I would suggest that the first step would be to Save the original
calibration; which was carried out at the factory, saved into SAVE 0; into
SAVE 4.
(Zero is always loaded when first switched on.)
Steps in the menu are:
CAL> SAVE> SAVE 4.
This will then be available to:
RECALL> RECALL 4> Back> CAL> SAVE> SAVE 0.
if you get lost and need to start from scratch at a later date.
I wish I had done this first.
toggle quoted message
Show quoted text
On Mon, 25 Jan 2021, 09:23 mirskym, <mirskym@...> wrote:
Good luck and have fun!
