开云体育

Iain, Going off the deep end, think about this solution: A Route table entry has the ability to set a sensor state when the turnouts have reached the desired state. The could be used to trigger the

Cracked it!!! I assumed I was supposed to change the turnout state in the Logix, which certainly worked on the physical light.? Now changed to the Signal Mast Aspect and everything is now hunky

I have an understanding problem.? It has been clarified to me (and the manual does say it!) that Logix actions are NOT necessarily performed in a strict order, and will be executed "as convenient".

I picked up a couple of good tips from the video, thanks - in particular the Trigger Calculation switch, which has solved my No 3 problem - how to allow for changing states when triggering the

Thank You!!! Dave, I had read the AIU directions wrong, I have the switches backwards. It worked!! According to their diagram I thought “on” was away from the leds. So once I get back in town

Your answers are below: The first two have easy answers. If you get "Found mfg 123 (Masoth Electronic, GMBH) version 123; no such decoder defined.", and/or all CVs return a value of 123 and long

Hello- Not the most complex questions, but I cannot find answers to this anywhere. I have a Pi-SPROG and it returns 123 for almost every CV I read on any Locomotive/device. This CVs are right on my

Greetings, I have installed JMRI 4.14.4 on my main computer running OpenJDK 11.0.1 and all is running fine. I have been using this computer for JMRI for several years.? I'm building a new computer

Hi Steve I haven't come across the video so will check it out. It's most likely that it is the Signal Mast Logic table that I haven't understood regarding feathers Thanks Torben

Hi Torben, If any of the conditional sensors to the logix are unknown, then it won't be able to calculate so worth checking the appearance in the Signal Mast Logic table, then in sensor table for any

David, Thank you very much.? What you suggest is achievable, but not using SP1a as it is used in many places and may be set in many instances (it is a part of a station platform - so a lot of

Matt: There is a difference in the two... Kernel on the early MCII is the same as you show. However the second is different with a #154 not #105. Build also has a difference 20160517 not 20150526.

Iain, After further review, it appears that things are working exactly as expected. As I mentioned before, each Action is performed in sequence with delayed Actions queued. From a Logix processing

Thanks - code in and working - I'll do some testing over the weekend and let you know how it has gone. It's a steep learning curve for me at the moment soI really appreciate all your help.

David,? Sorry the two early signals are 36 and 38!? Don't think that matters really but it does now tie up with the NCE output! Iain

David, Thank you.? Browse as requested - another thing I didn't know about!? Comments in square brackets - this is the same as the NCE Command Monitor output I put in the last message.

Iain, The Select menu for a Logix contains a Browse option under the Edit option. This will display the Logix in a separate window. The text in the window can be selected and copied. If you post the

Well, as we're " spot the 'givens and druthers' of the ideas" .... Car inventory can have a picture on it like the "media loco roster" for Decoder-pro ? Adding columns can be great so one can add

Thanks Ken Sticking to the numbering of my points 2. I've tried Start of Day to the relevant board, with both 'No Action' or 'Saved Position' - with no success - still the red X on switch on 3. Re the

Dave, Thank ycallinou very much for persevering with me.? Where I am at is as follows - I cannot find how to print out a Logix as you have so you will have to take my words for this.? The times are