开云体育

It is the band data line, but when it tunes for cetatin frequencies, it does not trigger the amp output. It sends power to the radio at the input rate, or around 25-30W without any assistance from

My thoughts exactly Kent. I use the band data line and it has worked perfectly on all band switching. Best, Bob, W3RJP *Robert J. Pegritz* P.O. Box

Stephan ... By "auto-band change" do you mean band changing by RF sensing or by band-data line? Kent K9ZTV

Hi Stephan, Are you using that data cable that goes from your transceiver to the amp? Best wishes, Bob, W3RJP *Robert J.

I took delivery a couple weeks ago of a new LA 1K amp from Palstar. As the title says it was delivered with firmware 1.09E. The latest firmware available for download on the Palstar website is

I have used the LA-1K for some time now, basically on MARS frequencies outside of the HAM Bands, including the 60-meter band. Lately I have had issues with the LA-1K not using the correct band (not

Points well taken, David, AF6HO.? Lol.. Forget about the LA-1K, I use my Elecraft KX2 as a QRP exciter to operate on 5346.5 kHz USB with my Elecraft KPA1500 set to Band 5; staying well within the

Not all countries have those same power restrictions. [email protected]> wrote:

Don't take this the wrong way Ray, but given the response is you shouldn't be using the LA-1K at all on those bands due to legal limits - 100W on 60m and 200W on 30m - I don't see any value of your

Except for one person who likes to complain about everything, you will find most owners are quite happy with their LA-1K.? I initially had one issue where the thermal paste under the final was put on

Kent, K9ZTV, so glad you mentioned "Firmware 1.08S" in your post.? I'm still looking forward to use the "PROGRAM UPDATES" port located in the front panel of my LA-1K. Rick, VE3PP, pleased be advised

You are correct sir. Barry VE6UM Sent: April 20, 2024 4:57 PM To: [email protected] Subject: [la1k] NOT MANY POSTS I've come to the conclusion that the LA-1K must be a damn good amp due to

It is. I’ve had mines since 2017 and not one hiccup! Sloan

The Best amp ever!

They are! Proud owner LA-1K. 73, W6RRS

There were more posts in the past, but Firmware 1.08S is quite stable and has apparently fixed earlier issues. I use mine nightly at full output on CW traffic nets in Direct Keying mode, with full

I've come to the conclusion that the LA-1K must be a damn good amp due to the fact there are not many posts in this group!

Are you plugged into 240 or 120. That will make a difference. On 120v w/16w driveI get 450w out, 20w drive I get 600w out

In accordance with your 14-Dec-2023 post /g/la1k/message/1488 the LA-1K in question started to work just fine, after you found the PTT phone plug on your transceiver came undone when

Are those numbers into a dummy load, or are they into an antenna load? Kent K9ZTV