开云体育

ChrisR: I'd still like to know the decoder involved. I've looked in several manufacturer's technical manuals and not found "cutoff" associated with BEMF. In any case, if it is low speed you are

Java does not have a DoEvents call. I have done some programming in Visual Basic so I know what you mean, but Java doesn't support that. What could be added is some sort of progress bar, showing how

This site may be helpful to you: https://sites.google.com/site/markgurries/dcc-welcome-page/advanced-topics/decoder-motor-drive/back-emf-bemf -- Peter Ulvestad JMRI Users Group Moderator (

**tl;dr: What is the configuration of JMRI to connect to a Standalone Loconet via [Bluetooth-Interface](http://www.mollehem.se/index.php/en/loconet-components/electronic/smartphoninterface-detail) for

Thanks Dan. For some reason I had not allowed for 'ore cars' back in to the staging track that the Ore Train returns to. Ticked the boxes to allow for this and the Build Report now allows for the 2

Thank you Dave, You have taken so much time, and i’m sure, expended pot loads of patience in identifying my problem. I will now spend time in reproducing my track plan directly in Panel Pro .xml

Dave, Since it appears not to be stable and risks resources not being properly initialized, and since an automatic load has a predetermined file path (and unlike a situation where the user may change

Os there any way we can modify the code to allow for system update while reading a CV? in Visual Basic we had a command called DoEvents. *DoEvents* passes control to the operating system. Control is

ChrisR: Control of BEMF is different for different manufacturers. What brand of decoder are you using? Mark Granville

Hi all. WRT the latest inquires: * As per my initial post, the only Java on my computer was the Azul version so the Java.com Removal tool was not required as no Java.com product had ever been

/g/jmriusers/topics -- Peter Ulvestad JMRI Users Group Moderator ( https://www.jmri.org ) Tam Valley Group Moderator ( https://tamvalleydepot.com/ ) Sprog-DCC Group Moderator (

How BEMF works or is controlled is decoder dependent. You need to read the manuals for those decoders. Not really a JMRI issue. -- Peter Ulvestad JMRI Users Group Moderator ( https://www.jmri.org

Hi Folks, I'm reading up on BEMF/BEMF cutoff and am still a bit confused. I'm interested in having a switcher locomotive have better slow speed operation. I looked at Decoder Pro and the BEMF cutoff

Tom/Frank, I also allow additional length when setting up my spurs, only 5' extra per car, but when some other club member adds a car that is 57', even an additional 10' will not provide enough room

This is interesting.? I just measure my spurs and put the result in JMRI.? JMRI does take coupler lengths into account when determining the length of rolling stock. -- Tom

Brian, If I'm following, * the Interchange Spur is in the same location (town A) as the classification tracks, and allows the Thru Manifest to Pick up and Set out. * The Thru train's route had

Richard, The If statement is getting the current value from the JMRI Blocks table for block "block one" and seeing if that value matches "T1234". If so, any actions in "Then" are executed. If not,

David, You posted a while back the following code in order to be able to read the "value" of a given block. I know 1: LogixNG: IQ:AUTO:0002 2: ConditionalNG: IQC:AUTO:0002 3: ! A 4: If Then Else.

Gil, Retaining the chooser from an automatic load makes it easy to do a store. Dave Sand

Bob J Thanks so much for your advice on the baud rate. Mike reports the CMRI signals are working now Bob Bucklew