开云体育

Can QSSTV support multiple configurations? I can't find anything in the manual about it. 73 Phil GM3ZZA

Hi everyone, I've just added XMLRPC support for my log program. https://github.com/leventelist/llog Thanks HA2OS for the example. 73s de HA5OGL -- Levente Kovacs Senior Electronic Engineer W: http://levente.logonex.eu

Hi. Using Fldigi 4.2.06.07 Why is it, that when using PSK31 if one invokes the INFO1 and INFO2 signal report macro's, where you get a S/N and IMD value to report to the other op. But, using the other faster (single channel/carrier) PSK modes, though you get a S/N value, the IMD report is replaced by "Phase" and a value. The same is shown in the small readouts at the very bottom of the Fldigi UI. First question:- Is this intentional? (If so, why?) Second question:- What does the "Phase" value relate to, and why that instead of IMD? (A higher value seems to be shown for worse IMD sidebands, yes "many" from some stations!.) I cannot find anything in the user manual about this. Only links to Wikipedia that relate to phase encoding. Someone put me out of my misery please! :-) Best Regards. Dave G0WBX.

Noticed today a DominoEX Micro QSO was being recognised as THOR 25. In fldigi 4.2.06.21 ./src/rsid/rsid_defs.cxx the same RSID code exists? ---- ELEM2_(691, THOR25, MODE_THOR25) \ ---- ELEM2_(691, DOMINOEX_MICRO, MODE_DOMINOEXMICRO) \ ---- In the Wed Jan 1 20:39:59 2025 -0600 commit the remark - assigned secondary RsID code 691 to THOR-25 Not sure how this all works but may be relevant. Cheers Bob VK2YQA

The Country (CTY) Files were updated on 31 January 2025: https://www.country-files.com/cty-3504-31-january-2025/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over the word Contest in the menu, then select the software you are using. To install the file, follow the link to your software at the top of the page. If you are interested in a bigger CTY.DAT for everyday logging, you can get it here: https://www.country-files.com/big-cty-31-january-2025/ Note that the release notes (and Version Entity) for this larger file are different than what is shown below. There is a separate link to them. As a reminder, there is an RSS feed of the latest country file announcements: https://www.country-files.com/feed/ Here are the release notes: 31 January 2025 (CTY-3504) VER20250131, Version entity is Palestine, E4 Added/changed Entities/Prefixes/Callsigns: * OJ1ABOA is Antarctica, CE9 in CQ zone 38, ITU zone 67 * TO4A is Martinique, FM * M0EDQ is Scotland, GM * II0ICV is Sardinia, IS * KD5AJC is United States, K in CQ zone 3, ITU zone 6 * KE4SVI is United States, K in CQ zone 4, ITU zone 8 * K4XV and KG5GBZ are both Hawaii, KH6 * KG7PAF and KG7PAH are both Alaska, KL * LU7DZV/D is Argentina, LU * SV1GA/A is Mount Athos, SV/a * R100AE, R100ME, R900BL, R900DM, R900DV, R900RO, R9JQ/6, RA0BM/6 and UE82AWD are all European Russia, UA * RT2F/P is Kaliningrad, UA2 * RV1CC/0 and RW6MD/0 are both Asiatic Russia, UA9 in CQ zone 19, ITU zone 25 * VK9YB is Norfolk Island, VK9N * KC4/KB1EHE and KC4/KB1IFZ are both South Shetland Islands, VP8/h Removed Entities/Prefixes/Callsigns: * 3D2Y in Rotuma Island, 3D2/r * A61Q/ND in United Arab Emirates, A6 * BA4DL/0 in China, BY * EA9ADD/P in Spain, EA * TX5NH in French Polynesia, FO * TO9W in St. Martin, FS * W3NX in United States, K * KG4OUW and KJ7KMD in Alaska, KL * K4W in Puerto Rico, KP4 * LU9JDZ/F in Argentina, LU * R1941MB, R1941OM, R900, R9OM/6, UA5B/4 and UA9UMF/6 in European Russia, UA * RX9WT/P and UA0KBG/9 in Asiatic Russia, UA9 Though I am subscribed to this reflector so that I can make these announcements, I do not see most messages posted to it. If you have any comments or corrections to the country file, please contact me directly. 73 - Jim AD1C -- Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://ad1c.us

FLDIGI launches and then closes. I get this error when I install via the repo or compile myself. "malloc(): unaligned tcache chunk detected" . The flatpak seems to work fine but when I put my custom macros in the /home/user/.fldigi/macros directory, it does not see them. OS: Linux Mint 22.1 x86_64 -- DE KK4WB Jason

