开云体育

The developers may need to look at the wsjtx cat <> cat FLrig coding, does FLrig ptt work direct from FLrig ? To get going on wsjtx in the meantime, you could use vox. 73 vk4tux

Sorry I should have specified, FLRIG is using cat <vk4tux@...> wrote:

Is FLrig using cat or RTS/DTR style ptt ? If RTS ptt is doable you can set that direct in wsjtx ptt section without affecting FLrig interface. 73 vk4tux

I have successfully connected my radio to FLRIG, when I go to WSJTX and select the rig as FLRIG I am able to get the cat connected, but when I test PTT it does not trigger my radio. Any help is

Dave, thanks for the response, and that's great, I'll branch from sourceforge. I'm surprised I didn't find it there. I would love to have another kachina, for parts if nothing else. And maybe I can

Hi Bill, I never included the kcat / kcts control in flrig primarily because the 505DSP requires a bit more attention to I/O than does other transceivers. The possible exception being the Paragon.

I found Ultra Viewer to work well.? It is free for the basic features.? I run it on Xubuntu and Windows 11. 73, Dave -- *Dave W3EO *

I found Ultra Viewer to work well.? It is free for the basic features.? I run it on Xubuntu and Windows 11. 73, Dave -- *Dave W3EO *

Just stumbled across this podcast with Dave W1HKJ. It was a good listen, I recommend it: https://www.qsotoday.com/podcasts/w1hkj Confession: I didn't exactly stumble across it - I was searching for

Hi Everybody, Andy's Ham Radio Linux (AHRL) v26d has been released.? Several software packages were updated (enumerated in the CHANGES file).? Support was added for LMDE6.? For more info and a

I'm running fldigi 4.2.06 built from source. If run from the command line, and/or if I look at the ~/.fldigi/debug/status_log.txt, I see a very dense log, including I: and D: messages, even though the

Thanks David, after I entered q (quit) and ran your command it looks like pavucontrol is now installed with the log below. That's quite a command :-) 73, Ron

What does "sudo apt --no-install-recommends install pavucontrol" do? I have pavucontrol installed on u24.04.2 here so it's definitely possible. --David KI6ZHD

Hi All, I'm trying to follow the Wiki install on my Unbuntu 24.04.2 and I'm getting the following when I try to install pavucontrol. I'm not sure how to continue. 73, Ron

I found a website on the Linux Mint group that set up an X11 server on my portable machine. I'm able to log in via VNC. Do you think I can find it on my 75-year-old brain? 73 *Don PoapsNew

I concur with Neil. When I installed Teamviewer on Ubuntu I was horrified at the background processes that it installed silently. It took hours to remove all the garbage. I would not recommend

or dwagent by dwservice.net 73 Danny, K5CG HH 550-0609 SKCC 14257 To: "linuxham" <[email protected]> Sent: Wednesday, April 23, 2025 6:10:18 AM Subject: Re: [linuxham] Teamviewer on Debian

Adrian, all, I would advise against using TeamViewer, as it currently has concerning security issues, and might as well be malware. I suggest using RustDesk instead. It's an open-source alternative

The Country (CTY) Files were updated on 22 April 2025: https://www.country-files.com/cty-3512-22-april-2025/ For installation instructions, start at: https://www.country-files.com/ Hover

This is untested, but give it a try. It uses the XML interface that is included in fldigi (and I think it was made so that you could do exactly what you are wanting to do!) Make sure you have: *