|
Sorry I didn't mention I was looking for a solid state replacement, my dist still works. First street offers a solid state 6 volt replace meant for Ford model T's...
On Friday, February 28, 2025 at 11:11:54 PM MST, Dan Mulholland via groups.io <mulhollanddr@...> wrote:
Here is the new distributor-I have the stock 6 volt setup, so points are still the thing.
And here is a rebuilding service-
I haven't talked to the rebuilder yet.
From: [email protected] <[email protected]> on behalf of jeepeers85213 via groups.io <bilwilm@...>
Sent: Friday, February 28, 2025 6:44 PM To: [email protected] <[email protected]> Subject: Re: [WillysTech] What's going on? ?
I heard the distributer works great, I call Kaiser once in a while to see if they got a 6 volt replacement. First Street has a nice setup for Ford model T's only thats's for 6 volt, so it might be coming..
On Friday, February 28, 2025 at 06:38:12 PM MST, steve boyer via groups.io <flash7313@...> wrote:
think the kaiser-willys website sells a replacement distributer with electronic ignition.? not sure if they have your year available though.? i replaced my points with a petronix set-up and it's worked out well? for me.? mine is a little newer
than yours. good luck.
On Friday, February 28, 2025 at 08:22:54 PM EST, Dan Mulholland via groups.io <mulhollanddr@...> wrote:
In my case, I put off returning the steering gear and shaft, etc, to the wagon until it warms up.? Which it is doing.? I just can't get myself out to an unheated garage when it's under 50 degrees.? What a wimp.?? My friend the retired mechanic is advising that
I replace the distributor, the concern being that the plate where the points attach is excessively worn; needs bearings; the shaft is 180 degrees out, etc.? A new one will not be original, as far as I can tell, the one from the Jeepsterman does not use the
vacuum advance.? If I find a rebuilder, perhaps that's the way to go. Opinions welcome!
-- Dan 53 2wd Wagon Eugene, OR -- Dan 53 2wd Wagon Eugene, OR |
