开云体育

Unless you use Digitrax Transponding or Railcom, you can’t do this. Decoders don’t report back what’s going on, and indeed the command station doesn’t even know that the loco that you’re

This glitch was resolved in JMRi 4.17.3 (or 4.17.4 for sure). One can also resolve the issue in 4.16 by editing two files that are in your USER data and adding the baud rate in the PROFILE.xml

I don't know if I am doing this right as I have not replied to this Forum before, so I may be stepping on some ones toes here, forgive me please. In regards to the the people who are interested in

While helping a friend install JMRI using a brand new Loco Buffer-USB on a Windows 8 computer we saw a note on the RR-Circuits home page indicating an incompatibility with JMRI version 4.16. A call to

Craig,? A PR3 when it is in Standalone mode MUST have a power supply attached to it. When you load the Standalone profile, DecoderPro sets the PR3 for Standalone mode.? Without a power supply

Craig, The PR3 doesn't use an external USB-Serial adaptor. It's inbuilt and reports as a standard USB Modem Class device so doesn't need driver installation either. Have you carefully followed the

Just to let you know that the install did not change. I had trouble deleting several of the registry entries due to a permissions problem. I deleted 2 "Keys" JMRI matches & 9 "Values" JMRI matches. I

oh, and I tried using my digitrax power supply for my DCS52 plugged into the PR3 and it made no difference on getting any reading from the programming track or in the lights on the PR3. Craig

Thanks Marc, I am set up in Stand alone mode, my lights seem to work as you described. I may be wrong but I had all the cables in the same box and only had one power supply for my DCS 52, which I run

That is not a JMRI version issue, that is an "OPPS" on the part of the author of the definition file who added the TSU2 2200.? He mistakenly used those from the ELECTRIC and that is why you see

Bill, 4.16 will cause you troubles with a LocoBuffer-USB. Upgrade to 4.17.4 or wait for 4.17.7 due out very soon now. (don't use 4.17.5 or 4.17.6 either) I'm not saying that this is the cause of your

The web client now supports arrows, bridges, end bumpers and tunnels! ;-) Do you need to download a file to get these decorations, or are they in with the updated JMRI? Thanks,?Scott Clements On

I just downloaded version 4.16 (Windows 7, Loco Buffer-USB) and trying to program a Tsunami2 steam 2200.? How come the NMRA legacy function map does not match that shown in the Soundtraxx manual??

Dave, Thanks for your help I'll try reinstating Sections, Transits and dispatcher, change the colour of my tracks, and upload the xml if it still doesn't work. I probably ought to do some research

Alasdair, Since you have defined the layout structure using Layout Editor, Dispatcher is probably your best choice for automation. Layout Editor based NX is designed to implement NX based

System Details: MERG CBUS using CANUSB for infrastructure control Lenz LZ100 via Lenz USB to run trains I'm using resistive wheelsets and block occupancy detection Points are all SEEP solenoid motors,

Dave, I will uninstall all JMRI references, i.e. programs & registry a little later today. First, I have to clean up the "workspace" while trying to make sense of all the paper I've printed. Almost

Thanks for that Perry. Has been updated now and will usually be incorporated in the next Production release. If you're interested, you can follow the process of this getting into JMRI on GitHub at

Note: the web client does support each block using different colors; you may be able to use that to further distinguish your tracks.

It’s on my to-do list… but pretty far down… :( The panel.js file need some major refactoring… but without any way to write test cases it’s very fragile… at the very least I’d like to see