开云体育

Look at the properties of the connectors on board that you have laid out. That will tell you the x and y values. Use those values to position the connectors on the other board, (just enter them into

Hi all, I have 2 boards with 2 pin headers and pin aockets, which should plug together. How can I transfer the position of the connectors from one layout to the other one? Last ressort would be to

Also... I have not idea what controller you use, but usually R2 (and R3) have capacitors connected in parallel. Check your calculations.

Good design practice - name critical nets with own name (e.g. FB)

Hi Sándor It seems like you have the resistors meet end-to-end and have the wire connect in the meeting point. I am not sure that works. What happens if you include a small piece of wire between the

Hi, I have a problem. I have switched from kicad 6 to kicad 7. [image: image.png] I have discovered a problem with the netclass. In the schematic the kicad have add name to the track (NET-(U1-VOUT/FB)

Thank you very much. ====================================================================================== Best wishes John Woodgate OOO-Own Opinions Only www.woodjohn.uk Rayleigh, Essex UK I hear,

Make sure you are putting the pins the right way around. The circle goes to the outside of the box. So for pins on the left side of the box, set the orientation to "right". That is not intuitive to me

Thanks, Mike. I don't have any old libraries. ====================================================================================== Best wishes John Woodgate OOO-Own Opinions Only www.woodjohn.uk

Not quite out of the wood, though. I couldn't get the pin names to appear inside the symbol, even though I checked carefully that the option was ticked. I've overcome the problem by deleting the pin

After carefully reading the on-line Help, I have created a new symbol for the AD736. Thank you all for your help. ======================================================================================

Also see this thread. If you have old libraries and have not migrated them they are read only: https://forum.kicad.info/t/personal-library-not-writable/33671/4 -- Mike M

Thanks again, Steven. I will study. ====================================================================================== Best wishes John Woodgate OOO-Own Opinions Only www.woodjohn.uk Rayleigh,

One thing that might cause that is the "snap grid". I.e. if you have a very large grid set, then you won't be able to move things in small increments. But it is definitely easy to move everything.

Thanks, Steven. I think I've got that far, but I'm still in deep trouble.If I try to make a new symbol, I get? 'AD736' superimposed on 'U' in large immovable letters, right where I want to put the

Take a look at this thread on kicad.info On first use KiCad creates the C:\Users\User\Documents\KiCad\6.0 folder - Software - KiCad.info Forums

One other point - if you create a new library from within the schematic editor, it will give you a choice of "Global" or "Project". If you choose "Global" it should again put the library into a path

The screenshot came through. Thank you. I have found the folder \Documents\KiCad\6.0. All its sub-folders are empty.? I downloaded the Schematic Editor 6.0 English Documentation KiCad.htm, but I

Yes - that doesn't make a lot of sense. As soon as you click "New Library" in the symbol editor, you should get a dialog to save it, and that dialog should show the path. I'll try to attach a screen

Admin rights usually allow writing to app folders in Program files, but of course that's not guaranteed, and in any case is dangerous. But it's odd that I can create a library but not write to it!