开云体育

Setting 991a menu for data. Data-usb ou data-Lsb : usb port or data cinch. Sélect your choice. Jean-Christophe BARB?RA

does the digirig have vox setting like the signalink?? i dont know, if not , then perhaps putting the radio in vox on mode, and ptt via rts? maybe Dave Garber VE3WEJ / VE3IE [email protected]>

Also in FLdigi there is the under the Misc the Autostart. There I can input all the FL Programs to come up when I start FLdigi. Just things we are finding out with this amazing program.

On flrig on the config button under the UI there is the user interface button. I clicket on it to see what it did. On my IC-7100 there is the same interface but when you click any button it goes away.

Thanks, Dave!!

So, when you open FLRIG, you have no user interface? How do you even know it's open then?

I am using Digirig Mobile as my PC-to-Rig interface https://digirig.net/product/digirig-mobile/ RE "perhaps you need to use the vox method", what would that mean from an fldigi configuration

Hi Barry, My name is Randy / n7wwa. I used to participate in the PA nbems digi nets several years ago. At that time, there was a guy out of Pittsburgh that was NCS most of the time. I am in WV at

USB = upper sideband for voice/microphone input DATA-U = upper sideband but using data input instead of microphone -- Charles J. Hargrove - N2NOV NYC-ARECS/RACES Citywide Radio Officer/Skywarn Coord.

On my calendar as well!

Thanks for the reply, Barry! I applied your recommendations and was able to see a perfectly decoded message this morning. I had been told that I MUST keep my mode in USB for everything, but I had

what are you using for sound card interface? perhaps you need to use the vox method, and not cat ptt Dave Garber VE3WEJ / VE3IE [email protected]> wrote:

I'm adding this to my calendar. Fred, KE8WSM

Thank you Dan. Simply an oversight on my part (and the result of changes in my personal life). Sorge Forge has been updated. David [email protected]> wrote:

Hi all, I wanted to check my Windows versions of fldigi, flmsg, flamp, and flrig were current, and found that sourceforge.net and w1hkj.org have different versions of flamp - 2.2.13 on sourceforge,

A few of us in the Philly region are starting a new net: *FLDIGI TRAINING NET* This may be helpful especially for rookies with FLDIGI. Net time: ?1st and 3rd Saturday of each month: ?9:00 AM Eastern

There can be many reasons Fldigi does not “print” with your setup. One rookie error is to be in LSB data mode. ?All modes are USB-D now, even on 80 and 40m where lower sideband is for phone

The Pa NBEMS net extensively tested (a few years ago) the OFDM modes on 80m Sunday mornings 0730 hr. OFDM500 was very frustrating and not very robust unless we had a very strong S/N. The 80m NVIS

Hello, My goal is to set up my FT-99!a to decode CW and send with a straight key. I am running FLDIGI ver. 4.2.05 with FLRIG 2.2.05. Rig control seems to be operating correctly. Right now, I can hear

I am using Fldigi 4.2.06. I have Rig Control set for "Use Hamlib". For the Hamlib "Rig" setting I have "Icom IC-707 (Alpha)" selected. Other then the Hamlib "Device" and "Baud rate" settings, all