开云体育

I also discovered an existing bug in IdentifyDecoder that kicked in when there was a retry. I've fixed that as well and written more tests. All takes time for a senior citizen... -- Dave in Australia

Trying to look at the big picture here. Putting JMRI aside for the moment Surely this is a much better way of sending commands to trains via the rails instead of the current DCC protocol? Andy ---

Code done. Just doing the JavaDoc today and checking SpotBugs CI tests etc. But I doubt it will make it into the V4.14 production release. We're trying to stabilise the code for that now and it will

Iain, Thanks for the confirmation of the process. Dave Sand

Hi Don, When you write "Nine show up in JMRI PANELPRO", where exactly do you see them in the program? What version of JMRI are you running, what OS and what LocoNet hardware connection between the

Thanks Dave - worked a treat.? Got just what I wanted.? Since I use Win10 I find that Paint 3D does everything needed including maintaining a transparent background.

Hi, I have seen a similar problem with Pi-SPROGs connected to the R-Pi which I thought were fixed in 4.12, with some workarounds which are listed in the release notes. I have not been aware of it

Felice, Is your decoder identified by JMRI as an Atlas (CV8=127) or an NCE (CV8=11) ? What is the value you read in CV7 (version number)? Atlas are branding the decoders by asking the manufacturers to

Thanks very much.? That was all clear and straightforward - so I'll set about doing it! I'll move the standard files from the JMRI location to the user location first just to make sure I have it

Walt, Is this decoder per chance manufactured by Lenz for Bachmann? Many Lenz, and Lenz manufactured OEM decoders don’t always create the ‘ACK’ response when used with certain command station

Iain, The signal mast icon locations are specified in the appearance xml file for each signal mast type. The appearance xml files are located at "program:xml/signals/<signal system>/" where

For Ken, here is most of the Sys Console listing so you can see the exact JMRI version in use 018-12-10 17:16:22,107 apps.Apps? ? ? ? ? ? ? ? ? ? ? ? ? ? ?INFO? - PanelPro version

The length of wire between the command station and the program track is entirely immaterial when working out whether a program track booster is needed. If the decoder does readback, but cannot trigger

Looking through the Wikipedia page referenced earlier in this thread, it seems to me there are a couple of links in the references that may provide a starting point for what the messages should be.

Hi all; I'm the one who did this very simple mqtt addition to JMRI, quite happy to see such enthousiasm, yes topic is hardcoded, really that was for fun. I just uploaded my Python turnout mqtt client

Howdy Clay.? I don't know much about signaling (although I have developed panels using Signal Heads using SSL with manual triggering of sensors), but without a dispatcher, why would you need to know

Yes the topic can be changed for the nodes. There is really no off the shelf equipment for layout control using MQTT that I know of. I would expect anyone using MQTT for layout control would be

I don't have the answer for this situation specifically, but what is a good general strategy to identify a decoder in Decoder Pro if you get several options?? I've purchases a few locos on ebay with

Phil, Thank you for the response. I use Digitrax BXP88's for detection and Se8c for signaling. I have multiple blocks with detection and the turnouts used for passing sidings are a separate block as

Paul T, Does the icon selector at least show the second tree? This would mean it found the starting 'resources\icons' in the user space. Just to make sure of where it thinks what is, please do this: