开云体育

Happy Thanksgiving Kent, On page 15 of the currently available LA-1K Technical Manual https://www.palstar.com/en/product-manuals/manual_la-1k.pdf it states in part,?under the "POWER SUPPLY

A few more things to remember: the steady state rating of a circuit breaker or nominal load is 80% (16A for a 20A circuit, the ICAS rating for the la1k is about 1kw output, the CCS rating is about

The concern is with the current draw, as Jerry Webb clearly and accurately posted. According to the manual, at 120 VAC the maximum current draw for the LA-1K is 33 amps. It is false security to

Hey Fritz,first off Happy Thanksgiving from Canada! Second, those output numbers look pretty good to me, Honestly I never ran more than 700 or 800 with my old AL-80A so I doubt I would drive the amp

I have a 20A ~120V circuit with a single outlet for my LA-1K. These are the amp's drive and output numbers into a dummy load. 5 in => ~150 out 10 in => ~270 out 15 in => ~400 out 20 in => ~500

Rick ... Here in the USA some homeowner policies exclude coverage for work done by non-licensed electricians. 73, Kent K9ZTV

Hi Jerry Well to be honest I do not plan on running the amp at 1000 PEP. 600-700 is more than enough for my use. My old AL-80A ran just fine on the dedicated 120 V circuit, but at full output it

Hi Rick: My LA-1K has the Auto-Sensing power supply and does NOT have the 120/240VAC switch to select.? The label on my LA-1K rear panel (below the AC input receptacle) states "20AMPS at 120VAC.

Happy Thanksgiving, Ric. And join us on 1900 kHz. Monday-Friday at 8:30 PM Eastern time!!!! We'll listen for that BIG signal. Best to you, Bob *Robert

Thanks Bob that is good to know. And yes I will check that switch! I will likely get a 220 run into the shack after I get the amp. Just need to pick up the 10/2 wire and outlet receptacle. To those

Hi Rick, I have that exact setup in my shack. But remember to slide the switch located on the SIDE of the LA1K to 110. Usually when delivered, the switch is indicating 220, so it's

Hi Rick My LA-1K is powered by 120V. I use the Icom IC-7300 with about 25 to 30 Watts output for SSB and get around 400 to 500 Watts out. 73, Claus (AE0S)

Rick, I drive my LA-1K from the Icom 7610 with no more than 45 watts or less (depending on the band) and output is approximately 1000 watts.? The LA-1K is a fantastic solid state amp.? Enjoy!

There is no issue running the LA-1K with 120v.? I ran my amp on 120v for the first week until I was able to run a dedicated 240v line to my amp.? It works well on 120v but really performs on 240v.?

Hello Everyone I will be picking up my new LA-1K sometime early in December. A few questions for current owners. I presently have a dedicated 120 V line into my shack, with a 15 amp breaker. For

Hello Everyone I am going to order a LA-1K today. First solid state amp for me. I am curious as to the various drive power that is required with this amp. For example 25 watts drive, what is the

Hello Jim, Looking at your QRZ page https://www.qrz.com/db/KX2T?aliasFrom=KE2TR and my QRZ page https://www.qrz.com/db/kj5mi I see that we are currently both using the Yaesu FTDX101D as the

The amp works without issue, really like having a 1Kw radio on hand plus instant band changing with a cat cable. Nice that 40 watts drives it to a kilowatt.

Hey Fred, when searching for a schematic drawing package for the LA-1K, I came across John Whitt's webpage (AI4FR) where he has a detailed account of *numerous serious issues* relating to his brand

Hi David - This DX Engineeering link https://static.dxengineering.com/global/images/technicalarticles/pas-la-1k_zz.pdf will take you to a review of the LA-1K by Dr. Terry G. Glagowski, W1TR,