I have successfully installed Fldigi 4.2.03 on Ubuntu 24.4 I have good rig-control between Fldigi and my transceiver. But I am unable to get audio from my transceiver to Fldigi. I do have audio from my transceiver to my computer because I can see it on the Pulse Audio Volume control bar-graph. Ubuntu 24.04 uses Pipewire for audio, but W1HJK indicates that this is not an issue with Fldigi. On Fldigi configuration/Soundcard/Devices I select PulseAudio but I have no clue how to determine the Server string. Therefor this is probably the issue I am facing. I have looked up Server string in the file fldigi_def.xml <PULSESERVER></PULSESERVER> Putting that in for the Server String field on the configuration window, I get a Pulse Audio error: “Connection refused” “Is the server running?” But there is no PulseAudio server in Ubuntu 24.04 Anyone have any ideas about getting the audio into Fldigi? Thanks.

I am in the process of moving the entire w1hkj web site to be hosted at QTH.com. The new site is https://www.w1hkj.or Please visit the site and report any discrepancies, particularly misdirection of links. fldigi, flrig, etal still need to be modified to reflect this move to the QTH host. 73, David W1HKJ

Hi Dave, I had a quick look. The link to fldigi opens a directory with just the help text file in it. The one to flrig has all the files. 73 Phul G3ZZA

I run UBUNTU 22.04.05 LTS and want to get back into SSTV. What software package will run ? Are there any dependencies I need to look our for?

The Keystone ARC in York, PA, runs a SSTV repeater on 28.680. It requires a 1477 Hz tone for 1.5 seconds that (should) trigger the repeater to send a CW-ID. Then, one can send a SSTV image to be received by the repeater. I use QSSTV in Ubuntu which does have a 'Transmit Tone' feature (little music note in the transmit panel). However, the transmit time variable appears to be type integer, so it's 1 second or 2 seconds....not 1.5 seconds. So, I thought I'd try to get FLDIGI (4.2.06) to generate that tone (and give me an opportunity to explore some of the seldom-used macro commands). Here's what I came up with: <PUSH> <TXRSID:on|off|t> <GOFREQ:1477> <TUNE:1.5> <RX> <TXRSID:on|off|t> <POP> In theory, FLDIGI should transmit just a 1477 Hz tone for 1.5 seconds, then return to whatever cursor audio frequency and TXRSID state it was in prior to executing the macro. It sort-of works. Audio frequency doesn't change but the rig goes to transmit for about the right time. Starting with TXRSID selected, it doesn't seem to toggle and it transmits a TXRSID before returning to receive. So, TXRSID:on|off|t and GOFREQ don't seem to work as I'd have expected. I suspect I'm not using these macro commands correctly....I'd welcome anyone more familiar with these that cares to comment/suggest. 73 Keith/KI5US

Having a difficult time finding a logging program that works on Ubuntu 24.04. CQRLOG has problems with MySQL. Same with XLOG. KLOG will not interface with LOTW either directly or through ADIF file - TQSL gives errors on KLOG generated ADIF file. Anyone had success with a decent logging program on Ubuntu 24.04? Thanks

Please note that you will no longer be able to reach me at w1hkj@.... That account has been closed. I do monitor these groups: . linuxham . nbem . winfldigi Thank you. 73, David W1HKJ

I’m currently using Ham Radio Deluxe, WSJT-X and Grid Tracker on my Win 10 machine. Works very well. I’m considering switching to Unix. My understanding is that HRD is a Windows Ap and will not work on Unix unless used on a VM. I’m guessing that I would install a VM on Unix and run all three of my FT8 programs in windows. All suggestions welcome. thanx… -- de Fred W0SP

Hi Everybody, Version 26C is the most recent release to date of Andy's Ham Radio Linux, and it is available now. Please go to Files/v26c and download a copy of the GETTING_STARTED document. These instructions will guide you. If you have installed a previous version of AHRL, that's OK! Just install this new stuff over the old stuff. Supported flavors of Linux: Debian Live 12.7.0 Ubuntu 24.04.* Xubuntu 24.04.* Kubuntu 24.04.* Linux Mint 22 Raspberry Pi OS 5.5 Other Ubuntu derivatives MIGHT work. If you try it, please let me know the results. For more information: https://sourceforge.net/projects/kb1oiq-andysham/files/v26c/ Have fun and 73, Andy KB1OIQ ..

Dave (W1HKJ), having issues pulling up your site for any docs. Can't tell if it's your hosting provider or Cloudflare or my ISP's DNS, but I'm getting anything to the w1hkj domain redirected to the British Sundial Society site. Anyone else seeing this? Any help to narrow it down would be good.