 22 and did
not have these same issues with the colors defaulting, but I
did not do a 'make install' I just copied the new binary to
/usr/local/bin manually. I didn't think to check TxID or Video
ID.
?
-----
?
Frequency Display - BG Color and Digit Color were changed
back to the default; Font and Font size were not changed.
?
S-meter - BG Color and Scale Color were changed back to the
default; unsure about Meter Color, I don't think I normally
change that from the default.
?
PWR-Meter - same as S-meter
?
Receive Text - RX bkgnd color and Rx font color were
changed back to the default; Font and Font size were not
changed.
?
Transmit Text - same as Receive Text
?
TxID - SCAMP modes (I tried all six) are not sending TxID
tones when the TxID button is enabled, nor when turning it
on/off via a macro.?
?
? <TXRSID:on><TX>
? CQ CQ CQ de <MYCALL> <MYCALL> <MYCALL> CQ?
? <RX><@TXRSID:off>
?
I verified that all of the SCAMP modes are enabled in the
Config -> IDs -> RsID -> Transmit modes dialog.
?
Video ID - also not working with SCAMP (I tried 2 or 3
modes); all SCAMP modes are enabled in the Video ID Modes
dialog.
?
I verified that TxID and Video ID are working with THOR11
to confirm that I had the settings correct.
?
-----
?
Everything else seemed to carry over from the previous
version, at least the things that I can remember that I
changed from the defaults - other RsID settings, Modem
settings, PSK Reporter, Save Parameters, Sweet Spot,
Operator-Station, Rig Control, Soundcard, UI and Waterfall.
?
I made a copy of fldigi.files before making any config
changes, in case you want to see any files from there.
?
Cheers,
Steve K4RVA
|
Neither flrig nor fldigi will
enumerate a serial port that is already in use.? A port in use
will not be accessible for open or read/write.
David
On 11/24/24 19:11, exponent12 via
groups.io wrote:
toggle quoted message
Show quoted text
Its pretty frustrating because I have removed everything ,
wiped out all files, reinstalled and used the identical
configuration to the admin account. I even tried creating a
vanilla user with absolutely nothing else (no other software)
and same thing. ??I dont have any camera or mics. No error
messages. Nothing in windows logs or device manager. It just
wont work. It displays frequency and waterfall but anything
related to transmit is a no go. I dont think it is an audio
issue because WSJTX works just fine with same setup. The only
unusual thing I ran into is that FLDIGI could not enumerate the
com ports and I had to type in COM4 manually.
|
Its pretty frustrating because I have removed everything , wiped out all files, reinstalled and used the identical configuration to the admin account. I even tried creating a vanilla user with absolutely nothing else (no other software) and same thing. ??I dont have any camera or mics. No error messages. Nothing in windows logs or device manager. It just wont work. It displays frequency and waterfall but anything related to transmit is a no go. I dont think it is an audio issue because WSJTX works just fine with same setup. The only unusual thing I ran into is that FLDIGI could not enumerate the com ports and I had to type in COM4 manually.
|
Re: CW Receive but no transmit
Hi Dave,
?
Thank you for coming back to me. via FT-710 usb connection.?
Ben
|
bonjour j'ai fait un test avec le même environnement sur la même machine mais cette fois en décodant du RTTY toute la journée ( 18 heures) et miracle le logiciel ne s'arrête pas donc CQFD ca viens du logiciel quand il décode des images fax .......
- - - - - -
Bonjour Olirobin,
J'avais déjà posé cette question mais encore une fois:
1. Pendant les 2 heures avant l'arrêt, est-ce que toutes les images sont correctement re?ues et enregistrées (ci-inclus la toute dernière)?
2. Cela se plante en mi-image ou dans quelle phase?
3. Et quand FLdigi s'arrête, est-ce que le logiciel se plante et ne réagit plus (p. ex. plus de mouvement diagramme en cascade), ou est-ce que seulement décoder les images ne marche plus (mais des autres modes fonctionnent)?
4. Quand on termine FLdigi (on force l'arrêt via le Gestionnaire des t?ches de Windows), et le relance ensuite, est-ce que tout fonctionne de nouveau (pour 2 heures supplémentaires)? Ou qu'est-ce qui se passe?
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hello, I made a test using the same configuration and machine, but this time, decoding RTTY all day long (18 h). A miracle: the software doesn't stop, thus it must be the FAX image decoding mode.
- - - - - -
Hello Olirobin,
I had asked this question before, but once more:
1. During the 2 hours before it stops, are all images correctly received and saved (incl. the very last received one)?
2. Does it stop in mid-image or during another phase?
3. When FLdigi stops, is the software completely locked (e.g. no more waterfall updates), or is just the image decoding stopped (and other modes still work)?
4. When FLdigi is stopped (e.g. via the Windows Task Manager), and restarted, does everything work again (for 2 more hours)? Or what happens then?
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
73s
Tobias
.-.-.
