开云体育

Thank you for the reply, I’ll have to try these options. Thank you, Jasen

Hello Jasen, A feature to populate the VSDecoder Manager window with VSDecoders is not implemented. If you want to stay with the graphical user interface of the VSDecoder Manager, you have to take ...

Great! I’ll take a look and see if this works for me. Jasen

Thank you Dave, I'll be trying your methods today. Charley

So exactly which files from the PC do I need to copy over to User/username/JMRI/ ???

Hi, dunno why the PR3 lost its driver -- I had set it up from the CD supplied, and have done it again. Now: 019-10-29 13:09:56,989 apps.Apps????????????????????????????

Dan, I add script buttons to the PanelPro main window, and allow the web server to show that window. Works great for me. Steps: Edit, Preferences, Start Up, Add, Add script to button..., enter Button

Hello, I have recently started to try the VSD.? I was looking for a "save" function for the VSD Manager.? Whenever it is opened it starts blank.? I read some of this post and was wondering if the

Jasen, You can control which turnouts are included by the WiThrottle Server via the WiThrottle -> Routes & Turnouts option. --SteveT

Hello again, Part #2,? I have 2 physical right- handed ( *RH* ) that meet at the turnouts and I use them as a right-handed single crossover ( *RH Xover* ).? I had them on my panel originally as

Hello all, I have two questions about turnout behavior.? This will be part #1 and I'll make a second post for part #2.? I have a right- handed ( *RH* )-TO01 and left-handed ( *LH* )-TO09 set of

John, If you had two connections to the same device, that would cause the COM3 in use message. You should delete one or other of the connections (rather than just disabling it). That indicates the

Dan K, My way to handle that is using Lroutes. For much of the testing the route part can do the needed job. It can be triggered by a sensor or turnout change of state. Adding script execution is easy

Thanks for the criticisms. I am no JMRI expert... I set up a new connection. (Had to disable the previous connection, otherwise COM3 was "in use".).? Now all "Default" connections are Loconet and

One simple way to achieve the result is to use an Internal Sensor to trigger the script. Then the Sensor icon can go on whatever panel you wish to use for the tablet/phone device. - Nigel Sent: 29

Hello all: Because of space constraints at the layout our club is building we decided to forgo control panels attached to the bench work and use android or iPad tablets.? Panels were built using

All: I have come across some odd behavior on my layout panel this evening. I changed my JMRI panel to reflect a change that was physically made on the layout with a LocoNet turnout. The turnout number

Do you have a LocoNet connection? That won’t explain why RFID tags are being managed by the transponding tag manager, which is what is happening, but it can explain why the file exists in the first

Paul, That is one reason I am confused. I only have rfid readers, no transponding anywhere. The ttansponding files have been created by 4.16. Allen

Allen, Sorry I haven’t responded in a while. I haven’t had a lot of time to look into this. What kind of reader is this again? You should only see Transponding Tags if you are using LocoNet