开云体育

Jon: I forgot to say I'm trying to program a loco with a Lenz decoder and DSX sound decoder install and sitting on the programming track. I heard somewhere that I should program each separately. Bill

Jon: Still trying to get pass the Timeout error. 1. Yes, I can program loco's using the throttle with the locobuffer not connected. 2. When I reconnect the locobuffer to the loconet and the PROG A&B

Jon I have a loco buffer and I do see Programming track is available on loco monitor Wendell

Bob J, I don't know if I've uncovered a bug in version 1.1 or if I'm having trouble programming a 4-digit address simply because I don't understand the mechanics behind doing so. During reprogramming

Wendell, Ok you are making progress. I forgot what is your computer interface, a LocoBuffer or MS100? Lets try a few things similar to what we are testing with Bill Rogers. Under "Debug" bring up the

jon I don't like being a pain but Ijust down load 1.1 I finaly see the test track or program on main my preferences seam to be set right but when I hit the write button I still get timeout taliking to

Wendell, This is a very old version, DecoderPro is now at version 1.1. The version on your machine,1.0.6 is four versions down!

Jim, I'm also a DB150 user and concur with your very detailed explanation of DecoderPro's operation. Turning Track Power back on at the end of a programming cycle is a great idea BTW. You've now got

Jim I did the down load and installed still no joy decoder pro starts up showing 1.0.6 don't if this right ,still get error time out talking to command station, still didn't see where to choose pro

Michael, You'll see all those lighting functions in the other SoundTraxx decoder files. In fact they were in previous versions of the LC decoder files too. It looks like the LC-Diesel and LC-Steam

I've noticed some omissions on the Soundtraxx DSD-AT100LC programmer. One the light tab, there is only on/off and dimmable for light effects. The LC decoder support 15 effects, using CV49 & CV50 bits

Wendell... Sounds like you don't have the latest version of DecoderPro. Go to: http://prdownloads.sourceforge.net/jmri/ Scroll about half way down and download the file JMRI.1.1.exe. Install as usual

"stopping due to error: timeout talking to command station". Thanks.< Disconnect the plug from the LocoBuffer where it connects to the DCS100 and plug the throttle in. Program with the throttle, does

Jon: WHen I use the IDENT button (middle of the screen), I get the error "stopping due to error: timeout talking to command station". Thanks. Bill

If you can get LocoNet data I think this means that the LocoBuffer, DecoderPro, and DCS100 are talking. How are you selecting the engine/decoder? Will the DecoderPro select the decoder that is in the

Jim I have my decoder pro on my home pc so I have to take my db150 and my test track to computer so I am not on layout the track outputs are to test track Also When I open decoder pro I have yet to

Bob I am getting time out talking to station Its adb150 I know I can't read the cvs but understood can write cvs Others on users list was sure I can I want use this program I do intent to but digitrac

After a couple of months of using the DB-150 (Empire Builder) and DecoderPro/LocoBuffer combination, I can report that it works great! I mostly don't miss the read capability -- I've adapted to seeing

Hi John or anyone: Bill here, the one with the problem. I've been trying to program a decoder and not having any luck. I get the "Program Error: Timeout talking to Command Station". It's trying to

Wendell, I know Bob has done testing with an Empire Builder but I'm not sure what is supposed to happen. Bob will have to comment on this. Jon Miller AT&SF For me time has stopped in 1941 Digitrax DCC