¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Linuxham
  2. Messages
Expanded Topics Messages Polls
Date
Re: Connecting Xiegu X6100 using FLRIG to WSJTX Linux Mint

 

¿ªÔÆÌåÓý

Also if you have HRD in windows, it also runs very well in linux under wine/bottle/crossover etc, and works great with linux wsjtx.

I use it here with a FT-897D that I had issue with other methods incl flrig on Debian. Mainly when using rig split.

I think your radio use's IC-7300 cat code. As I said if you setup radio vox, and set wsjtx ptt to vox (which means wsjtx does nothing for ptt and leavces it to the vox device),

Then it should work fine. I use the same method vox with my Elecraft KX3 on wsjtx for reliability.


73


vk4tux

On 28/4/25 09:05, KQ4DAA via groups.io wrote:

Yes, PTT does work using FLRIG. I am a complete newbie to setting up digital modes, as well as running linux.

On Sun, Apr 27, 2025 at 6:04?PM Adrian Fewster, VK4TUX via <vk4tux=[email protected]> wrote:

The developers may need to look at the wsjtx cat <> cat FLrig coding, does FLrig ptt work direct from FLrig ?

To get going on wsjtx in the meantime, you could use vox.


73


vk4tux

On 28/4/25 08:58, KQ4DAA via wrote:
Sorry I should have specified, FLRIG is using cat

On Sun, Apr 27, 2025 at 5:57?PM Adrian Fewster, VK4TUX via <vk4tux=[email protected]> wrote:

Is FLrig using cat or RTS/DTR style ptt ?

If RTS ptt is doable you can set that direct in wsjtx ptt section without affecting FLrig interface.

73


vk4tux

On 28/4/25 08:20, KQ4DAA via wrote:
I have successfully connected my radio to FLRIG, when I go to WSJTX and select the rig as FLRIG I am able to get the cat connected, but when I test PTT it does not trigger my radio. Any help is greatly appreciated.
?
Landon KQ4DAA
Re: Connecting Xiegu X6100 using FLRIG to WSJTX Linux Mint

 

Yes I had CAT selected. WSJTX?was randomly closing out on me, and at this time I am reinstalling it.


On Sun, Apr 27, 2025 at 6:08?PM Adrian Fewster, VK4TUX via <vk4tux=[email protected]> wrote:

So in wsjtx ptt section, what do you have selected there, cat ?


73


vk4tux

On 28/4/25 09:05, KQ4DAA via wrote:
Yes, PTT does work using FLRIG. I am a complete newbie to setting up digital modes, as well as running linux.

On Sun, Apr 27, 2025 at 6:04?PM Adrian Fewster, VK4TUX via <vk4tux=[email protected]> wrote:

The developers may need to look at the wsjtx cat <> cat FLrig coding, does FLrig ptt work direct from FLrig ?

To get going on wsjtx in the meantime, you could use vox.


73


vk4tux

On 28/4/25 08:58, KQ4DAA via wrote:
Sorry I should have specified, FLRIG is using cat

On Sun, Apr 27, 2025 at 5:57?PM Adrian Fewster, VK4TUX via <vk4tux=[email protected]> wrote:

Is FLrig using cat or RTS/DTR style ptt ?

If RTS ptt is doable you can set that direct in wsjtx ptt section without affecting FLrig interface.

73


vk4tux

On 28/4/25 08:20, KQ4DAA via wrote:
I have successfully connected my radio to FLRIG, when I go to WSJTX and select the rig as FLRIG I am able to get the cat connected, but when I test PTT it does not trigger my radio. Any help is greatly appreciated.
?
Landon KQ4DAA
Re: Connecting Xiegu X6100 using FLRIG to WSJTX Linux Mint

 

¿ªÔÆÌåÓý

So in wsjtx ptt section, what do you have selected there, cat ?


73


vk4tux

On 28/4/25 09:05, KQ4DAA via groups.io wrote:

Yes, PTT does work using FLRIG. I am a complete newbie to setting up digital modes, as well as running linux.

On Sun, Apr 27, 2025 at 6:04?PM Adrian Fewster, VK4TUX via <vk4tux=[email protected]> wrote:

The developers may need to look at the wsjtx cat <> cat FLrig coding, does FLrig ptt work direct from FLrig ?

