开云体育

Evening, I am running 4.15.6 on one laptop and viewing various functions on a tablet attached to the layout. This evening, I attempted to load up the cars table to inventory and received the

Jan, Sorry, forgot that. Yes. Correct. Dave in Australia

PS: Forgot to mention - duplicating roster entries works flawlessly now.

Thanks Dave. That did it. All sorted now. There was indeed a "roster" in the path for the Roster location which obviously resulted in creating the nesting when I was setting things up long ago. The

It sounds like you don’t have a printer attached to your RPi. It might be easier to run another copy of JMRI on another computer and print the roster from there; you just have to move (or file

Rizwan, You can't set the address of your DS51K1 in Programmer mode. You must be in Command Station mode with power on. That's not a problem. The majority of stationary decoders don't suppor

Jan, Sharing via Dropbox is fine, lots of us do it: <http://jmri.org/help/en/html/setup/Dropbox.shtml> The Roster Location needs to be at the level above (i.e. containing) the "roster" folder. I'd

I have been using it since you posted it on https://github.com/JMRI/JMRI/issues. I now can Identify a decoder?on the programming track?that is on the roster. I now can read a decoder and add it to

Rizwan, In looking at the pictures again I find that the photo of the turnout from the top with the yellow wire is in the straight position but the photo of the wiring on the bottom, the turnout has

interesting - - -a NCE accessory for example, can be configured to look like a loco to the network bus when tied to the rails. As well as an accessory decoder ( when on the throttle bus) The

Thanks for more replies guys. Jim Exler, Thanks for looking at the wiring and identifying a problem. I changed the yellow wire to connect to the outside rail of the straight track (with the turnout

There appear to be some issues with printing. When printing a roster, it appears to make a postscript file (ps) In another case, printing of the roster (to file) creates a pm file...something to do

Thanks Dave. I had never used the JMRI Console so had to study documentation to even find it. It showed that the roster entry file I want to copy could not be found. This surprises me because the

Fraser, Try this xml file: /g/jmriusers/files/ProblemsBeingWorkedOn/dsand/37%20Heaven%20DS.xml This file has a LRoute and Routes to initialize the sensors and turnouts during

The printed report and the export to CSV are totally inadequate.? They don't show any of the selectable options for the trains such as load, car types, etc.

I hope this is now fixed. If you’d like to check, there are installers are http://builds.jmri.org/jenkins/job/Development/job/Packages/ Bob

Hi Dave Thanks for your response. I have downloaded and installed 4.15.6 and have followed your instructions. Unfortunately I still seem to be having the same problem of all the signals along a route

Hello, I am new to this group and JMRI and have come across the following issue: On Ubuntu 18.04/ JMRI 4.14 CV 349 (function key braking rate) does not appear in the CVs pane (or any other pane) for

Rizimine, In looking at your picture of the wiring at the bottom and comparing it with the one of the yellow wire connected for programming, I think your problem is you are connecting the yellow wire

Leo, You can turn on Function Refresh in setup command station. Other possibilities are incorrect Function Map settings, or loco set to 14 step mode (CV29). Dave in Australia