开云体育

I am having problems doing CW Keying from the FLRIG program. When I go to Keyer | CW Keyer and type a message and press Send/Pause, the transmitter doesn't transmit but the software acts as if though it is (marquees the message that I typed).

?

If I do the same but use the FSK Keyer - it DOES trigger the rig to transmit.. I have the following settings for Xcvr and PTT-Generic:

?

?

Can someone help me figure this out? I am hope that fixing this - will carry over to CW working in FLDIGI as well..

Oh - while I'm at it - can you tell me - when you use FLDIGI to transmit/decode CW with the IC-7300, is your radio set to CW or LSB-D/USB-D ?

Thank you!

Then I will have to set it on radio as Keyer(CW) RTS too, right? I thought FLDIGI used CI-V to control PTT and then sent the tone?

/Anders Georgsson

On Mon, Mar 24, 2025 at 6:59?PM kiyo via <ja9hwd=[email protected]> wrote:

In the first "Xcvr" image, I think you need to check "RTS/CTS".
And when I'm on CW, I set the mode to "CW" on both my rig and the app.

2025年3月25日(火) 3:25 Anders Georgsson via <anders.georgsson=[email protected]>:

I am having problems doing CW Keying from the FLRIG program. When I go to Keyer | CW Keyer and type a message and press Send/Pause, the transmitter doesn't transmit but the software acts as if though it is (marquees the message that I typed).

?

If I do the same but use the FSK Keyer - it DOES trigger the rig to transmit.. I have the following settings for Xcvr and PTT-Generic:

?

?

Can someone help me figure this out? I am hope that fixing this - will carry over to CW working in FLDIGI as well..

Oh - while I'm at it - can you tell me - when you use FLDIGI to transmit/decode CW with the IC-7300, is your radio set to CW or LSB-D/USB-D ?

Thank you!