To get going on wsjtx in the meantime, you could use vox.


73


vk4tux

On 28/4/25 08:58, KQ4DAA via wrote:
Sorry I should have specified, FLRIG is using cat

On Sun, Apr 27, 2025 at 5:57?PM Adrian Fewster, VK4TUX via <vk4tux=[email protected]> wrote:

Is FLrig using cat or RTS/DTR style ptt ?

If RTS ptt is doable you can set that direct in wsjtx ptt section without affecting FLrig interface.

73


vk4tux

On 28/4/25 08:20, KQ4DAA via wrote:
I have successfully connected my radio to FLRIG, when I go to WSJTX and select the rig as FLRIG I am able to get the cat connected, but when I test PTT it does not trigger my radio. Any help is greatly appreciated.
?
Landon KQ4DAA
Re: Connecting Xiegu X6100 using FLRIG to WSJTX Linux Mint

 

Yes, PTT does work using FLRIG. I am a complete newbie to setting up digital modes, as well as running linux.


On Sun, Apr 27, 2025 at 6:04?PM Adrian Fewster, VK4TUX via <vk4tux=[email protected]> wrote:

The developers may need to look at the wsjtx cat <> cat FLrig coding, does FLrig ptt work direct from FLrig ?

To get going on wsjtx in the meantime, you could use vox.


73


vk4tux

On 28/4/25 08:58, KQ4DAA via wrote:
Sorry I should have specified, FLRIG is using cat

On Sun, Apr 27, 2025 at 5:57?PM Adrian Fewster, VK4TUX via <vk4tux=[email protected]> wrote:

Is FLrig using cat or RTS/DTR style ptt ?

If RTS ptt is doable you can set that direct in wsjtx ptt section without affecting FLrig interface.

73


vk4tux

On 28/4/25 08:20, KQ4DAA via wrote:
I have successfully connected my radio to FLRIG, when I go to WSJTX and select the rig as FLRIG I am able to get the cat connected, but when I test PTT it does not trigger my radio. Any help is greatly appreciated.
?
Landon KQ4DAA
Re: Connecting Xiegu X6100 using FLRIG to WSJTX Linux Mint

 

¿ªÔÆÌåÓý

The developers may need to look at the wsjtx cat <> cat FLrig coding, does FLrig ptt work direct from FLrig ?

To get going on wsjtx in the meantime, you could use vox.


73


vk4tux

On 28/4/25 08:58, KQ4DAA via groups.io wrote:

Sorry I should have specified, FLRIG is using cat

On Sun, Apr 27, 2025 at 5:57?PM Adrian Fewster, VK4TUX via <vk4tux=[email protected]> wrote:

Is FLrig using cat or RTS/DTR style ptt ?

If RTS ptt is doable you can set that direct in wsjtx ptt section without affecting FLrig interface.

73


vk4tux

On 28/4/25 08:20, KQ4DAA via wrote:
I have successfully connected my radio to FLRIG, when I go to WSJTX and select the rig as FLRIG I am able to get the cat connected, but when I test PTT it does not trigger my radio. Any help is greatly appreciated.
?
Landon KQ4DAA
Re: Connecting Xiegu X6100 using FLRIG to WSJTX Linux Mint

 

Sorry I should have specified, FLRIG is using cat


On Sun, Apr 27, 2025 at 5:57?PM Adrian Fewster, VK4TUX via <vk4tux=[email protected]> wrote:

Is FLrig using cat or RTS/DTR style ptt ?

If RTS ptt is doable you can set that direct in wsjtx ptt section without affecting FLrig interface.

73


vk4tux

On 28/4/25 08:20, KQ4DAA via wrote:
I have successfully connected my radio to FLRIG, when I go to WSJTX and select the rig as FLRIG I am able to get the cat connected, but when I test PTT it does not trigger my radio. Any help is greatly appreciated.
?
Landon KQ4DAA
Re: Connecting Xiegu X6100 using FLRIG to WSJTX Linux Mint

 

¿ªÔÆÌåÓý

Is FLrig using cat or RTS/DTR style ptt ?