P.S.: it seems e-mail had swallowed the English version (I had sent below the French text), apologies! I have now changed the separation characters, hope it works now. Am Sonntag, 24. November 2024 um 19:03:57 MEZ hat olirobin via groups.io <olirobin@...> Folgendes geschrieben:
bonjour j'ai fait un test? avec le même environnement? ?sur la même machine? mais cette fois? ?en décodant du RTTY? toute la journée? ( 18? heures)? ? et miracle le logiciel ne s'arrête pas? donc? CQFD? ca viens du logiciel quand il décode des images fax? ? .......? ?
|
bonjour j'ai fait un test avec le même environnement sur la même machine mais cette fois en décodant du RTTY toute la journée ( 18 heures) et miracle le logiciel ne s'arrête pas donc CQFD ca viens du logiciel quand il décode des images fax .......
- - - - - -
Bonjour Olirobin,
J'avais déjà posé cette question mais encore une fois:
1. Pendant les 2 heures avant l'arrêt, est-ce que toutes les images sont correctement re?ues et enregistrées (ci-inclus la toute dernière)?
2. Cela se plante en mi-image ou dans quelle phase?
3. Et quand FLdigi s'arrête, est-ce que le logiciel se plante et ne réagit plus (p. ex. plus de mouvement diagramme en cascade), ou est-ce que seulement décoder les images ne marche plus (mais des autres modes fonctionnent)?
4. Quand on termine FLdigi (on force l'arrêt via le Gestionnaire des t?ches de Windows), et le relance ensuite, est-ce que tout fonctionne de nouveau (pour 2 heures supplémentaires)? Ou qu'est-ce qui se passe?
==
73s
Tobias
.-.-. Am Sonntag, 24. November 2024 um 19:03:57 MEZ hat olirobin via groups.io <olirobin@...> Folgendes geschrieben:
bonjour j'ai fait un test? avec le même environnement? ?sur la même machine? mais cette fois? ?en décodant du RTTY? toute la journée? ( 18? heures)? ? et miracle le logiciel ne s'arrête pas? donc? CQFD? ca viens du logiciel quand il décode des images fax? ? .......? ?
|
bonjour j'ai fait un test? avec le même environnement? ?sur la même machine? mais cette fois? ?en décodant du RTTY? toute la journée? ( 18? heures)? ? et miracle le logiciel ne s'arrête pas? donc? CQFD? ca viens du logiciel quand il décode des images fax? ? .......? ?
|
W10 and W11 have been increasing their privacy rules for the past few years. So I have the following comments.
1. I never install for supervisor (admin) privileges.
2. I always install for single user, not everyone.
3. (Personally, I never 'install' fldigi. I always use the portable version. Much easier to manage.)
4. It sorta seems that this might be a privacy setting. I always leave mic and camera turned off when I am not specifically using them, and privacy geek that I am, I also leave my camera covered when not in use. But to the point, if fldigi is running, but not accessing the audio stream, then I suspect a privacy setting. Usually fldigi complains if it can't find the audio path, and setting the mic off disables that somehow.
|
Re: CW Receive but no transmit
are you trying to go via a winkey device? or audio or mcw?
Dave Garber VE3WEJ / VE3IE
On Sat, Nov 23, 2024 at 7:40?PM Benjamin Sangster via <vk3tbs= [email protected]> wrote: Hi I can receive CW in Fldigi, but can not transmit.? I have tested using another radio, and while FLdigi does transmit, there is no audio, just a carrier.
?
I've checked my settings and have the correct sound card selected.
?
To make matters harder, I can transmit and receive on Olivia.
?
Any help appreciated!
|
This is rather strange. I have Fldigi working logged in as admin on windows 11. It is version 4.2.06 and an ICOM 7300. Using the same configuration as a standard nonadmin user PTT does not work. If I click on tune nothing happens but if I am logged in as admin tune works fine. I did have a problem during the install as COM4 did not appear on the list but I entered manually and then it worked. I have tried rebooting and restarting the radio but it is 100% reproducible that I can not get it working other than as admin. I was also wondering where does the configuration get stored?
|
Glad to hear it worked smoothly for you!
toggle quoted message
Show quoted text
On Nov 23, 2024, at 8:41?PM, exponent12 via groups.io <exponent12@...> wrote:
? I didnt know I could do that and it worked. As soon as I entered Com4 all was fine. Thank you for the help.
|
I didnt know I could do that and it worked. As soon as I entered Com4 all was fine. Thank you for the help.
|
Manually type in the required com port.? FLDIGI does not seem to detect the available com ports.
