Re: Latest FLDIGI seems to freeze after transmit
Yes my fldigi freezes after I transmit
as well.
Winlink is user friendly fldigi is not.
On 9/19/2021 5:14 PM, Stuart Solomon
wrote:
toggle quoted message
Show quoted text
Yes, I am also seeing this error.? Running 4.1.20
|
Icom DTR RTTY keying here yet?
I saw some older notes saying no.
I remember using CAT keying earlier but found out it must have been for CW only.
I just promised to help an Indian ham set up fldigi for the contest in FSK mode with his Icom 7300 and am stuck!
I happily use a winkeyer.
I hate to switch him to the complex N1MM setup.
What options do I have, still using fldigi?
Help appreciated!!!
Going to Google and youTube in the meantime.
--
73, Bo W4GHV since '54
|
I am having trouble use the MAPIT macro for Google Earth.
I am putting the MAPIT macro into my log macro.
Following the MAPIT macro I am inserting <RX> & <CLRTX> but what sows up in the end of the logging screen. the macro will not into rcv and clrtx.
a
--
73 NU4N Dave
|
Re: Fldigi Audio Error "Port Audio Device not available" After Recent Windows 10 Update
Appreciate all the responses. I May have solved a tiny bit of the problem but still working to understand how or why. I see intense W10? learning priority for me. Believe the 'Port Audio Not Available MAY have been started by my selecting an incorrect device. In the Soundcard, Devices, PortAudio drop-down menu for both Capture and Playback if you look far enough there are 3 submenus with apparently identical selections as the 'main'. These are MME devices, Windows DirectSound devices, and Windows WDM-KS devices. Struggling to figure out why my fldigi was not (apparently) connecting to receive audio I think I selected from one of these 3 submenus and shortly thereafter was received the 'Port Audio Not Available' message. I completely uninstalled fldigi reinstalled and solved that problem.? The reason I thought there was no connection was that the waterfall and other signal indications showed a very high signal level with high audio too and nothing I did with the receive audio from the radio (Flex 6400) including turning off the Flex had any effect on fldigi. Stumbling around I discovered as below in Win10 settings. The yellow highlighted device was set at 100%. Lowering this fixed the level issue. No other adjustment in the Flex settings made any difference. I could shut off the DAX move all the level controls even exit the Flex SmartSDR and this was the only control that had effect. Any help understanding the interplay of Win10 devices and applications with both fldigi and SmartSDR is appreciated. I also note that this device/app appears to be permanently 'in Win10' as it's there when the computer if brought up from a cold boot this morning. Thanks again  -- W0MPM John
|
Re: Latest FLDIGI seems to freeze after transmit
Yes, I am also seeing this error.? Running 4.1.20
|
fldigi 4.1.20.14 test version posted
at
Date:?? Tue Sep 14 14:45:00 2021
-0500
??? alpha
????? * development release
??? MAPIT macro
????? * force lat/lon specifier to use '.' and NOT ','
??????? Google maps will not accept the ',' decimal separator
??? Documentation update
????? * add/update documentation for
??????? . Domino-EX Micro
??????? . OFDM modes
??????? . Thor Micro
??????? . Thor 25/50/100
??????? . 8 psk modes
??? Polish translation update
????? * update to pl.po provided by Roman Baginski, SP4JEU
??? Mode Parameters
????? * save squelch settings by mode and reapply when
??????? mode selected: squelch value, squelch button
??????? . setting saved in file squelch_by_mode.prefs located
????????? in the fldigi main files folder.? prefs files are
????????? user editable text format which are read during
????????? program start up.
????? * save and reapply AFC state by mode
????? * save and reapply TX level attenuator by mode
??? config script update
????? * add cmedia ptt parameters to config scripting
??? WinKeyer
????? * Fix disconnect between fldigi and WinKeyer potentiometer
????? * Change WK WPM char/space timing.
