开云体育

... then log out and back in again Dave G0CER [email protected]> wrote: -- 73 Dave H G0CER http://www.eQSL.cc/Member.cfm?G0CER http://g0cer.blogspot.com

Mike, I suspect you simply need to add your user to the dialout usergroup: sudo usermod -a -G dialout $USER = *sudo usermod -a -G dialout mike* 73's, Glenn WA6BJQ [email protected]> wrote:

As Andrew said, on Tumbleweed just add yourself to the dialout group. As to Wayland that would have been installed by default on Tumbleweed, so on the login screen just look at the lower left and

Probably the user account does not have adequate permission for CAT control.? This could be as easy as making the user a member of the 'dialout' group.? This issue has come up here in the past.?

One last note here is that all of the settings below work fine with FLDigi*, JS8Call and WSJT-X. ?Your choice of *CAT RATE* or *CAT TOT* can be set for your personal preference / system when using an

Got all the updates done. Installed WSJT-x 2.6, but the CAT feature will only work in root.? I cannot get it to provide serial com access in the user account.? What do I need to tweak to get the CAT

Hi Everybody, I cleaned up ?a few bugs in the alpha1 version and have released the beta1 version. ?It can be found here: https://sourceforge.net/projects/kb1oiq-andysham/files/v26/ I've removed the

Did my previous reply make it through?

Using a number of PSKR multicarrier modems (eg 63RC64, 125RC4,5,12,16, 250RC3,5) I have found that AFC does not "move" the audio carrier back and forth like it does for the single carrier PSK-125R,

I rebuilt a Debian 12 machine with xfce4 from scratch within the past week with fldigi 4.2.05 compiled from source.? No problems seen.? As a matter of fact, it resolved audio and CAT problems I was

I believe the XFCE bug is back. Reproduction is as follows: - boot the OS - launch Fldigi 4.2.05 - press Alt+Tab After that, OS hangs for a moment and windows lose their frames. Lightdm restart helps.

While a bit simpler approach, I made some documentation with a far simpler approach.? It might add some ?flavour to the topic. https://www.homelinux.no/radio/image-resize Just to give the family at

If you want really good compression for small text inputs use a large language model, e.g. https://bellard.org/ts_zip/ you can get results on the order of 1.5 bits per character. Compression and

I had originally thought to make this a wiki entry, but this and other ideas are probably worth discussing. It may be of use to the NBEMS groups. Note these methods generally are not worth it if the

Turns out that after restarting my MacBook Pro M3 (Apple Silicon/ARM) running 14.5 and loading FLDigi again, the above mentioned changes were not entirely sufficient to yield consistent results -

The Country (CTY) Files were updated on 23 July 2024: https://www.country-files.com/cty-3425-23-july-2024/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over

Hi. Rather than totally mute the RX audio (and presumably TX too.) Might I suggest just set it to a low level that you can hear quietly. The reasoning? We all share spectrum with each other, and it's

Hi Ole Perhaps use the Configuration|Commands in flrig? That has 24 "buttons" that can be configured to send any CAT command, plus 4 possible commands that can be auto-launched on pgm start and exit.

Hi, after using the Q900 onboard my boat for a few months now, I have narrowed the functions I really would like to see in the flrig application. When switching between voice and digital modes I need

Man, the good old days :) Rick, K9AO