开云体育

I agree. The only cable you need is a PTT. That is all I used. It's a good life, Craig Turner W?LV Sent: Sunday, January 26, 2025 8:17 AM To: [email protected] Subject: Re: [la1k] Flex to amp

You really don't need a cable, the LA-1K is RF sensing and will follow band changes.? Billy Parkinson KG5RQZ WRYA510 HH 11724 COR RACES 306

I can't seem to find instructions for creating a Flex to LA-1K amplifier.? Anyone have one and can send instructions to build one? Thanks... Bob KK8ZZ

It's a good life, Craig Turner W?LV Pahrump, NV Sent: Friday, December 20, 2024 10:38 AM To: [email protected] Subject: Re: [la1k] Palstar LA-1K and Heavy Duty Cycle Activity Guys I love the

I just developed a problem for some unknown reason. Every band every transmission when I unkey thr LA-1k will remain in transmit and kills my receive of course. SWR 1.2 and display shows TX AMP but no

Ok Very good! TNX for thinking about it. I am really bummed, not about the AMP. Its amazing, but about the fact that my Barrett wont drive it correctly. I know? I could work around it, but I was

Barry (VE6UM): Thank you for the RTTY application information. Gud to see the amp serves you well during contest activity.? Your response is most appreciated Barry. 73 Bill K KC2VUT All Gave

Don (Kt3V) Thank you, Don, for the ICAS and CCS rating information.? And great to know about the Gas discharge possible issues. Most appreciated Don. 73 Bill K KC2VUT All Gave Some Some Gave All

Craig: (cturner) Thank you for the response to my inquiry. F/B running FT8. Your response is most appreciated. 73 Bill K KC2VUT All Gave Some Some Gave All

Art:? (W1SWL) Thank you for the helpful information. Most appreciated. Good luck with the RF-2K-S amp. 73 Bill K KC2VUT All Gave Some Some Gave All

I had the LA-1K for about 2 years. ?It ran great with my 101MP. ?It was paired with the HF-AUTO tuner. The 1K is a solid performer for sure. I fashioned a cable from the 101MP to the LA-1K to inform

Guys I love the amp also. Run FT8 mostly with it and try to stay below 63C, so up and down on the input. 15w in gives me about 350w out, also running 220v. Running the amp into the Palstar Auto

It is my understanding from PalStar that the ICAS power rating is 1kw while the CCS rating is about 225W. CCS is continuous 24/7. Mine sits in a shelf with an exhaust fan in the back. Works fine

Pete: Thank you for the offer. Gonna continue with considering a purchase with warranty. Most of the shack is boat anchors would like to upgrade with new equipment if I can afford it. Best Regards

Ok I will just do the work and a sell the LA-1K through my regular channels. Thought I could kill two birds with one stone. PM

Barry: Thank you for the swift response! The information you and others provided has helped to reinforce my decision to consider the LA-1k as an addition to my shack. Like you I will provide 220V for

Pete Marsh From: sierrahoteldog@... To: barplo@... Thu, Dec 19 at 9:43 PM Hi Bill, I have a brand new LA-1K that I would be willing to part with. I have had it a few months, and It does

Hi Bill. I run mine around 700w on rtty during contests without any problem. Been a rock solid performer for me. The highest temp it’s gotten to is 68C, then I back off a bit with the drive and TX,

I am currently considering the purchase of a LA-1k amplifier to support my Kenwood TL-921 which does not cover 6 Meter. Can anyone provide me with any experience with the LA-1K and heavy duty cycle

David, I have experienced a problem with a failed power output device that allegedly was due to improper torquing of the device to the heat sink. Palstar replaced the failed power device for free and