开云体育

The lid is in the picture to the right of the base and NanoVNA. I keep the case and accessories in a canvas zipper bag with allows for additional adapters for different kinds on cables you may come

Seems to me it needs a lid and space for the cables, cal kit, adapters, etc. Of course *which* adapters is a very loaded question. For the moment the very nice box it came in will do for me.

Rees, At 1dB/div, a REFERENCE POSITION value of 14 puts a -10dB response at mid-screen. Is that what you are looking for, or do you want a more intuitive entry method? --John Gord

Hi Developper Team, Since a week I have a NanoVna-H4 with SW version 0.5.0 It is a nice instrument for investigation of someone's designs. After playing with the possibilities of this instrument I

Try NanoVNA-Saver 0.2.2-1, as far as I know it is 32 bit and an exe is available for windows. It works when the newer versions won't. https://github.com/NanoVNA-Saver/nanovna-saver/releases/tag/v0.2.2

Hello, I need help. I have a NanoVNA-H which goes to 900 MHZ which I purchased from GigaParts . I ordered that to use while waiting for my NanoVNA V2 from Tindie which should arrive very soon. As

https://go.teledynelecroy.com/l/48392/2020-05-15/7yfrt2?utm_source=linkedin&utm_medium=linkedin&utm_campaign=20-07-16+Bogatin+Sparam+Masterclass+Part+1+

Phil, The connector is obviously defective and the unit is new, ask the seller to replace it - can't hurt to try.? ... Larry On Fri, 17 Jul 2020 at 3:51 PM, p01lindsey@...<p01lindsey@...>

Larry, thanks for the lead. After checking the board etc., looked inside the USB-C connector itself and one of the sides had maybe 3 of the pins smashed and shorted inside. So new connector needed, I

Have you installed the drivers? The nanoVNA uses a serial to USB device to convers on USB. Check out FTDI for the latest drivers. Verstuurd vanaf mijn iPhone

Thanks Roger, did all of that still nothing. In win7 when I plug it in the USB never responds in any way at all like as if nothing ever was connected at all. Nothing in the device manager, and nothing

Thanks for the response! On the cable, just got a new fancy one from amazon and tried it this morning before sending out my email. I was hopeful that it would work and it did not.......then emailed

At this moment as you can see i update UI and next release name as v1.0.1 UI fixes still not fully comleted (for see changes need reset config for apply new colors)

@DiSlord - let me ask you kindly following - your H4 branch fw version string comes from "git describe --tags" which shows always 0.7.1... What would you recommend to put in the VERSION string such I

Try test 200-350MHz range for better search threshold limit. PS then i work under H4 vs SI5351+SI4432 i rewrite sweep mode, now it use band table for better ajust settings I think remove threshold as

Guys, you have to find your SI5351 max frequency, those 310M is the value I flashed in (for experimental reasons only) because I found out my max frequency is 321MHz..

I tried it, my NANOVNA-H overheated more slowly with this setting. Gary AG7TH

The SI chip is specified up to 200Mhz. Have you tried it with this threshold? Mike N2NS

On Fri, Jul 17, 2020 at 03:54 PM, DiSlord wrote: .. > In nanovna.h i begin use AUDIO_CLOCK_REF (86016000U) > Try revert to #define AUDIO_CLOCK_REF ( 8000000U) > // 5ms @ 96kHz > // Define aic3204

A basic question for you:? have you tried a second USB cable with the H4? There have been instances of companies shipping cheap cables that fail quickly.? You might also want to open the H4 housing