And hang times...
So you set up the repeater to transmit PL only during active
receive. The COR drops, the tone stops, and the CT, ID and hang
time are now invisible to the Allstar receiver.
Chuck
WB2EDV
On 3/22/2025 9:15 PM, Teton Amateur
Radio Repeater Association (TARRA) via groups.io wrote:
toggle quoted message
Show quoted text
Not
quite so simple. You need to get rid of the repeater IDs and any
courtesy tones.
Mick - W7CAT
----- Original Message -----
From: "Sepehr - N6IRN via groups.io"
To: [email protected]
Sent: Saturday, March 22, 2025 03:15:51 PM
Subject: Re: [repeater-builder] Internet provision at a remote
repeater site?
> If AllStar is all you want to accomplish, you could just set
up an AllStar node and set it to TX on your repeater's receive
frequency and RX on your repeater's transmit frequency, just like
how you would program any other radio for that repeater.
>
> That way, you can keep the AllStar node at home, where you
have reliable internet, and make an RF link to the repeater.
>
>
> >
>
>
