开云体育

FCC Rules group is open for business! Come on over and blast away! ?FCC Rules part 97, 95, 90 and 22! Just keep the conversation civil! 73 Kevin

MTR2000 (UHF, 100w) which is reporting a PA fan fault, but the fan is spinning.? No funny noises of on fan behavior observed.? PS fan spins brief and then stops and is not reporting any

Tyler, I was mistaken on the par number. I have two models of radio interface here: TQ3370 and TQ3330. The TQ3330 is marked RANGR/DELTA with a cable. I have two TQ3370s (one new in a sealed bag) and

Actually - the definition says this - exactly: *Repeater-Builder is a free ***technical group *(free to you - we pay for a premium group plan) available to people seeking information on building ham

I've tested my DR-2X for battery switch over but have never left it connected for actual battery backup. Like any other repeater here I would use a 120VAC coil relay to disconnect the battery during

There is a micro fuse in the Yaesu supply that enables charging the battery. If the battery is very dead when the AC power restores there is a good probability that the fuse blew. You can open the

Oh, it probably did, then when power came back, the supply in the Yaesu Crow-bared or whatever it does. It's a common problem. I don't know the fix, other than don't let the Yaesu attempt to

Burt; Can you share what audio processor used in the W6MEP? Thanks K4SAT

You may want to better define "private". Matt AL0R From: [email protected] <[email protected]> On Behalf Of paul dallard via groups.io Sent: Friday, January 3, 2025

Hey Folks, I have both 220 and 440 Repeaters on my home tower. Cross-linked and equipped with Allstar and Echolink. I also have a GMRS repeater here as well. I also have a Fusion repeater here as

Back when I wrote the programmers for Phoenix and Delta, I used information including LBI31266B (Phoenix SX), LBI31360B (Phoenix SX scan), and a text file from the internet "GE Delta / Delta-SX EEPROM

" This is NOT the correct venue for discussing anything other than building, operating and maintaining amateur radio repeaters in accordance and compliance with 47CFR97." Repeaterbuilder isn't just

Our DR-2X repeater failed to switch to DC today when we had a power failure. Red “DC” light is on but repeater is dead. It is connected to a 12v 390 ah automotive battery. Any ideas?

He’s famous I don’t think they would be to happy!

I think the mods killed the original thread, let's not reignite it. -c -- Chris Baldwin, CETSr. (KF6AJM) Trustee - MetroNET Cal. Intertie (KB3PX)

I agree. This is NOT the correct venue for discussing anything other than building, operating and maintaining amateur radio repeaters in accordance and compliance with 47CFR97. IF you know of

Jeremy, Can you give me more info on the tq3312? WZ5TX David “Tyler” Bufkin ________________________________ Sent: Friday, January 3, 2025 11:43:49 AM To: [email protected]

The Kenwood NX-5700 works great for aprs can be used for other uses and the aprs modem pulls it to the aprs channel sends data and reverts to normal operation Roger

well to bad Ted i am far a way, i have an 32 channell Phoenix here that need to be reprogrammed! i used to have a small programmer from NHRC but i lost it! i need to reprogrammed for an AllStar node

Tyler, Not that it helps in this situation, but I have an extra TQ3312 PC programming interface (which I thought worked with the Rangr) that I'm willing to part with. I don't need two. I also have a