If RTS ptt is doable you can set that direct in wsjtx ptt section without affecting FLrig interface.

73


vk4tux

On 28/4/25 08:20, KQ4DAA via groups.io wrote:

I have successfully connected my radio to FLRIG, when I go to WSJTX and select the rig as FLRIG I am able to get the cat connected, but when I test PTT it does not trigger my radio. Any help is greatly appreciated.
?
Landon KQ4DAA
Connecting Xiegu X6100 using FLRIG to WSJTX Linux Mint

 

I have successfully connected my radio to FLRIG, when I go to WSJTX and select the rig as FLRIG I am able to get the cat connected, but when I test PTT it does not trigger my radio. Any help is greatly appreciated.
?
Landon KQ4DAA
Re: QSO today podcast with W1HKJ

 

Dave, thanks for the response, and that's great, I'll branch from sourceforge. I'm surprised I didn't find it there.
?
I would love to have another kachina, for parts if nothing else. And maybe I can fix the power issue.
?
I'd be happy to pay shipping and trouble and a bonus if I can make it work ;)
?
Off-list contact via my call at arrl.net. My address in qrz.com is good.
?
thanks again & 73 - Bill N7DZ
Re: QSO today podcast with W1HKJ

 

Hi Bill,

I never included the kcat / kcts control in flrig primarily because the 505DSP requires a bit more attention to I/O than does other transceivers.? The?possible exception being the Paragon.? The current software source is located at =


and at Source Forge:?
  • git clone fldigi-kcat
  • git clone fldigi-kcts
BTW, that Kachina 505 DSP is in an original box in the attic along with a remote vfo knob, 505 TX.? The transceiver had low output power, but otherwise in perfect condition.? Both are available if you are interested and don't mind paying the shipping cost.

73, David


On Sat, Apr 26, 2025 at 3:39?PM Bill, N7DZ via <bill=[email protected]> wrote:
Just stumbled across this podcast with Dave W1HKJ. It was a good listen, I recommend it:
?
Confession: I didn't exactly stumble across it - I was searching for W1HKJ links and it was in the search results - but still it was a good listen.
?
One thing that came up in the interview, from 2015, was that Kachina 505DSP was one of the two rigs Dave said he had at the time. He also talked about flrig. I'm just curious given those two facts why flrig doesn't support the 505DSP, since it seems it was his active rig control effort at the time.
?
No complaints though, kcat, a one rig driver, is a fine 505DSP controller, I use it daily.
?
Which gets me to my last comment, Dave, in case you're reading: is kcat on github, or are you willing to put it there? I occasionally find some small bug and fix it, and I'd like to start a branch for that purpose so my changes don't get lost and have a chance of being rolled up easily at some point. Last time I sent you changes, you graciously rolled them in, but it was a somewhat tedious process. The number is probably small, but there still are a few kcat users and live 505DSP radios.
?
All your fl and other tools are great, thanks so much for them.
?
73 - Bill N7DZ
Re: Teamviewer on Debian Trixie etc.

 

¿ªÔÆÌåÓý

I found Ultra Viewer to work well.? It is free for the basic features.? I run it on Xubuntu and Windows 11.

73, Dave

--
Dave W3EO

Re: Teamviewer on Debian Trixie etc.

 

¿ªÔÆÌåÓý

I found Ultra Viewer to work well.? It is free for the basic features.? I run it on Xubuntu and Windows 11.

73, Dave

--
Dave W3EO

QSO today podcast with W1HKJ

 

Just stumbled across this podcast with Dave W1HKJ. It was a good listen, I recommend it:
?
Confession: I didn't exactly stumble across it - I was searching for W1HKJ links and it was in the search results - but still it was a good listen.
?
One thing that came up in the interview, from 2015, was that Kachina 505DSP was one of the two rigs Dave said he had at the time. He also talked about flrig. I'm just curious given those two facts why flrig doesn't support the 505DSP, since it seems it was his active rig control effort at the time.
?
No complaints though, kcat, a one rig driver, is a fine 505DSP controller, I use it daily.
?
Which gets me to my last comment, Dave, in case you're reading: is kcat on github, or are you willing to put it there? I occasionally find some small bug and fix it, and I'd like to start a branch for that purpose so my changes don't get lost and have a chance of being rolled up easily at some point. Last time I sent you changes, you graciously rolled them in, but it was a somewhat tedious process. The number is probably small, but there still are a few kcat users and live 505DSP radios.
?
All your fl and other tools are great, thanks so much for them.
?
73 - Bill N7DZ
Andy's Ham Radio Linux version 26D has been released!