??????? . remove dependence on winkeyer echo
??????? . allow user to calibrate to a nominal WPM setting
??? KNWD cat keying
??? synop event reporting
????? * changed default event reporting to VERBOSE to reduce
event
??????? log noise for users not operating SYNOP
??? RsID EOT
????? * Add RsID end-of-transmission code sequence, 263
??????? . separately configurable notify dialog
??? MacOS Lion seg fault
????? * Disallow static instantiation of cMorse class.
??????? . ALWAYS USE cMorse * instantiation.
73, David, W1HKJ
|
Fldigi and Yeasu FT-2980r
I need Fldigi and Flrig settings and a XML file for a Yeasu FT-2980r. What is the correct PTT setting? What is a 2980 default baud rate, other necessary setting for the FT-2980r to use 2 meter FM digital. Setting up to test a few digital modes in our area that voice radio will not cover.
Thanks KE0DHO
|
Re: Yaesu FTdx 3000, FLRIG, AND FLDIGI
Cor,
You might want to try flrig in combination with fldigi.? flrig
fully supports the FTdx3000.
73, David, W1HKJ
On 9/19/21 11:28 AM, cor struyk, PA0GTB
wrote:
toggle quoted message
Show quoted text
To help you
Here is the discription.
73, Cor PA0GTB
--
73 de Cor, PA0GTB
|
Re: Yaesu FTdx 3000, FLRIG, AND FLDIGI
To help you Here is the discription. 73, Cor PA0GTB -- 73 de Cor, PA0GTB
|
Re: Yaesu FTdx 3000, FLRIG, AND FLDIGI
See my setup link for FTDX3000 and Fldigi on my website...? ??
Succes, 73 de Cor, PA0GTB -- 73 de Cor, PA0GTB
|
FLRig connect fails #help #flrig into virtual COM in Win4ICOM
#help
#flrig
Hi all,
??? Again. Thanks all for being here.? I have been using FLDigi, etc for about 1 year.? Can't say exactly when it stopped working, but FLRig will no longer connect into Win4ICOM.? All other software works (DxLab Commander, RMSExoress WinLInk ARDOP, VARA) via Win4ICOM virtual ports.? Some details:
FLRig v1.4.0
Windows10 latest updates
Tried direct to IC7100 and that works.? to virtual COM in Win4ICOM suite using virtual COM0COM.? to virtual COM in VSPE.? In different PC connecting via VSPE HTTP using virtual COMs.
All this used to work.? No longer does.? Baud rate is 19200 in WIn4ICOM and FLRig.
Any ideas?? Thanks.
73s,? Rory W4RJG
|
Re: Fldigi Audio Error "Port Audio Device not available" After Recent Windows 10 Update
Make sure the port is not being used by another application like a logger.
John
KC3FL
|
Re: Fldigi Audio Error "Port Audio Device not available" After Recent Windows 10 Update
Just out of Curiosity
Check to make sure that Windozes didn't turn off the
permission to allow your computer to access the microphone
-- It does that sometimes with an update --
Chris N9JCA
73
toggle quoted message
Show quoted text
On 9/19/21 4:09 AM, N9JCA Chris via groups.io wrote: Does your Rig have USB Connection?
Turn Rig OFF
Dis-Connect USB from Rig
Re boot Computer
Double check you still have the drivers for the Rig
If NOT Reinstall the driver
Turn Computer OFF
Connect USB to Rig
Turn ON Computer
Turn ON Rig
Bring up FLdigi see if you can now see the audio drivers in Portaudio
from drop down list
Chris N9JCA
73
On 9/18/21 11:11 PM, John Brown via groups.io wrote:
Having exact same as John Samuels K2CIB. In fact same picture. Just started using fldigi last Sunday and worked fine. Now can't select PortAudio.
--
W0MPM John
|
Re: Fldigi Audio Error "Port Audio Device not available" After Recent Windows 10 Update
Does your Rig have USB Connection?
