开云体育

QRZ will accept image files. Kerry VK2TIL.

Hey Fred, good to see a familiar face here. I hope you and all are well. I have retired and moved up into the north Georgia woods and very much enjoy a totally quiet location in the woods. 73 old

ERROR.......ERROR...........Wrong attachment.........Sorry. Hopefully, this time, I get the intended file....... Try again and have a look at the attachment. I've added a fair amount of new

OK, this is it. Please have a read of the attachment as there is some good additional information including measurement of amplitude balance and phase behavior of the DM side of the CMCs. Now,

Can anyone tell me the basic differences between these two devices. I mainly want to know which one would best suit me as a ham operator building wire antennas. I have watched numerous YT videos and

Manfred, Re: There are always those snakes who will seek to take advantage of people's ignorance. If boosting their victims self esteem by feeding them wive's tails and simple explanations

Welcome aboard Jim. Fred Moore, N4CLA

Thank you Manfred. Yes, I see where I misspoke. I will review yours and other available sources. I did see where B is proportional to E in the field equation and mu is nowhere to be found. But I'll

Yesterday, I put the VNA away and invoked the signal generator (HP 8648C) and an o'scope (Agilent DS06104A). I specifically looked at the amplitude balance and phase relationship on the DM side of

Yes it is. I used to turn mine off and on again, but I then had to start again. Somehow I discovered that if you move the rocker switch, the on screen numeric keyboard comes back to normal, then you

Dave, Too many! Because you get too much stray capacitance. Probably that choke with 22 turns on a huge toroid stack has so much capacitance that the capacitance dominates over the entire spectrum,

It's still in development, Hugen will manufacture it ... [email protected]> wrote:

Since the firmware was made a year ago, please update the firmware to the latest 1.0.45 so that you can use it with the latest software. NanoVNA-App v1.0.205. Read my website for details. -- *** If

You probably got a device from the first production, the fault of which was that the cover was pressed against the touch screen and due to constant pressure it could not log in either. What to do:

Where is Jan’s vna offered for sale? Thanks!

Hello, I have just bought a NanoVNA V2 called 3.2" "black and gold". As soon as arrived, I updated its firmware with the latest on NanoVNA website by NanoVNA-QT,

My new analyzer stucks when I turn it on. Touch Screen do not work. It generates error: si5351-init failed. What is wrong? Version 0.5.0 edy 555 Kernel: 5.1.0

I would suggest that the first step would be to Save the original calibration; which was carried out at the factory, saved into SAVE 0; into SAVE 4. (Zero is always loaded when first switched

Will the new models be capable of measuring crystal responses ? Quote : Note: All V2 versions switch on and off the test signal rapidly and can not measure crystals or be used as a signal

Good luck and have fun!