 


Hi Everybody,

Andy's Ham Radio Linux (AHRL) v26d has been released.? Several software packages were updated (enumerated in the CHANGES file).? Support was added for LMDE6.? For more info and a link to download it: ?

Thanks, and 73,

Andy
KB1OIQ ..
quieting fldigi event log (and stdout/stderr)

 

I'm running fldigi 4.2.06 built from source. If run from the command line, and/or if I look at the ~/.fldigi/debug/status_log.txt, I see a very dense log, including I: and D: messages, even though the default is documented as WARN. Event supplying --debug-level 0 doesn't quiet this. I can quiet it after I start it running by opening the event log from the gui and setting it to quiet.
?
Is debug level being forced to start with debug level logging during development maybe? As is, the log gets very big if I let it run for a long time.
?
Bill N7DZ
Re: Fldigi Wiki Install

 

¿ªÔÆÌåÓý

Thanks David, after I entered q (quit) and ran your command it looks like pavucontrol is now installed with the log below.
That's quite a command :-)
73, Ron NY3J

ny3j@ny3j-Studio-XPS-435T-9000:~/Downloads/fldigi-4.2.06.27$ sudo apt --no-install-recommends install pavucontol
[sudo] password for ny3j:
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
E: Unable to locate package pavucontol
ny3j@ny3j-Studio-XPS-435T-9000:~/Downloads/fldigi-4.2.06.27$ sudo apt --no-install-recommends install pavucontrol
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following additional packages will be installed:
? libatkmm-1.6-1v5 libcairomm-1.0-1v5 libglibmm-2.4-1t64 libgtkmm-3.0-1t64 libpangomm-1.4-1v5
Recommended packages:
? pulseaudio
The following NEW packages will be installed:
? libatkmm-1.6-1v5 libcairomm-1.0-1v5 libglibmm-2.4-1t64 libgtkmm-3.0-1t64 libpangomm-1.4-1v5 pavucontrol
0 upgraded, 6 newly installed, 0 to remove and 5 not upgraded.
Need to get 1,962 kB of archives.
After this operation, 9,741 kB of additional disk space will be used.
Do you want to continue? [Y/n] Y
Get:1 noble/main amd64 libglibmm-2.4-1t64 amd64 2.66.7-1build1 [629 kB]
Get:2 noble/main amd64 libatkmm-1.6-1v5 amd64 2.28.4-1build4 [77.1 kB]
Get:3 noble/main amd64 libcairomm-1.0-1v5 amd64 1.14.5-1build1 [43.9 kB]
Get:4 noble/main amd64 libpangomm-1.4-1v5 amd64 2.46.4-1build3 [52.2 kB]
Get:5 noble/main amd64 libgtkmm-3.0-1t64 amd64 3.24.9-1 [983 kB]
Get:6 noble/universe amd64 pavucontrol amd64 5.0-2build3 [178 kB]
Fetched 1,962 kB in 0s (4,899 kB/s)? ?
Selecting previously unselected package libglibmm-2.4-1t64:amd64.
(Reading database ... 177939 files and directories currently installed.)
Preparing to unpack .../0-libglibmm-2.4-1t64_2.66.7-1build1_amd64.deb ...
Unpacking libglibmm-2.4-1t64:amd64 (2.66.7-1build1) ...
Selecting previously unselected package libatkmm-1.6-1v5:amd64.
Preparing to unpack .../1-libatkmm-1.6-1v5_2.28.4-1build4_amd64.deb ...
Unpacking libatkmm-1.6-1v5:amd64 (2.28.4-1build4) ...
Selecting previously unselected package libcairomm-1.0-1v5:amd64.
Preparing to unpack .../2-libcairomm-1.0-1v5_1.14.5-1build1_amd64.deb ...
Unpacking libcairomm-1.0-1v5:amd64 (1.14.5-1build1) ...
Selecting previously unselected package libpangomm-1.4-1v5:amd64.
Preparing to unpack .../3-libpangomm-1.4-1v5_2.46.4-1build3_amd64.deb ...
Unpacking libpangomm-1.4-1v5:amd64 (2.46.4-1build3) ...
Selecting previously unselected package libgtkmm-3.0-1t64:amd64.
Preparing to unpack .../4-libgtkmm-3.0-1t64_3.24.9-1_amd64.deb ...
Unpacking libgtkmm-3.0-1t64:amd64 (3.24.9-1) ...
Selecting previously unselected package pavucontrol.
Preparing to unpack .../5-pavucontrol_5.0-2build3_amd64.deb ...
Unpacking pavucontrol (5.0-2build3) ...
Setting up libcairomm-1.0-1v5:amd64 (1.14.5-1build1) ...
Setting up libglibmm-2.4-1t64:amd64 (2.66.7-1build1) ...
Setting up libpangomm-1.4-1v5:amd64 (2.46.4-1build3) ...
Setting up libatkmm-1.6-1v5:amd64 (2.28.4-1build4) ...
Setting up libgtkmm-3.0-1t64:amd64 (3.24.9-1) ...
Setting up pavucontrol (5.0-2build3) ...
Processing triggers for libc-bin (2.39-0ubuntu8.4) ...
Processing triggers for man-db (2.12.0-4build2) ...
Processing triggers for desktop-file-utils (0.27-2build1) ...
Processing triggers for gnome-menus (3.36.0-1.1ubuntu3) ...
ny3j@ny3j-Studio-XPS-435T-9000:~/Downloads/fldigi-4.2.06.27$

