开云体育

Hello Rik, For RSID to 'work' as expected, you'll need to set up FLdigi for example as follows (these are just my personal recommendations for everyday use): 1. From the Main Menu, open Configure -

Hello David, Thank you so much - it works very well and I'll repeat my comparative PathSim test asap. Thor-25 Freq. Analysis looks great, see attachment... TNX es 73s Tobias .-.-.

Thanks Barry.? I would appreciate your doing some real world testing with THOR-25.? My bench tests show it to give >99% copy with PathSim/LinSim Mid-Latitude Disturbed simulation. SCAMP is intended

Dave We who use THOR appreciate all of the work you put in to make it better. My experience using THOR22 on HF NBEMS nets (PaNBEMS, MidAtlantic NBEMS) on 80m and 40m in the early morning hours is that

Tobias, Please test both MFSK and THOR (especially new modem type THOR-25) added to 06.12 test version at http://www.w1hkj.com/alpha/fldigi/ commit db6798876a79e5087a69017c2a6c5c32712c05b6 Author:

I am running 4.2.06 on Windows 10. The RSID dialog does not pop up. I have the RxID clicked and it is green.

Mike, Dittos on what Barry said. I have a few other things to add from experience. Can't emphasize enough on the squelch. It can be a killer. At the bottom of the screen, Make sure your CW speed is

A different question My FLDIGI (rig is Icom 7610) copies CW almost 100% from 10wpm to 30 wpm, if sent with appropriate timing. Hand sent CW on a straight key is awful The only thing that I can

Hi there Mike some thoughts based on my self learning, on how to use FL-DIGI with N1MM for contesting. 1- Some signals come in so strong and distorted ( linear amplifiers not properly set) that the

Well I did want to participate in at least ONE CW contest this year, and since my actual "ear copy" speed's well below my hand-send speed (as is with most people - hand send= ~6-9 WPM; ear copy = <4

Thank you so much. Will give this a go tonight. Appreciate it mate.

Hello David, I found the respective information mentioned in my last e-mail, that the bandwidth is restricted to 500 Hz: it's in the IARU Region 1 Bandplan (attached) for the 80 m DigiMode frequencies

Hello David, Thank you for the impressive THOR32 example! Unfortunately, after considering various alternatives, we have intentionally selected the MFSK32 mode, because it offers high troughput (and

Hi Ben, I've successfully used Flrig + Fldigi for CW with my Kenwood TS-570 two different ways. The first is with Fldigi Op Mode = CW and a rig mode = CW. This produces an actual CW signal from the

Tobias, I played back the ogg file and observed the difficulty in early synchronization when the signals are so widely dispersed in transmit frequency. +/- 14 Hertz is not a large variation for CW or

Hello David, Thanks a lot for the FLdigi update with AFC lowpass filter! After downloading FLdigi ver4.2.06.11, I have tried to evaluate the difference between both limit AFC settings: 2 and 200. I

Tobias, Please download and testt 4.2.06.11 posted at http://www.w1hkj.com/alpha/fldigi/ * fldigi-4.2.06.11.tar.gz <http://www.w1hkj.com/alpha/fldigi/fldigi-4.2.06.11.tar.gz> *

Thanks so much @Adrian Fewster . I am not sure exactly where these setting are though. I must be missing something Is it Configure - Config dialog then somewhere there? appreciate your help

Hello Olivier, A shame that we could not help you find a solution in FLdigi. I don't have an idea what causes the problem, after all that was tried. Thanks for giving it a try anyway and good luck in

?Hello, I have tried several times with different settings and unfortunately nothing is better. FLDIGI continues to stop after two or three hours of decoding fax images. From this observation, I