Turn Rig OFF
Dis-Connect USB from Rig
Re boot Computer
Double check you still have the drivers for the Rig
If NOT Reinstall the driver
Turn Computer OFF
Connect USB to Rig
Turn ON Computer
Turn ON Rig
Bring up FLdigi see if you can now see the audio drivers in Portaudio
from drop down list
Chris N9JCA
73
toggle quoted message
Show quoted text
On 9/18/21 11:11 PM, John Brown via groups.io wrote: Having exact same as John Samuels K2CIB. In fact same picture. Just started using fldigi last Sunday and worked fine. Now can't select PortAudio.
--
W0MPM John
|
Re: Fldigi Audio Error "Port Audio Device not available" After Recent Windows 10 Update
Having exact same as John Samuels K2CIB. In fact same picture. Just started using fldigi last sunday and worked fine. Now can't select PortAudio.
--
W0MPM John
|
Re: fldigi 4.1.20.11 posted at
I just joined the group and posted about a language selection problem - then I saw this - and after an uninstall and installing the 4.1.20.11 files, I am in business....in English!!!? ?Thanks very much.? I'm very new to FLDGI and look forward to learning from the group
|
Re: Menu Bar is in German
I just downloaded 4.1.20....repeadedly...and I cannot find any config menu items to change the language to English.? My config menu does not look like your screen shots.? There is no General option under UI...or anywhere else.??   ANY help is appreciated.? FLDGI is unuseable in this language. Thank you Kevin - KF0BSQ
|
Yaesu FTdx 3000, FLRIG, AND FLDIGI
I'm trying to set up FLDIGI with my Yaesu FTdx3000 using FLRIG for control.? I had them communicating for 12 glorious seconds, but never again since.
|
at
Date: Sat Sep 18 11:20:00 2021 -0500
alpha
* development release
MAPIT macro
* force lat/lon specifier to use '.' and NOT ','
Google maps will not accept the ',' decimal separator
Documentation update
* add/update documentation for
. Domino-EX Micro
. OFDM modes
. Thor Micro
. Thor 25/50/100
. 8 psk modes
Polish translation update
* update to pl.po provided by Roman Baginski, SP4JEU
Mode/Squelch
* save squelch settings by mode and reapply when
mode selected: squelch value, squelch button
. setting saved in file squelch_by_mode.prefs located
in the fldigi main files folder. prefs files are
user editable text format which are read during
program start up.
config script update
* add cmedia ptt parameters to config scripting
WinKeyer
* Fix disconnect between fldigi and WinKeyer potentiometer
* Change WK WPM char/space timing.
. remove dependence on winkeyer echo
. allow user to calibrate to a nominal WPM setting
KNWD cat keying
synop event reporting
* changed default event reporting to VERBOSE to reduce event
log noise for users not operating SYNOP
RsID EOT
* Add RsID end-of-transmission code sequence, 263
. separately configurable notify dialog
MacOS Lion seg fault
* Disallow static instantiation of cMorse class.
. ALWAYS USE cMorse * instantiation.
Documentation update available at
and on line at
73, David, W1HKJ
|
Thanks for the reply. I did not see that in the macro choices.\
73's Dave NU4N
On 9/18/2021 8:19 AM, Dave wrote:
toggle quoted message
Show quoted text
The code logic:
static void MAPIT(int how)
{
??? float lat = 0, lon = 0;
??? std::string sCALL = inpCall->value();
??? std::string sLOC = inpLoc->value();
??? std::string url = ;
// LOOKUP BY ADDRESS REQUIRES ADDRESS, STATE & COUNTRY (or
national equivalent)
??? if (how > 1 && !lookup_country.empty()) {
??? ???
url.append(lookup_addr1).append(",").append(lookup_addr2).append(",");
??? ???
