Re: Haul out capability on east cost for 2017 Lagoon 42
There is this attached?list from 2017. Not sure if it is complete. - Brett -- ? ( http://www.lifeinthekeyofsea.com/ ) Brett Biba ? Captain | Key of Sea?| 2007 Lagoon 380 S2(#411)?| US East Coast
By
Brett
·
#26037
·
|
Re: Haul out capability on east cost for 2017 Lagoon 42
If you get to New England, Hinckley in Middletown, RI, ?Essex Boat Yard, Essex CT, Newport Ship Yard, Newport.
By
Vin Ratford <vratford@...>
·
#26036
·
|
Re: Lagoon 380 S2 Replacement Sails
Frank, the sailwarehouse.com has 5 new mainsails with alittle modifications will fit your boat made by pro/stock. Just FYI. I purchased a new mainsail for my boat and modified it for alot less. I
By
Kevin Darden
·
#26035
·
|
Varnish 380 s2 premium tables (2008)
#380s2
Hi? does anyone know what kind of varnish has been used on the 380 S2 (2008) tables? We want to renew the varnish, and the expert at the chandlery said that a 2 component varnish would be better, but
By
Martin Eckhardt
·
#26034
·
|
Re: Haul out capability on east cost for 2017 Lagoon 42
Port Annapolis in Annapolis claims they can do 26 feet.
By
Harry Keith
·
#26033
·
|
Re: Haul out capability on east cost for 2017 Lagoon 42
I have hauled my 42 several times at Bradford Marine in Freeport Bahamas. Very helpful. They can also do hurricane hual and tiedown. David Bond Shaken not Stern
By
Dave Bond
·
#26032
·
|
Re: Lagoon 380 S2 Replacement Sails
Many thanks for the advice. I am going for tri-radial cut on both sails. Square top main using the simple Lagoon system for controlling the top of the sail when raising and lowering. Now for
By
Frank NZ
·
#26031
·
|
Haul out capability on east cost for 2017 Lagoon 42
Has anyone else run into this problem on the east coast finding a marine service center that can haul out the new 42 with 25.5 beam? I hauled out last year at St. Augustine Marine Center Florida as
By
SunnySkye
·
#26030
·
|
Re: Hatch bug screen
There are off the shelf Sunbrella hatch covers by Oceansouth ? https://www.chsmith.com.au/Products/Oceansouth-Hatch-Covers.html To prevent them blowing away, I have sewn a short length of cord to
By
Brett Phoebe
·
#26029
·
|
Re: Hatch bug screen
Ok thank you.? Any interior bug screens you might be aware of for L 400 ?
By
Marcus
·
#26028
·
|
Re: Hatch bug screen
This was on a previous post. "I don't know where you are, but I priced around and found Ahoy Captain to have the best prices. http://www.ahoycaptain.com/oceanair_sfs.html " Arlene L400
By
Arlene Huber
·
#26027
·
|
Re: Hatch bug screen
Marcus to the best of my knowledge there are no Sunbrella Hatch covers available. I had some made for our 410 and my wife has made a few that flew away. I¡¯ll mention I have several interior Lewmar
By
Steve Dolan
·
#26026
·
|
Re: Hatch bug screen
ok,? now how about hatch covers for a L 400.? thanks...
By
Marcus
·
#26025
·
|
Re: Hatch bug screen
Thanks brett!! Very helpful exactly what i was looking for.
By
Jim Booth
·
#26024
·
|
Re: Hatch bug screen
Hi Jim, I know there were a couple of iterations. On our 2007 380 S2 #411, most of out hatches have 8 rotating tabs to?hold the screens in place. Size 30(Lewmar part #396309937) covers the 4 cabin
By
Brett
·
#26023
·
|
Re: Hatch bug screen
Easy- Lagoon accessories in France Enviado desde mi iPhone
By
helidi2000@...
·
#26022
·
|
Hatch bug screen
Anyone know where i can get replace hatch mosquito screens for? 380 hatches? Jim booth Sv moondance currently in marathon fl 380 s2
By
Jim Booth
·
#26021
·
|
Re: Lagoon 380 S2 Replacement Sails
Most material have directional strength, much like Dacron/woven family. By using radialcut to better orient the cloth, in small panels, along the best loadpath for the sail, a lighter material can be
By
David Godin
·
#26020
·
Edited
|
Re: Lagoon 380 S2 Replacement Sails
Cross cut vs radial cut has to do with the properties of the material. Dacron should always be cross cut since it stretches more in one direction vs the other. Radial cut Dacron does not hold it's
By
nigiil
·
#26019
·
|
Re: Lagoon 380 S2 Replacement Sails
Hi Frank, I¡¯m no sailmaker and others will have different opinions obviously . I guess budget is the key factor. Dacron is a proven material, commonly available and easy to repaire with needle and
By
David Godin
·
#26018
·
|