开云体育

Is it the bottom half that has the splitter and jumper to the top section? If so how do you deal with that when using the bottom as a stand alone antenna?

I may be interested but I am not sure what you are sending? The top half or the bottom half of the 420, and with the mast or just the harness and loops? Please let me know. Joe [email protected]>

You have it wrong. 1. Drop your Baofeng in a septic tank. 2. Never look back. 3. Forget all the other things listed here. Mick - W7CAT

Hi Chad, This cable is available from a reputable vendor on eBay: https://www.ebay.com/itm/122562581175 I have used his cables on previous projects.? They all work well. You can program the

hi , does anyone have any of the following ? a cable from a Kenwood T K R eight fifty to the S com seven three three zero controller ? and , I'm looking for a copy of the programming software for that

Still available. All boxed up ready to ship. w6re

Oops.. .it's an 820 Thanks for catching that I need more coffee ? [email protected]> wrote:

Forgot to mention the repeater comes with a 12v. AC power supply installed in the other half of the cabinet that will be included in the sale. It is the 17A power supply with thermal fan from a

How did you program in 462 range? It is a vhf repeater.

Asking $300 obo + shipping...programmed in 462 range Chris WB5ITT

Selling the last Kenwood TKR-850-1 UHF repeater I have in the system. We are going to simulcasting so all repeaters needed a 10MHz reference input for the time base stability required to simulcast. As

Before you fuss with the antenna, if you want to see if the antenna is detuning your notches, first set up ideally with your sweep generator to at least 0 dBM output after the pad (at least 3dB pad),

Git 'er DUNN....

Better watch it Pierre. Using logic will only get you slammed by those who claim to know it all. We have several repeater sites that trigger alarms from not only intrusion, but power failure,

Time for levity- 1. Place your baofeng on the? repeater frequency. 2. in set menu of the baofeng.. set VOX on. set TX delay if baofeng? so optioned. 3. in set menu of the baofeng.. set Talk out

Greetings, Is the repeater's fault that it doesn't turn on properly? I've fixed several misfirings due to damage to those two components. Resistor R112 is what powers the devices. Corrosion damages

Hey Chris, if you could check and let me know, I would be interested in them. I would like 4 but will take what I can get. Thank you

Harold, Interesting stuff there in those links. Thanks for digging those up to share. I took the cans out of the cabinet yesterday to inspect the bottoms. I thought I had some thick copper tape from

This duplexer has been sold, thanks for the interest. Chad Nelson WI9HF/WRPL979 Janesville Wisconsin 608-754-8671 Send from my spectrum iPhone 16.

Hi everyone, I understand the concerns being discussed, and I don't want to cause any further disagreement. However, I wanted to offer another perspective on the situation. It seems to me that if the