url.append(lookup_state).append(",").append(lookup_country);
??? } else {
// LOOKUP BY LAT/LONG
??? ??? if (how > 0 && (!lookup_latd.empty() &&
!lookup_lond.empty())) {
??? ??? ??? url.append(lookup_latd).append(",");
??? ??? ??? url.append(lookup_lond);
??? ??? } else {
// LOOKUP BY LOCATOR CONVERTS THE 6 CHARACTER LOCATOR TO LAT/LON
??? ??? ??? if (sLOC.empty()) return;
??? ??? ??? if (sLOC.length() < 4) return;
??? ??? ??? if (sLOC.length() < 6) sLOC.append("aa");
??? ??? ??? for (size_t i = 0; i < 6; i++) sLOC[i] =
toupper(sLOC[i]);
??? ??? ??? if (sLOC[0] -'A' > 17 || sLOC[4] - 'A' > 23 ||
??? ??? ??? ??? sLOC[1] -'A' > 17 || sLOC[5] - 'A' > 23 ||
??? ??? ??? ??? !isdigit(sLOC[2]) || !isdigit(sLOC[3])) return;
??? ??? ??? lon =??? -180.0 +
??? ??? ??? (sLOC[0] - 'A') * 20 +
??? ??? ??? (sLOC[2] - '0') * 2 +
??? ??? ??? (sLOC[4] - 'A' + 0.5) / 12;
??? ??? ??? lat = -90.0 +
??? ??? ??? (sLOC[1] - 'A') * 10 +
??? ??? ??? (sLOC[3] - '0') +
??? ??? ??? (sLOC[5] - 'A' + 0.5) / 24;
??? ??? ??? char sdata[20];
??? ??? ??? snprintf(sdata, sizeof(sdata),"%10.6f", lat);
??? ??? ??? url.append(sdata).append(",");
??? ??? ??? snprintf(sdata, sizeof(sdata),"%10.6f", lon);
??? ??? ??? url.append(sdata);
??? ??? }
??? }
??? if (!sCALL.empty()) url.append("(").append(sCALL).append(")");
??? else url.append("(nocall)");
??? url.append("&t=p&z=10");
??? cb_mnuVisitURL(NULL, (void*)url.c_str());
}
static void pMAPIT(std::string &s, size_t &i, size_t
endbracket)
{
??? if (within_exec) {
??? ??? substitute(s, i, endbracket, "");
??? ??? return;
??? }
??? std::string sVal = s.substr(i + 7, endbracket - i - 7);
??? if (sVal.length() > 0) {
??? ??? if (sVal.compare(0,3,"adr") == 0)
??? ??? ??? REQ(MAPIT,2);? // MAP USING ADDRESS
??? ??? else if (sVal.compare(0,6,"latlon") == 0)
??? ??? ??? REQ(MAPIT,1); // MAP USING LATITUDE / LONGITUDE
??? ??? else if (sVal.compare(0,3,"loc") == 0)
??? ??? ??? REQ(MAPIT,0); // MAP USING LOCATOR
??? ??? else
??? ??? ??? REQ(MAPIT,2); // DEFAULT TO ADDRESS
??? } else
??? ??? REQ(MAPIT,2); // <MAP> DEFAULTS TO ADDRESS
??? s.erase(i, s.find('>', i) + 1 - i);
??? expand = false;
}
The lookup will be OK 99.99% of the time using <MAPIT>
73, David, W1HKJ
On 9/18/21 6:16 AM, Dave Tucker Nu4N
wrote:
David I was looking at the mapit macro. Are those lines that
divide adr,lat & loc straight lines up or "/"??
Thanks for the reply.
73's Dave NU4N
On 9/17/2021 7:27 PM, Dave wrote:
Create a "map it"
macro.? See
Executing the macro will open the browser to the current
stations grid locator, or lat/lon.
David
On 9/17/21 6:35 PM, John via
groups.io wrote:
Dave,
You can hit the lookup icon on Fldigi which should bring
up the stations QRZ page if you have that setup.? Click on
the detail tab and then the show map box.? That is the
only way I know how to get the Google map of the station.?
You can click on the box symbol in the upper right corner
for full screen.
John
KC3FL
--
73 NU4N Dave
--
73 NU4N Dave
|
Bo W4GHV
John W0MPM
Dave
Bernard Bade KE0DHO
cor struyk, PA0GTB
Rory Griffin, W4RJG
KevinA-KF0BSQ