开云体育

You have to tell us what exactly you are looking for. Connector type, gender, etc. Matt AL0R Sent: Thursday, May 8, 2025 20:30 To: [email protected] Subject: [repeater-builder] Heliax center

I am looking for center pins for Andrew Heliax connectors for both 1/2 inch LDF4-50 and 7/8th inch LDF5-50.? Male or female. Thanks de David, K5RAV

Sounds like you are losing your TX OSC Control +10V. You can watch that line in the fold down tray on the exciter pin header with a volt meter. If that is is case remove the power supply card and put

I can usually find good deals on eBay. Dave Bates

I just use the PSA series of male and female N connectors . No soldering. Dave Bates, KF?XQ [email protected]> wrote:

What connector? Joe, K1ike

Have you watched the 10 volts to make sure it's not changing? Joe, K1ike

You might try the RF Connection in Gaithersburg, MD. https://rfconnection.com/ RodN8RAT

for what type of cable?????

Does anyone know of a source for Andrew Heliax connector center pins?? Thanks de David, K5RAV

It is a GE Master II station. ?This is the rack style with the receiver fold down drawer and the card slots on the top. ?The controller is an RC-210. ? This has worked for years with no issues, and

It helps if we know what repeater it is. Sounds like a ge Mastr iI?What controller are you using. Is this a new issue on an existing ?system?or a. We repeater. That your putting together ?Neal

Need some help debugging our repeater. Here are the Symptoms: 1) transmit drops out after 3-4 seconds. 2) TX led on 10V regulator control card stays on another few. Seconds after TX drops. 3) as long

The isolator is likely doing little to keep the FM out of the repeater transmitter. Isolators only provide a significant degree of directivity within a fairly narrow range. Given the wide frequency

97.5 sounds more like it. The reason people are asking for the frequencies is to run an intermod program to see if your 146.100 receiver is going to get hit, or if any other intermod problems might

Correction on FM Station 97.5 [email protected]> wrote:

Check again on the FM Radio Station frequency. Did you have a typo? Bill Hudson W6CBS Sent: Thursday, May 8, 2025 2:01 PM To: [email protected] Subject: Re: [repeater-builder] Packet Node at

The FM station is like 96.4, the repeater is 146.700 and the packet station is yet to be determined, but somewhere in the packet sub band 144.9 - 145.9. Thanks for all the information. I'll start

You have to add the product to a cart to get the first pass pricing. Just looking won’t get you anywhere. Ava5P-50 with no discount is 3.86/ft Matt AL0R Sent: Thursday, May 8, 2025 14:54 To:

Those guys must have a special account. At first I didn't log in at Tessco, but I have now and checked the price. For me when I log in, the price is $2.00 for LDF4-50A and $4.96 for AVA5P-50-C Dan