On 4/24/2025 12:30 PM, David Ranch, KI6ZHD via groups.io wrote:


What does "sudo apt --no-install-recommends install pavucontrol" do?? I have pavucontrol installed on u24.04.2 here so it's definitely possible.

--David
KI6ZHD


On 04/24/2025 09:13 AM, Ron NY3J via groups.io wrote:
Hi All,

I'm trying to follow the Wiki install on my Unbuntu 24.04.2 and I'm getting the following when I try to install pavucontrol. I'm not sure how to continue.

73, Ron NY3J


ny3j@ny3j-Studio-XPS-435T-9000:~/Downloads/fldigi-4.2.06.27$ sudo aptitude install pavucontrol
The following NEW packages will be installed:
? libasound2-plugins{a} libatkmm-1.6-1v5{a} libcairomm-1.0-1v5{a} libglibmm-2.4-1t64{a} libgtkmm-3.0-1t64{a} libpangomm-1.4-1v5{a} pavucontrol pulseaudio{a} pulseaudio-utils{a}
0 packages upgraded, 9 newly installed, 0 to remove and 5 not upgraded.
Need to get 2,995 kB of archives. After unpacking 15.0 MB will be used.
The following packages have unmet dependencies:
?pipewire-audio : Conflicts: pulseaudio but 1:16.1+dfsg1-2ubuntu10.1 is to be installed
????????????????? Conflicts: pulseaudio:i386 but it is not going to be installed
?pipewire-alsa : Conflicts: pulseaudio but 1:16.1+dfsg1-2ubuntu10.1 is to be installed
???????????????? Conflicts: pulseaudio:i386 but it is not going to be installed
The following actions will resolve these dependencies:

???? Keep the following packages at their current version:
1)???? pulseaudio [Not Installed]

???? Leave the following dependencies unresolved:
2)???? pavucontrol recommends pulseaudio



Accept this solution? [Y/n/q/?]







Re: Fldigi Wiki Install

 

¿ªÔÆÌåÓý


What does "sudo apt --no-install-recommends install pavucontrol" do?? I have pavucontrol installed on u24.04.2 here so it's definitely possible.

--David
KI6ZHD


On 04/24/2025 09:13 AM, Ron NY3J via groups.io wrote:

Hi All,

I'm trying to follow the Wiki install on my Unbuntu 24.04.2 and I'm getting the following when I try to install pavucontrol. I'm not sure how to continue.

