开云体育

Steve, Tried your suggestion with no effect.? I noticed that, before the panel loads, there is a message that "WebSockets are disabled"; is that what your suggestion was hoped to overcome or is it a

Steve: First off, your contributions to JMRI via Engine Driver are extraordinary and to be commended.?? I use the Engine Driver app regularly and find it more than satisfactory for use on my

Klaus, thank you! This helps a lot!!! This is the nugget that was eluding me: int value = ( int ) Math. ceil((steps - 1 ) * speed); I think for the purpose I'm trying to achieve, I can set the

Luis, I can't seem to see your email address. Can you email me directly at akersp62@... and I will show you what you need to do. thanks again Peter (Brisbane Australia)

Dear Klaus, Many thanks. I've already had a quick look through the code but I will have a deeper look. Thanks to you I've now can set the speed step type of the DCC to 28 while using

Steve, Thank you for your comments, which I have just read after taking a more detailed look at what works and what does not - and now I need to recharge the tablet's battery.? Once that is done I

Am 22.07.2018 um 11:31 schrieb nicholas murphy via Groups.Io: Here might be the appropriate Java code: https://github.com/JMRI/JMRI/blob/master/java/src/jmri/jmrix/AbstractThrottle.java#L1428 Klaus

Hi Erich, I'm not a JMRI designer and I haven't picked through the Java code to see how it translates the floating value 0 to 1 into DCC speed steps. Could you not just pick a floating value in the

Hi,? We would be very grateful for your assistance. I will send you some instructions shortly.? Peter? (Brisbane Australia)

Hi Peter. I volunteer to translate into Catalan and Spanish, I am currently doing the translation into Catalan of JMRI. I have no idea how to translate it, any advice will be welcome? Luis Zamora

Hi Harold, Most likely, your problem is that your tablet uses an older version of WebView that does not support the WebSocket protocol. All that EngineDriver does is use the device's builtin web

I am running Engine Driver on a Wikipad for which the up to date operating system is Android 4.2.2.? I have the tablet set up so that, in portrate mode, I see the throttles and, in landscape mode, I

Problem solved. After a recent WIN10 maintenance (ugh!!!) it "lost" the LocoBuffer-USB, so I had to reinstall it. What I failed to notice at the time was that WIN had changed the port # from what was

Thank you Craig I will try that.

Graham, To set the maximum speed for a particular section: 1) click on the Edit button in the transit table 2) when the sections for the transit are shown, press the "View/Add/Edit Action" button for

Thank you Roger

Glad you liked it. I've got a bit more footage to share when I get a Round Tuit! Thanks Kev for the info. Would be great to hear more detail of the methods used, are you planning on posting to the

Graham, I'm not an expert on this Dispatcher, but I think it is the signals that control speed.? Find a block that has a signal and set that block to slow to see if that works. Roger

Jon, ? ? ?Chrome should not be the problem.? I have Chrome and Windows 10.?? ? ? ?Is you computer set up for other users? Roger

Good morning Roger,?? I clicked run anyway and it started to install JMRI and gave me the folowing warning: Error opening file for writing: C:\Program Files (x86)\JMRI\LaunchJMRIexe. Click Abort to