Good Afternoon Al,
I have Rocky set up on my PC for checking operation of RX II and RXTX units that I have built.
I would be happy to make sure your RX II board is playing properly if you would send it to me. Cost would only be the return postage expense.
Regards,
Tony, kb9yig
toggle quoted message
Show quoted text
On Jan 1, 2022, at 11:25 AM, al2ok <al2@...> wrote:
Well . . . I removed the 570 software and the driver called PE0FKO-USB-Driver and reloaded both, it looks like this has been OK . . . all along. I wanted to remove both to see what happens with the 570 driver that shows in the Device Manager.
It looks like the PE0FKO-USB-Driver is in that same driver that shows in my Device Manager or part of it after you load both the 570 and PE0FKO-USB-Driver. So it seems both things are under that one. If somebody thinks this is wrong . . . speak up !
I can control the 570, I can connect / disconnet it ,etc. via my PC but I can't get anything from the RX Ensemble in the way of signals, nor control it via PC.
So . . . I guess the problem might be my "good old RX Ensemble " . . . I'll have to bring it to the bench ( the kitchen table ) and do some test on it someday.
again Thanks to all for the help. I'll play with it on / off , if I get it going . . . I'll let ya know !
Al