73, Ron NY3J


ny3j@ny3j-Studio-XPS-435T-9000:~/Downloads/fldigi-4.2.06.27$ sudo aptitude install pavucontrol
The following NEW packages will be installed:
? libasound2-plugins{a} libatkmm-1.6-1v5{a} libcairomm-1.0-1v5{a} libglibmm-2.4-1t64{a} libgtkmm-3.0-1t64{a} libpangomm-1.4-1v5{a} pavucontrol pulseaudio{a} pulseaudio-utils{a}
0 packages upgraded, 9 newly installed, 0 to remove and 5 not upgraded.
Need to get 2,995 kB of archives. After unpacking 15.0 MB will be used.
The following packages have unmet dependencies:
?pipewire-audio : Conflicts: pulseaudio but 1:16.1+dfsg1-2ubuntu10.1 is to be installed
????????????????? Conflicts: pulseaudio:i386 but it is not going to be installed
?pipewire-alsa : Conflicts: pulseaudio but 1:16.1+dfsg1-2ubuntu10.1 is to be installed
???????????????? Conflicts: pulseaudio:i386 but it is not going to be installed
The following actions will resolve these dependencies:

???? Keep the following packages at their current version:
1)???? pulseaudio [Not Installed]

???? Leave the following dependencies unresolved:
2)???? pavucontrol recommends pulseaudio



Accept this solution? [Y/n/q/?]






Fldigi Wiki Install

 

Hi All,

I'm trying to follow the Wiki install on my Unbuntu 24.04.2 and I'm getting the following when I try to install pavucontrol. I'm not sure how to continue.

73, Ron NY3J


ny3j@ny3j-Studio-XPS-435T-9000:~/Downloads/fldigi-4.2.06.27$ sudo aptitude install pavucontrol
The following NEW packages will be installed:
? libasound2-plugins{a} libatkmm-1.6-1v5{a} libcairomm-1.0-1v5{a} libglibmm-2.4-1t64{a} libgtkmm-3.0-1t64{a} libpangomm-1.4-1v5{a} pavucontrol pulseaudio{a} pulseaudio-utils{a}
0 packages upgraded, 9 newly installed, 0 to remove and 5 not upgraded.
Need to get 2,995 kB of archives. After unpacking 15.0 MB will be used.
The following packages have unmet dependencies:
?pipewire-audio : Conflicts: pulseaudio but 1:16.1+dfsg1-2ubuntu10.1 is to be installed
????????????????? Conflicts: pulseaudio:i386 but it is not going to be installed
?pipewire-alsa : Conflicts: pulseaudio but 1:16.1+dfsg1-2ubuntu10.1 is to be installed
???????????????? Conflicts: pulseaudio:i386 but it is not going to be installed
The following actions will resolve these dependencies:

???? Keep the following packages at their current version:
1)???? pulseaudio [Not Installed]

???? Leave the following dependencies unresolved:
2)???? pavucontrol recommends pulseaudio



Accept this solution? [Y/n/q/?]
Re: Teamviewer on Debian Trixie etc.

 

I found a website on the Linux Mint group that set up?an X11 server on my portable machine. I'm able to log in via VNC. Do you think I can find it on my 75-year-old brain?

73

Don Poaps
New Westminster, BC
VA7DGP DATA
VA7QU ? VOICE


Winlink:?va7dgp@...
Subject://wl2k ? ? ? ? ?

ALLSTAR ?530780
Hamshack Hotline
5971
Mid-Island Phone Mesh
2210
2232

? ? ? ? ? ? ? ? ? ?


On Thu, Apr 24, 2025 at 5:40?AM Rick KD8WCK via <rademattia=[email protected]> wrote:
I concur with Neil. When I installed Teamviewer on Ubuntu I was horrified at the background processes that it installed silently. It took hours to remove all the garbage.

I would not recommend Teamviewer on any platform.






--
Don Poaps
VA7DGP: data
VA7QU:? ?voice
Re: Teamviewer on Debian Trixie etc.

 

I concur with Neil. When I installed Teamviewer on Ubuntu I was horrified at the background processes that it installed silently. It took hours to remove all the garbage.

I would not recommend Teamviewer on any platform.
21 - 40 of 53995