开云体育

Adrian, I use the WIKI install directions: https://sourceforge.net/p/fldigi/wiki/debian_howto/ I've never had a problem with it unless there's something different with the new version of Linux Mint

Yep, so the multiple entries of Fldigi must be different functions of Fldigi that's running and not just multi instances. So when I first start my Fldigi the CPU is around 21.1% and yours is 8.2. I

Thanks Adrian, Maybe I'm getting TOP and HTOP mixed up. Your right I only see 1 instance of Fldigi with top but HTOP shows multiple instances. I thought HTOP was the newer better version but maybe

Thanks David, I will select Pulse Audio. That's interesting about the "nice" factor and how to change it. According to HTOP it looks like NI was at 0. Do you recommend another setting? Also, the

<vk4tux@...> wrote: Full power on other modes, basically anything that uses the mic. I think Dave was on to something about not getting RF on CW but I changed the KEYER setting to ON

Ron, You should be able to select "Pulse audio" check box on the configuration tab for audio devices. Pipewire will be used. The "nice" factor determines how much CPU a specific executing program

Adrian, that's the interesting thing is I'm not sure why multiple Fldigi instances are running. Next time I'll have to do the sudo pkill fldigi and see what happens. David, I have Pipewire selected

1. open the bandwidth on the transceiver. Narrow BW is good for your ears, not necessarily good for machine decode. 2. lower the digital squelch (right most control next to

Pulseaudio or Pipewire ? What is the "nice" factor for each of the instances? Only one instance should be transceiver control (or use flrig, it can support multiple clients). If two of the

Dave, This weekend, I did not see any RTTY, so I thought I would try CW decode. ?I see the same issue of FLDigi not decoding. ?You can decode by just looking at the CW coming through. ?I am not

Hi All, I'm still fighting the problem with Fldigi freezing on me with Linux Mint 22.1 and Fldigi 4.2.04.24. Today on the 80 meter NBEMS nets at about 2 hours worth of net activity on a few different

Regarding this topic in general - I've obtained several Chromebooks and Chromeboxes via eBay that have had Chrome wiped and UEFI boot installed.?? That makes is very easy to install UEFI supported

Thank you for teaching me that, Dave! Roberto: their Chromebooks were wiped of the native operating system before installing Linux. That's all I know.

Drew, just in order to be sure to understand: when you say "Chromebook running Debian" you mean a Chromebook where ChromeOS was wiped out and Debian installed as a single boot OS? Are there any way

Have you tried removing the hub from the COM port electrical path? Is the hub an Apple or a 3rd party device? David [email protected]> wrote:

Use Generic contest, set up as: [image: image.png] with attached MACRO definitions. [email protected]> wrote:

Re:- sudo adduser fkatalenas dialout . . . For anyone else reading this in the future, change fkatalenas to your user name in the sudo command above. Or, just... sudo adduser $USER dialout. The

Good day David. I've already tried to set it up several times before the test https://www.rdrclub.ru/russian-ww-psk-contest/49-rus-ww-psk-rules. But it doesn't work quickly, you have to abandon the

I recently tried to run flrig 2.0.05 and it tells me the COM port is not responding. I then go into config and select /dev/tty.SLAB_USBtoUART4. After Pressing init it hangs and a forced quit is

If you can open and run FLDIGI, but you can't select sound cards or transmit, you may need to add your username to the dialout group. Open a terminal and type: sudo adduser fkatalenas