I have an ICOM 7300 connected via USB and installed Fldigi 4.2.06 on windows 11. It only finds COM1 which does not exist. My Com port is COM4 and it works fine with other applications (Flrig, WSJTX). It is an Acer laptop and has no other Com ports.? I have rebooted and checked COM port properties, there is nothing unusual. I also checked hidden devices and there is no COM1 port there
|
toggle quoted message
Show quoted text
I have an ICOM 7300 connected via USB and installed Fldigi 4.2.06 on windows 11. It only finds COM1 which does not exist. My Com port is COM4 and it works fine with other applications (Flrig, WSJTX). It is an Acer laptop and has no other Com ports.? I have rebooted and checked COM port properties, there is nothing unusual. I also checked hidden devices and there is no COM1 port there
|
I have an ICOM 7300 connected via USB and installed Fldigi 4.2.06 on windows 11. It only finds COM1 which does not exist. My Com port is COM4 and it works fine with other applications (Flrig, WSJTX). It is an Acer laptop and has no other Com ports.? I have rebooted and checked COM port properties, there is nothing unusual. I also checked hidden devices and there is no COM1 port there
|
CW Receive but no transmit
Hi I can receive CW in Fldigi, but can not transmit.? I have tested using another radio, and while FLdigi does transmit, there is no audio, just a carrier.
?
I've checked my settings and have the correct sound card selected.
?
To make matters harder, I can transmit and receive on Olivia.
?
Any help appreciated!
|
Avec plaisir.? merci a vous? ? 73??
?
De : "Dave MARS Maples via groups.io"
A : [email protected]
Envoyé: samedi 23 Novembre 2024 14:02
Objet : Re: [winfldigi] FLDIGI arret
?
Tout : Le message d’Olirobin se traduit comme suit :
Je ne crois pas que ce soit normal. Quelqu’un d’autre peut-il intervenir ici ? Je me ferai un plaisir de traduire en fran?ais.
Olirobin : Je ne crois pas que ce soit normal. J’ai traduit votre message en anglais et demandé de l’aide à d’autres. Je suis s?r que des gens plus intelligents seront en mesure de vous aider.
Dave WB4FUR
Olirobin : Je ne pense pas que ce soit normal. J'ai traduit votre message en anglais et demandé de l'aide à d'autres personnes. Je suis s?r que des personnes plus intelligentes pourront vous aider.
Dave WB4FUR
?
-----Message original -----De : [email protected] <[email protected]>
Au nom d’olirobin via groups.io
Envoyé : vendredi 22 novembre 2024
12:54 ? : [email protected]
Sujet : [winfldigi] FLDIGI arret
?j’utilise le logiciel FLDIGI?? qui ai très bon?? depuis un temps? sous win 10 64 bits ,? pour décoder des images fax? en HF? et? le logiciel au bout de deux heures il s'arrête?? complètement?? !?? es-que ces normale ?????? dans la version gratuite??? merci pour? des infos sur ce sujet 73 a tous???
?
|
All: Olirobin's message is translated as follows:
I don't believe that's normal.? Can someone else weigh in here?? I will be happy to translate back to French.
Olirobin: I don't believe that is normal.? I have translated your message into English and asked others for assistance.? I am sure smarter people will be able to help you.
Dave WB4FUR
Olirobin : Je ne pense pas que ce soit normal. J'ai traduit votre message en anglais et demandé de l'aide à d'autres personnes. Je suis s?r que des personnes plus intelligentes pourront vous aider.
Dave WB4FUR
toggle quoted message
Show quoted text
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of olirobin via groups.io
Sent: Friday, November 22, 2024 12:54
To: [email protected]
Subject: [winfldigi] FLDIGI arret
?j’utilise le logiciel FLDIGI?? qui ai très bon?? depuis un temps? sous win 10 64 bits ,? pour décoder des images fax? en HF? et? le logiciel au bout de deux heures il s'arrête?? complètement?? !?? es-que ces normale ?????? dans la version gratuite??? merci pour? des infos sur ce sujet 73 a tous???
|
Bonjour Olirobin,
Non, ce n'est pas du tout normal ou même prévu. Je l'ai aussi utilisé pas mal pour des images FAX (Windows 7 et Windiws 10) et je n'ai pas du tout eu un tel problème. FLdigi est gratuit sans aucune option à payer...
Pendant les 2 heures, les images sont bien re?ues et enrégistrées? Et ensuite, ?a se plante sans réagir? Toujours 2 heures avant le problème arrive?
Vous avez bien activé APT et Cont. pour le mode automatique?
厂颈苍肠è谤别尘别苍迟,
Tobias
.-.-. Am Freitag, 22. November 2024 um 21:23:24 MEZ hat olirobin via groups.io <olirobin@...> Folgendes geschrieben:
?j’utilise le logiciel FLDIGI? ?qui ai très bon? ?depuis un temps? sous win 10 64 bits ,? pour décoder des images fax? en HF? et? le logiciel au bout de deux heures il s'arrête? ?complètement? ?!? ?es-que ces normale ?? ? ? dans la version gratuite? ? merci pour? des infos sur ce sujet 73 a tous? ??
|
?j’utilise le logiciel FLDIGI? ?qui ai très bon? ?depuis un temps? sous win 10 64 bits ,? pour décoder des images fax? en HF? et? le logiciel au bout de deux heures il s'arrête? ?complètement? ?!? ?es-que ces normale ?? ? ? dans la version gratuite? ? merci pour? des infos sur ce sujet 73 a tous? ??
|
Dave
Rich NE1EE